Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Panther P100G conventional spray gun is a general purpose conventional air spray gun designed for glue and adhesive applications, so it gives installers a focused tool for spraying these thicker materials. The gun uses a standard solvent based setup specified as 1.8 x 1590, which defines the needle and nozzle sizing for consistent flow and atomization in typical adhesive jobs. The body and air cap are Teflon anodized, creating a surface that resists sticking and build-up, which supports quicker clean-up and steady performance during repeated spraying. A special air cap and fluid nozzle are designed to prevent product shearing, so the adhesive maintains its intended properties as it leaves the gun. The design is targeted at glue and adhesive work, aligning the internal geometry and setup with common shop and site applications.
The Panther P100G conventional spray gun uses a 1.8 x 1590 setup, tying the needle and nozzle sizing to a known configuration that supports consistent adhesive delivery. The air inlet is listed as 1/4" NPS, providing a defined thread standard for connecting to the air supply lines in a shop system. The fluid inlet is 3/8" NPS, setting the thread size for adhesive feed connections and helping match hose fittings during installation on carts or fixed lines. The gun requires 12.5 CFM, so air system planning can align capacity with this demand for steady spraying. A repair kit is referenced as CX10-110, indicating a defined service kit for maintaining the spray gun assembly over time.
The Panther P100G gun is described as a general purpose conventional air spray gun designed for glue and adhesive applications, so it fits work where adhesives are applied by spray instead of by hand. Its standard solvent based setup of 1.8 x 1590 defines a configuration that supports repetitive adhesive patterns on similar parts. The air inlet of 1/4" NPS connects the gun into compressed air systems built around that thread standard, aligning with common fittings in many shops. The 3/8" NPS fluid inlet matches adhesive feed lines that use this thread size, simplifying integration into existing glue delivery systems. The body and air cap being Teflon anodized support environments where overspray and adhesive build-up are frequent, because surfaces are engineered for easier cleaning. The referenced repair kit CX10-110 provides a structured path for service when wear components need replacement.
The special air cap and fluid nozzle are designed to prevent product shearing, which means the Panther P100G gun is engineered so adhesives travel through the gun with reduced internal disruption, supporting more consistent laydown. This same 1.8 x 1590 setup fixes the relationship between needle and nozzle, so pattern behavior can be understood and repeated across runs. Teflon anodizing on the body and air cap promotes easy clean-up and longer life, and this surface treatment helps maintain orifice condition by limiting buildup that could affect atomization. The requirement of 12.5 CFM gives a clear air demand, allowing air system capacity to be aligned with the gun for steady performance during continuous use. Identifying the gun as a C.A. Technologies Panther P100G with manufacturer part P100G-18-1590 ties the tool to a specific model, which supports consistent selection, replacement, and maintenance planning.
The Panther P100G gun is described as a general purpose conventional air spray gun designed for glue and adhesive applications, so it focuses on spraying adhesive products rather than general coatings.
The Panther P100G uses a standard solvent based setup of 1.8 x 1590, which defines the needle and nozzle configuration and supports consistent flow and spray patterns for adhesive work.
The Panther P100G body and air cap are Teflon anodized for easy clean-up and longer life, so adhesive residue releases more easily and critical surfaces resist wear during repeated spraying.
The Panther P100G gun lists a 1/4" NPS air inlet and a 3/8" NPS fluid inlet, providing specific thread standards for connecting to compressed air and adhesive supply lines.
The Panther P100G conventional spray gun requires 12.5 CFM, so air supply planning can align compressor and line capacity with this demand for continuous adhesive spraying.
The Panther P100G gun lists repair kit CX10-110, providing a defined kit reference when servicing wear components in the spray gun assembly.
The Panther P100G conventional spray gun combines a 1.8 x 1590 setup with a design focused on glue and adhesive applications, tying the hardware to this specific task. Teflon anodized body and air cap support easy clean-up and longer life during regular use. The 1/4" NPS air inlet, 3/8" NPS fluid inlet, and 12.5 CFM requirement give clear connection and air demand details for shop planning. With its special air cap and fluid nozzle designed to prevent product shearing, this C.A. Technologies Panther gun offers a defined configuration for adhesive spraying workflows.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CX10-110 Mfr# 10-110 | Panther Repair Kit For P100G Series Guns |