
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
CPR-T3 Gravity Fed Spray Gun uses an economy version of the compliant spray technology, so it delivers compliant-style performance while helping control equipment cost on finishing jobs. This C.A. Technologies spray gun can be used to spray a wide range of coatings, which lets one gun handle different materials across a shop. Needle/nozzle setups of 0.8 mm, 1.3 mm, and 1.7 mm give flexibility to match or change setups for different coating viscosities and film builds. Air caps CPR2101 at 11 cfm and HVLP1301 at 13.5 cfm at 29 psi provide two airflow options so air usage can be balanced with finish quality requirements. Plated brass passages resist corrosion from coatings and cleaning fluids, which helps maintain smooth internal flow over time. A non-replaceable head insert simplifies the gun head construction, which keeps the working end of the gun consistent from job to job.
Air inlet size of 1/4 inch NPS on the CPR-T3 Gravity Fed Spray Gun matches a common compressed air connection, which streamlines hookup on typical shop air lines. Fluid inlet size of 16 mm x 1.5 mm defines the thread interface, which guides selection of a compatible cup or fluid connection in finishing systems. Needle/nozzle setups at 0.8 mm, 1.3 mm, and 1.7 mm adjust fluid flow and pattern potential, which helps dial in output for thin or heavier coatings. CPR2101 11 cfm and HVLP1301 13.5 cfm air caps at 29 psi define both air volume and pressure needs, which supports planning of compressor capacity and regulator settings around the gun.
The CPR-T3 Gravity Fed Spray Gun belongs in spray equipment and spray guns applications, which suits finishing tasks in woodworking or similar environments that need controlled coating application. The economy version of the compliant spray technology suits operations wanting compliant-style spray characteristics while managing tool cost in multi-station shops. Capability to spray a wide range of coatings positions the CPR-T3 spray gun for use across primers, sealers, and top finishes, which supports standardized technique from prep to final coat. Needle/nozzle setups in 0.8 mm, 1.3 mm, and 1.7 mm let the same gun serve both finer-detail work and broader coverage, which reduces the number of separate guns assigned to different material types.
CPR2101 air cap at 11 cfm and HVLP1301 air cap at 13.5 cfm at 29 psi define specific air consumption and pressure levels, which helps tune regulators and air system design for repeatable atomization. Plated brass passages carry coatings through corrosion-resistant channels, which maintains smoother internal surfaces that support stable spray patterns over repeated cleaning and use cycles. The non-replaceable head insert fixes the gun head geometry, which keeps fan shape and atomization behavior consistent each time the CPR-T3 Gravity Fed Spray Gun is set up on returning jobs. A repair kit, CX60-T27, with a needle seal assembly that includes housing, o-ring, and spring provides a defined service part, which supports planned maintenance of the needle seal area to retain trigger feel and fluid control.
CPR-T3 Gravity Fed Spray Gun uses an economy version of the compliant spray technology, which supports compliant-style atomization characteristics for finishing work.
The CPR-T3 Gravity Fed Spray Gun can be used to spray a wide range of coatings, which allows one gun to cover different materials in a shop.
The CPR-T3 Gravity Fed Spray Gun uses 0.8 mm, 1.3 mm, and 1.7 mm needle/nozzle setups, which support different coating viscosities and film build requirements.
The CPR-T3 Gravity Fed Spray Gun uses CPR2101 air cap at 11 cfm and HVLP1301 air cap at 13.5 cfm at 29 psi, which define airflow and pressure needs.
The CPR-T3 Gravity Fed Spray Gun has a 1/4 inch NPS air inlet and a 16 mm x 1.5 mm fluid inlet, which define connection interfaces to air and material supply.
The CPR-T3 Gravity Fed Spray Gun uses repair kit CX60-T27, with needle seal assembly including housing, o-ring, and spring, which supports targeted needle-area maintenance.
CPR GRAVITY GUN COMPLIANT SETUP pairs the CPR-T3 Gravity Fed Spray Gun with needle/nozzle setups of 0.8 mm, 1.3 mm, and 1.7 mm plus CPR2101 and HVLP1301 air caps at 29 psi, so one gun layout addresses varied coating demands. Plated brass passages and a non-replaceable head insert keep internal flow paths and head geometry defined, which supports consistent spray results across recurring jobs. For operations needing an economy version of the compliant spray technology that can be used to spray a wide range of coatings, this C.A. Technologies spray gun provides a clear, spec-based option for daily finishing work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CX60-T27 Mfr# 60-T27 | Spray Gun Repair Kits - C.A. Technologies 60-T27 |