Medium Tension Smoveholder with Type L Adjustable, Black

Medium Tension Smoveholder For Cabinet Doors

Medium Tension Smoveholder with Type L Adjustable, Black is a one piece soft-close device that slows cabinet doors, which helps reduce slamming in everyday use. The soft-close device is suitable for frame or frameless cabinets, so it can be used across different cabinet constructions in the same project. It can be used with either Salice "S" Series or 200 Series face frame applications, giving flexibility when you work with these hinge families. Three models offer varying resistance levels to adapt to varying door styles, weights, and overlay applications, so you can match the resistance to the specific door. This model provides medium tension, which fits mid-range door sizes within that system. Additional tension adjustment is provided by tightening or loosening the adjustment screw on the Type L Smove, so you can fine-tune the closing action on site.

Soft-Close Adapter Details That Support Workflow

• The one piece soft-close device design keeps the soft-close function in a single component, which simplifies handling on the bench and speeds repeated installations on multiple cabinets.
• Suitability for frame or frameless cabinets means the same soft-close device can be applied across mixed cabinet runs, helping keep parts standardized on a job.
• Use with either Salice "S" Series or 200 Series face frame applications ties the device directly into those hinge lines, which helps align soft closing with existing hinge layouts.
• Three models with varying resistance levels let you select the right resistance for different door styles, weights, and overlay applications, supporting more consistent closing speeds across a kitchen or bank of cabinets.
• Additional tension adjustment through the Type L Smove adjustment screw allows small on-site tweaks to the closing feel, which helps dial in performance after doors are hung and aligned.
• Non handed design means one Smove works for either left or right side mounting, which reduces part sorting and orientation checks during installation.

Mounting And Positioning For Soft-Close Device

The Type L Smove is attached using two common #6 x 5/8" wood screws, so it fastens to standard cabinet materials without special fasteners. Precise positioning is established using the integrated front locator tab, which helps set the device in the correct forward position relative to the cabinet front. Precise, consistent positioning from the cabinet side is provided by assembly tabs, which support repeatable alignment when installing multiple units. Only 1 Smove Type L is required per door, which simplifies layout and counting when planning a run of cabinets.

Using This Salice Smoveholder In Real Projects

Where This Soft-Close Adapter Is Applied

This soft-close adapter is categorized under Hinges | Hinge Accessories, so it is intended to work alongside hinge hardware rather than replace it. As a soft-close adapter in the Salice Smove line, it operates as an add-on device that slows the door near the end of travel. Suitability for frame or frameless cabinets expands its use across kitchens, baths, and casework that may mix these construction types in a single installation. Compatibility with Salice "S" Series and 200 Series face frame applications aligns it with those commonly used hinge systems, which helps integrate soft closing into existing hinge layouts on face frame cabinets. Non handed configuration allows one device to be mounted on either side of the cabinet, which is helpful when door swing direction varies in a layout.

How Adjustment And Design Support Consistent Results

The medium tension version sits in the middle of the three resistance models, which supports general-purpose use where doors fall in a typical weight and overlay range. Within that medium range, additional tension adjustment is provided by the Type L Smove adjustment screw, so installers can fine-tune the resistance after observing how a specific door behaves. The integrated front locator tab establishes a fixed reference at the cabinet front, which helps keep the engagement point between the door and the device consistent from cabinet to cabinet. Assembly tabs referenced from the cabinet side provide another fixed datum, giving a repeatable method when installing multiple units along a run. Attaching with two #6 x 5/8" wood screws offers a straightforward mounting method that fits standard cabinet side thicknesses, which supports reliable holding strength for the soft-close function over repeated door cycles.

Common Questions About Salice Smove D0LHSNG Use

Choose The Right Smoveholder For Your Doors

Salice soft-close adapter Type L medium tension Smove D0LHSNG provides a one piece soft-close device for frame or frameless cabinets, with adjustment through its screw and tabs that support precise positioning. For door runs built around Salice "S" Series or 200 Series face frame applications, this soft-close adapter offers a way to add controlled closing using a single device per door, with mounting by two #6 x 5/8" wood screws to integrate into standard cabinet construction.