Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
INCLUDES: CPR-G gun, 4 needle/nozzle setups, 2 air caps, 1 qt aluminum cup and case
CPR-G gravity gun compliant kit combines the transfer efficiency of HVLP with the speed and finish quality of conventional air spray, so spraying jobs move quickly while material use stays controlled. The CPR-G-W gun is a compliant spray gun from C.A. Technologies, giving a familiar air-spray style pattern with HVLP-level transfer efficiency for productive shop work. The 1 quart aluminum gravity cup positions material above the gun, helping maintain consistent feed during extended passes on doors, panels, and trim. The CPR-G gun uses nozzle setups that require 11 cfm at 29 psi recommended inlet pressure, so airflow and pressure needs are clearly defined for planning air supply. This compliant kit sits in the spray guns category under spray equipment, aligning it with typical professional finishing workflows in woodworking and similar environments.
The CPR-G-W spray gun operates with nozzle setups requiring 11 cfm at 29 psi recommended inlet pressure, so once the air source matches that requirement, airflow and atomization stay within the intended performance range. The air inlet is specified as 1/4 NPS, giving a defined thread pattern for connecting air hoses or shop drops in a standard way. The fluid inlet of 16mm x 1.5mm ties the gun to the aluminum gravity cup, keeping the fluid connection consistent across finishing sessions. Because the CPR-G gravity gun compliant kit is designed to combine HVLP transfer efficiency with conventional air spray speed and finish quality, it fits well into production finishing where both output and coating use are priorities.
The CPR-G gravity gun compliant kit sits in the spray equipment category under spray guns, placing it in line with tools used for professional coating of wood components and related substrates. By combining the transfer efficiency of HVLP with the speed and finish quality of conventional air spray, the CPR-G-W gun supports shops that need both throughput and consistent surface appearance on repeated parts. The 1 quart aluminum gravity cup mounts above the CPR-G-W gun, providing a gravity-fed supply that suits medium-length runs where refills are periodic but not constant. With its 1/4 NPS air inlet, the CPR-G gravity gun connects into typical shop air systems that already use that thread standard, streamlining integration at a workstation or spray booth. The fluid inlet of 16mm x 1.5mm standardizes the interface with the aluminum gravity cup, supporting repeatable assembly each time the gun is cleaned and reassembled for another shift.
The CPR-G-W gun uses nozzle setups that require 11 cfm at 29 psi recommended inlet pressure, so once that window is met, atomization behavior remains predictable from job to job. Because the CPR-G gravity gun compliant kit is designed to deliver HVLP-level transfer efficiency with the speed and finish quality of conventional air spray, coating goes reliably to the work surface rather than dispersing unnecessarily, supporting material planning. The defined air inlet of 1/4 NPS and fluid inlet of 16mm x 1.5mm give stable mechanical interfaces, helping keep connections consistent after cleaning or maintenance. Manufacturer part number CPR-G-W clearly identifies this configuration, simplifying ordering and alignment with documentation. The CX10-105 repair kit is specified as the repair kit for this gun, providing a direct reference when internal wear parts need replacement to maintain spray performance over time.
The CPR-G-W gun combines the transfer efficiency of HVLP with the speed and finish quality of conventional air spray, so it supports productive work while directing more coating to the surface.
The CPR-G-W spray gun uses nozzle setups that require 11 cfm at 29 psi recommended inlet pressure, which defines the airflow and pressure needed from the air system for proper operation.
The CPR-G gravity gun uses a 1/4 NPS air inlet, so it connects to air hoses and fittings that match that thread size in a typical spray setup.
The CPR-G-W spray gun uses a fluid inlet of 16mm x 1.5mm, providing the threaded connection that mates with the aluminum gravity cup during setup.
The CPR-G-W spray gun uses repair kit CX10-105, which aligns with this model for servicing internal components when wear affects spray performance.
The CPR-G-W gun is identified by manufacturer part number CPR-G-W and is described as a CPR gravity gun compliant kit, which helps match documentation and parts.
The CPR-G gravity gun compliant kit, identified as CPR-G-W, is positioned for shops that value HVLP transfer efficiency with conventional air spray speed and finish quality. With 11 cfm at 29 psi recommended inlet pressure and a 1/4 NPS air inlet, its operating window and connections are clearly defined. The 1 quart aluminum gravity cup and 16mm x 1.5mm fluid inlet support a stable gravity-feed layout for repeated coating runs. For ongoing service, the CX10-105 repair kit directly matches this CPR-G-W gun, keeping the setup aligned with documented components.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CX10-105 Mfr# 10-105 | Jaguar/CPR Gravity Gun Repair Kit 10-105 |