Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Veneer Core from States Industries is a 3/4 inch thick domestic maple panel that provides a stable sheet for cabinetry or millwork where a natural maple appearance is desired. The natural maple face gives a light, uniform wood look that works well when a project calls for a clear or stained finish in shop-built work. The panel uses a western fir veneer core, so it remains relatively light for its size while offering a consistent structure for machining and handling on typical woodworking equipment. The unfinished surface lets you sand, stain, or topcoat to match surrounding components on site or in the shop. A C-3 grade face and back balance appearance with practicality, supporting applications where a sound maple surface matters but ultra-premium grading is not required. The 48.5 x 96.5 inch size offers slightly oversize dimensions, which supports trimming edges clean after layout and cutting.
This States Industries maple plywood panel is specified at 3/4 inch thickness, giving a familiar dimension for cabinet sides, shelves, and structural components that are designed around standard hardware and layout practices. The 48.5 x 96.5 inch sheet size provides extra material beyond a nominal 4 x 8 footprint, supporting clean squaring cuts and edge trimming where factory edges might be removed during layout. The unfinished natural maple face and back allow sanding sequences and finish systems to be chosen to match shop standards, so finishing can be integrated with existing stain colors or clear coats. The veneer core construction supports machining for dados, rabbets, and cutouts where a predictable core structure helps maintain clean edges and stable joinery.
This plywood hardwood veneer core panel uses domestic maple in a natural whole piece face, which suits interior woodworking where a continuous maple appearance is preferred across cabinet fronts or exposed case ends. The whole piece face means the visible maple surface is not composed of narrow strips, so large panels can read as a single broad expanse of grain after finishing. The C-3 grade face and back align with work where a sound, serviceable maple surface is needed without the tighter defect limits of higher grades, supporting shop-built furniture, cabinetry, and fixture components. With western fir veneer core construction, the sheet is well suited for projects that balance strength and weight, such as tall cabinet sides or wide shelving panels in built-ins. The 48.5 x 96.5 inch format offers layout flexibility when nesting multiple parts, helping yield patterns that take advantage of the slightly oversize dimensions.
The specified two step layup process starts by laminating inner plies onto a blank, providing a stable interior structure before the visible veneers are applied, which helps panels respond more evenly during machining. By puttying surface knots or slips on the inner plies prior to overlay, the construction reduces irregularities directly beneath the face, lowering the chance that those areas telegraph through during sanding or finishing. The intermediate sanding of the blank before applying face and back veneers promotes consistent glue contact, supporting uniform bond strength across the sheet, which is important when panels are cut into narrow strips or complex shapes. Once face and back veneers are overlaid, the panel gains a balanced build that helps maintain flatness as humidity changes in normal interior environments, reducing the effort required to pull components into alignment during assembly. The process is described as ensuring smoothness of the surface and consistency of the panel thickness, which supports predictable setup on saw fences, CNC beds, and edge banding equipment.
This States Industries panel measures 48.5 x 96.5 inches, so it offers slightly oversize coverage that supports trimming to final dimensions and cleaning up factory edges during layout and cutting.
The panel has a 3/4 inch thickness, giving a familiar cabinet-grade dimension that works well for case sides, shelves, and structural components in typical woodworking projects.
Whole piece face means the natural maple face veneer is a single continuous piece rather than narrow strips, which helps large surfaces present a more uniform grain appearance after finishing.
This plywood uses a western fir veneer core, giving a stable, wood-based interior that supports common machining operations and provides a balance between strength and weight.
The two step layup process with puttied inner plies and pre-sanding helps create a smoother base before veneers are applied, which supports an even face ready for sanding and finishing.
C-3 grade refers to a practical face and back quality suited to many cabinet and furniture projects, balancing appearance needs with cost for shop and trade applications.
This States Industries plywood hardwood veneer core sheet combines domestic natural maple faces with a western fir veneer core, giving you a 3/4 inch panel built for interior woodworking. The two step layup with puttied inner plies, intermediate sanding, and overlaid veneers results in a surface and thickness profile tailored to predictable shop work. The 48.5 x 96.5 inch, whole piece face, C-3 grade construction supports cabinets, fixtures, and furniture where a sound maple look and consistent machining behavior are important. For projects that call for a natural maple appearance on a veneer core platform, this panel offers a defined set of characteristics you can plan around from layout through finishing.
Sold In: 1 Sheet
