Grass TEC 864 Self-Close 3/4" Overlay Face-Frame Hinges Nickel, 108° Dowel, 02877-15
Description
Grass TEC 864 Self Close Hinge For Face Frames
Grass TEC 864 self close hinge describes a concealed cabinet hinge designed for 3/4 inch overlay face-frame doors, giving you a clean exterior while controlling the door swing on framed cabinets. The hinge belongs to the concealed cabinet hinges class, so it mounts inside the cabinet and keeps hardware out of sight, which helps finished jobs look streamlined in kitchens or built-ins. As a self close hinge, it pulls the door into the closed position at the end of travel, which reduces doors left ajar in everyday use. The face-frame hinge design aligns with common North American framed cabinet construction, helping installers match existing jobs that use a frame around the opening. The hinge is identified as TEC 864, which links it directly to the Grass America TEC 864 family, allowing shops to standardize around a known hinge group.
Key Hinge Details That Support Cabinet Work
- The 3/4 inch overlay configuration positions the door so it covers three-quarters of the face frame, which is a common reveal that helps installers line up new doors with existing cabinet runs.
- The face-frame hinge category means it is intended for framed cabinet openings, letting you plan layouts and drilling patterns around a frame rather than frameless side panels.
- The self close function brings the door shut at the end of its travel, which can cut down on callbacks related to doors drifting open and helps keep lines even across a bank of cabinets.
- The concealed cabinet hinge class keeps the hardware hidden when the door is closed, supporting clean visual lines that many residential and commercial customers expect on upgraded projects.
- The TEC 864 designation ties to a specific Grass America hinge platform, which helps shops match parts by name and part number when reordering or expanding an existing installation.
Face-Frame Hinge Setup For 3/4 Inch Overlay
The 3/4 inch overlay detail means the door covers most of the face frame, so layout work focuses on maintaining a consistent reveal along the frame edge. As a face-frame hinge, it is suited to cabinets built with a front frame, simplifying hinge selection when matching typical kitchen or bath construction. The 108 degree description defines the door opening angle, giving doors a wide, usable swing without over-rotating into adjacent cabinetry in many standard layouts. Being part of the concealed cabinet hinge class, it mounts so that the hinge is hidden when the door is closed, supporting clear interior access while maintaining a clean exterior appearance.
Using This TEC 864 Hinge In Cabinet Projects
Where This 3/4 Overlay Hinge Fits Best
This hinge is identified as a 3/4 inch overlay face-frame hinge, so it fits projects where the door is intended to overlap the face frame by that amount, such as many framed kitchen and bath cabinets. The face-frame hinge category indicates use on cabinets that have a front frame, aligning the hardware with common North American cabinet box construction. As part of the concealed cabinet hinges product class, it suits projects where visible surface hardware is not desired, which is typical in higher-end residential and commercial millwork. The Grass America branding ties it to a recognized hinge manufacturer, which helps shops align this part with other Grass hinge lines already specified in their standards.
Details That Support Repeatable Door Alignment
The self close characteristic helps doors seat consistently, so gaps at the frame tend to stay more uniform once doors reach the closing point. The 3/4 inch overlay specification gives installers a defined target for door coverage over the face frame, which supports repeatable reveals across multiple openings in a run of cabinets. The 108 degree reference sets a predictable opening angle, so designers and installers can account for swing clearance against walls, appliances, or neighboring doors. The concealed cabinet hinge classification means the hinge operates inside the cabinet envelope, which allows doors to be aligned without external hinge leaves altering the visual reveal line along the frame. The manufacturer part number 02877-15 links directly to this configuration when ordering, helping shops reduce mix-ups between different overlay or opening-angle versions within the TEC family.
Common Questions About This TEC 864 Hinge
What type of cabinets use this TEC 864 hinge?
The hinge is described as a 3/4 inch overlay face-frame hinge, so it is intended for framed cabinet constructions where the door overlays the face frame.
How does the 3/4 inch overlay affect door layout?
The 3/4 inch overlay means each door covers three-quarters of the face frame width, guiding hinge placement and door sizing to keep reveals consistent across a cabinet run.
What does 108 degree mean for this cabinet hinge?
The 108 degree description indicates the approximate door opening angle, providing a wide swing that installers can factor into clearance planning around adjacent components.
Is this hinge considered a concealed cabinet hinge?
The product class is concealed cabinet hinges, so the hinge is designed to be hidden from view when the cabinet door is closed, supporting a clean appearance.
What role does the self close function play?
The self close function pulls the door into its closed position near the end of travel, helping doors stay shut and maintaining visual alignment on finished cabinets.
How does the Grass America branding help in projects?
Grass America branding links this hinge to a known hinge family, making it easier for shops to match specifications and reorder using the TEC 864 and 02877-15 identifiers.
Selecting This Hinge For Face-Frame Jobs
This Grass TEC 864 self close 3/4 inch overlay face-frame hinge serves framed cabinet projects that call for concealed hardware, defined overlay, and a 108 degree opening angle. The hinge aligns with the concealed cabinet hinges class and carries the 02877-15 part number, which aids in specification and reordering through Wurth Baer Supply. When a project needs a 3/4 inch overlay face-frame layout with self closing action and a hidden hinge design, this TEC 864 configuration provides a focused option to keep door reveals, swing, and appearance consistent across the job.