Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
J100H HVLP gun is a general purpose gravity feed spray gun intended for wood finishing, so it suits cabinet, furniture, and millwork spraying where controlled coating delivery matters. The gravity feed design works with the 1 quart aluminum gravity cup, which positions material above the gun body so finishes flow consistently during passes. All stainless steel fluid passages handle wood coatings while resisting internal wear, helping maintain a clean material path. The gun uses low volume nozzles for small HP compressor use, which lets shops run the J100H with modest air supply while still meeting HVLP performance. It complies with all HVLP environmental regulations, so airflow and pressure stay within regulated HVLP limits during finishing operations. An air inlet of 1/4" NPS connects to common shop air lines, while the 16 mm x 1.5 mm fluid inlet threads match the supplied cup interface for secure material flow.
The J100H gravity feed gun uses a 1/4" NPS air inlet, so it connects directly to air lines terminated with that standard thread, helping streamline gun setup on typical spray benches. The fluid inlet is 16 mm x 1.5 mm, matching the threaded connection on the 1 quart aluminum gravity cup, so the cup threads firmly into the gun body for a rigid, leak-resistant fit. The HVLP design works with low volume nozzles for small HP compressor use, which means setup planning can account for lower air draw at the compressor during operation. All stainless steel fluid passages present a smooth internal path for finishes, which supports even material delivery once the gun is connected and pressurized.
The J100H gravity feed gun is intended for wood finishing, so it fits work such as spraying clear or pigmented coatings on doors, casework, and trim in woodworking shops. The general purpose gravity feed layout supports a variety of finish viscosities commonly used on wood, giving flexibility across primers and topcoats that fall within HVLP spray ranges. With its 1 quart aluminum gravity cup, the gun holds a practical volume of material for small to medium runs, reducing refill interruptions on many shop-scale jobs. The stainless steel fluid passages carry these wood coatings through corrosion-resistant metal, which supports repeated exposure to solvent-based cleaners common in finishing rooms.
The J100H HVLP gun uses low volume nozzles for small HP compressor use, which helps maintain stable atomization when air supply capacity is limited, supporting a more consistent fan pattern across panels. Compliance with all HVLP environmental regulations means the gun operates within HVLP airflow and pressure limits, which supports predictable overspray and transfer behavior on production parts. The 1/4" NPS air inlet matches common hose fittings, reducing connection movement that might disturb hand position during long passes. The 16 mm x 1.5 mm fluid inlet secures the 1 quart aluminum gravity cup, helping keep material feed steady as the gun is tilted along edges and profiles. The all stainless steel fluid passages maintain a clean, uniform internal surface, which supports repeatable material flow from job to job after proper cleaning routines.
The J100H HVLP gun is a general purpose gravity feed gun intended for wood finishing, so it suits spraying wood components like cabinets, doors, and trim.
The J100H uses low volume nozzles for small HP compressor use, so it operates within the limits of modest compressors often found in smaller woodworking shops.
The J100H gravity feed gun has a 1/4" NPS air inlet, which connects to common shop air hoses using that standard thread size.
The J100H uses a 1 quart aluminum gravity cup, providing enough capacity for many small to medium wood finishing runs without frequent refilling.
The J100H features all stainless steel fluid passages, so wetted internal parts that contact the finish are stainless steel surfaces.
The J100H gun complies with all HVLP environmental regulations, so its operating parameters align with regulated HVLP spray requirements.
The J100H HVLP gun brings a general purpose gravity feed design intended for wood finishing, so it fits many cabinet and millwork jobs. Its 1 quart aluminum gravity cup and all stainless steel fluid passages support steady coating delivery during production passes. Low volume nozzles for small HP compressor use align with shops running compact compressors, while 1/4" NPS air and 16 mm x 1.5 mm fluid inlets integrate with standard connections. Selecting this CP-J100H-W spray gun puts an HVLP-compliant tool into the finishing workflow for consistent wood coating applications.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CX10-105 Mfr# 10-105 | Jaguar/CPR Gravity Gun Repair Kit 10-105 |