1.5mm spacer for MDF 861 is a clear, slotted hinge spacer from Grass America designed for use with MDF 861 hinges. This spacer has a 1.5 mm thickness, matching 1/16 inch, so it adds a predictable offset between the hinge and the MDF substrate during installation. The slotted design for MDF 861 hinges positions the hinge consistently relative to the board, which supports accurate door alignment on MDF cabinet constructions. As part of the hinge spacers and wedges class, it serves as a dedicated component for dialing in hinge position rather than improvising with shims. The clear material keeps the spacer visually unobtrusive at the hinge, which helps maintain a clean look around the hardware while still giving you a defined build-out behind the hinge cup or plate.
The 1.5 mm (1/16 inch) dimension on this Grass America spacer defines exactly how much build-out it adds under the MDF 861 hinge, which lets installers calculate door reveals and clearances with that offset already factored in. Because the part is slotted for MDF 861 hinges, it aligns with the hinge layout instead of floating, which supports repeatable positioning when installing multiple hinges along a stile or panel. As a hinge spacer and wedge, it functions as a fixed shim layer, so once the hinge screws are tightened, the hinge sits on a known thickness rather than compressible material.
This clear 1.5 mm spacer for MDF 861 is intended for hinge locations that use MDF 861 hinges, so it becomes part of the hinge stack at those mounting points. In MDF cabinet construction where that hinge series is installed, the slotted configuration aligns the spacer with the hinge footprint, helping keep each hinge seat consistent on repeat runs of doors or panels. As a hinge spacer and wedge, it functions directly at the hinge interface on MDF work, setting the hinge off the surface by a defined 1.5 mm amount wherever the spacer is used across the run.
The defined 1.5 mm (1/16 inch) thickness on this Grass America 00209-42 spacer standardizes the offset behind MDF 861 hinges, so every hinge that uses it shares the same build-out, which supports even reveals across cabinets that repeat that hinge configuration. The slotted design for MDF 861 hinges also gives the spacer a controlled position relative to the hinge, which reduces variation that can happen with loose shims and keeps the hinge geometry consistent. Because the part is clear and belongs to the hinge spacers and wedges product class, it stays visually neutral around the hardware while still acting as a purpose-built spacing layer in the hinge assembly.
The 1.5mm spacer for MDF 861 is slotted specifically for MDF 861 hinges, so it aligns with that hinge layout during cabinet or door installation.
The Grass America 00209-42 spacer has a 1.5 mm thickness, identified as 1/16 inch, which sets a fixed offset behind MDF 861 hinges for predictable spacing.
The spacer is described as clear, so it presents a neutral appearance around the MDF 861 hinge area while still providing the 1.5 mm build-out.
The slotted design for MDF 861 hinges positions the spacer with the hinge footprint, which supports consistent hinge placement across multiple MDF doors or panels.
This Grass America part is in the hinge spacers and wedges product class, defining it as a dedicated spacing component for hinge installations.
The manufacturer part number is 00209-42, which identifies this specific 1.5 mm clear, slotted spacer for MDF 861 hinges from Grass America.
The 1.5mm spacer for MDF 861 from Grass America provides a clear, slotted 1.5 mm (1/16 inch) offset tailored to MDF 861 hinges, so hinge locations share a known build-out. For runs that repeat that hinge series on MDF, using this defined hinge spacer and wedge supports consistent hinge geometry from cabinet to cabinet.
Sold In: 1 Each