Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
FE LCFM HVLP gun kit is a low CFM lightweight ergonomic spray gun designed for fine finish applications, so it supports detailed coating work where control and surface quality matter. The FE-Line LCFM design is classified as a fine finish spray gun, which helps deliver smoother film build on cabinetry, millwork, and other detail jobs. Needle/nozzle setups at 0.8 mm, 1.3 mm, and 1.7 mm allow one gun body to handle thin stains through heavier topcoats, reducing tool changes between steps. Air caps 1090 (6 cfm) and 1093 (10 cfm) pair with these setups so airside performance can be matched to material and flow needs. The ergonomic, lightweight layout reduces strain over long spray sessions, which matters when spraying interiors, panels, or runs where consistent hand control is critical.
The FE-Line LCFM HVLP spray gun uses a 1/4" NPS air inlet, which connects the gun to standard air hose fittings so the air side can be tied into an existing line quickly. A 3/8" NPS fluid inlet connects the gun to pressure feed systems, supporting continuous material delivery on production runs. The 1090 air cap draws 6 cfm, so it can be operated with a 2 hp compressor where air capacity is limited. The 1093 air cap uses 10 cfm, giving an alternate setup when more air volume is available for different spray demands. By matching needle/nozzle sizes and air caps to coatings, the gun can be tuned for a stable pattern without changing core air or fluid connections.
The HVLP Guns FE-Line LCFM fine finish design positions this gun for work where surface quality on wood products is essential, such as cabinetry and detailed millwork. The combination of 0.8 mm, 1.3 mm, and 1.7 mm needle/nozzle setups lets a finisher move from thin dyes or sealers through mid-viscosity lacquers to heavier build materials using the same gun body, which streamlines bench-to-booth workflow. Paired air caps, 1090 at 6 cfm and 1093 at 10 cfm, give flexibility for both small-shop and higher-air environments, so the same model fits varied booth configurations. Low air consumption design around the 1090 cap means a 2 hp compressor can support HVLP spraying, which is especially useful in compact shops or jobsite-style setups where air capacity is constrained.
The FE LCFM HVLP gun kit structure groups FELCFM gun, needle/nozzle setups in 0.8, 1.3, and 1.7, and air caps into defined kit formats CXCPFELCFM, CXCPFELCFM-303R2, and CXCPFELCFM-PPSR2, so component combinations are standardized for repeat setups. The low CFM, lightweight ergonomic spray gun layout reduces operator fatigue, helping maintain a consistent hand speed and distance across panels, which supports uniform sheen and film thickness. Clearly defined air inlet and fluid inlet sizing at 1/4" NPS and 3/8" NPS mean every install or changeover repeats the same connection pattern, limiting variability in hose routing and fluid delivery. The availability of repair kit CX10-140 ties service parts to this specific gun family, which supports keeping a familiar tool in service rather than changing models and retraining spray technique.
The HVLP Guns FE-Line LCFM gun is described as a fine finish spray gun, so it is intended for applications where detailed, higher-quality surface finishes on wood products are important.
The FE LCFM HVLP gun with the 1090 air cap uses 6 cfm, so it can be operated with a 2 hp compressor, allowing HVLP spraying in shops with modest air capacity.
The FE LCFM HVLP spray gun is configured with 0.8 mm, 1.3 mm, and 1.7 mm needle/nozzle setups, covering a range from thinner coatings to heavier finishes for different finishing stages.
The FE-Line LCFM gun uses air caps 1090 at 6 cfm and 1093 at 10 cfm, providing choices for lower or higher air volume setups depending on compressor capacity and spray requirements.
The FE LCFM HVLP gun has a 1/4" NPS air inlet and a 3/8" NPS fluid inlet, so it connects to standard air and fluid lines used in many finishing systems.
The FE LCFM HVLP spray gun is supported by repair kit CX10-140, which links service parts to this model so the same gun can be maintained over time.
The C.A. Technologies FE LCFM HVLP gun kit combines low CFM operation, defined 0.8 mm, 1.3 mm, and 1.7 mm needle/nozzle setups, and 1090 and 1093 air caps into a fine finish-focused spray tool. With air inlet and fluid inlet sizes at 1/4" NPS and 3/8" NPS and the ability to run the 1090 air cap at 6 cfm with a 2 hp compressor, it aligns well with wood finishing environments that demand consistent results from compact air systems. Putting this configuration to work helps standardize finish stages while staying within existing compressor and line layouts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CX10-140 Mfr# 10-140 | GUN REPAIR KIT 10-140 For C.A. Technologies |