Capital City Counters edge moldings 3517 describes a laminate edge molding designed to finish exposed countertop or similar laminate edges in a consistent 3517 profile from the same series. The Sand Crystall Ethings 12' description ties the molding to a specific decorative look and length, supporting long, uninterrupted runs on matching tops without mid-span transitions. The product sits in Laminate Edge Moldings within Edgebanding & Surfacing, so it works as a decorative transition between a laminate surface and the surrounding environment on cabinetry or counters. The 3517-46 BEVEL FLAT BACK description indicates a bevel detail on the visible face combined with a flat back side that sits against the substrate, giving a defined front edge while maintaining a straightforward bond line. The Capital City Counters brand positions this molding within their coordinated surfacing system for projects that need a matched decorative edge.
The 3517-46 BEVEL FLAT BACK description signals that this Capital City Counters molding uses a beveled front edge with a rear face that remains flat, so the visible side presents a sloped transition while the back provides an even interface to the substrate. As a Laminate Edge Moldings part, that flat back aligns with common laminate-ready edges, helping installers align the molding flush with the laminate plane during bonding. The bevel detail on the 3517 profile defines the transition from the laminate surface out to the front face, supporting a deliberate visual line along counters or similar surfaces. The Sand Crystall Ethings color reference keeps that beveled edge coordinated with the intended decorative scheme, so the visual break at the edge reads as part of the overall laminate design.
The Capital City Counters Edge Moldings 3517 description places this piece in Edgebanding & Surfacing, positioning it as a decorative laminate edge treatment rather than a structural trim. The Laminate Edge Moldings class signals use on laminate-based surfaces such as countertops or casework tops, where the front edge remains visible and benefits from a finished profile. The Sand Crystall Ethings 12' wording ties the appearance and length directly to a specific decorative concept, so the edge profile can track along matching laminate surfaces in the same visual family. Installers working on long runs of laminate counters can apply this 12-foot molding to match the decorative intent from the flat field of the top out to the front edge. Because the 3517 profile is called out by number, it aligns with projects that are specified around that exact Capital City Counters edge shape.
The 3517-46 BEVEL FLAT BACK detail tells you the molding presents a beveled face to the user while the rear surface remains flat, giving a clear orientation during layout so the decorative bevel consistently faces outward. That flat back pairs with laminate-ready substrates, allowing the molding to sit evenly against the core material for a uniform bond line along the entire 12-foot length. As part of the Laminate Edge Moldings class, this geometry is intended to carry the laminate design to the outer edge, supporting a clean visual termination point at the front of the work surface. When paired with Sand Crystall Ethings in the decorative system, the bevel draws the eye along a controlled line that matches the selected surfacing look. The Capital City Counters 3517 designation lets repeat projects call out the same profile and appearance, supporting consistent outcomes across multiple installations.
Capital City Counters 3517E is a Laminate Edge Moldings part used as a decorative edge in the Edgebanding & Surfacing category, so it finishes exposed laminate edges on surfacing projects.
The 3517-46 bevel flat back profile uses a beveled front with a flat back surface, so the visible edge shows a defined slope while the rear face sits flat against the substrate.
Sand Crystall Ethings 12' identifies the decorative look and 12-foot length, helping installers run a visually consistent Capital City Counters edge along longer laminate surfaces.
This laminate edge molding belongs to Edgebanding & Surfacing and Laminate Edge Moldings, so it is used on laminate countertops or similar surfaces needing a finished front edge.
The 3517 profile number identifies a specific Capital City Counters edge shape, allowing specifiers and installers to call out the same look across multiple jobs.
The Capital City Counters brand connects this molding to their laminate and surfacing range, supporting projects designed around coordinated decorative countertop edges.
The Capital City Counters Edge Moldings 3517, Sand Crystall Ethings 12', provides a defined 3517-46 BEVEL FLAT BACK profile within the Laminate Edge Moldings class, so it aligns with laminate surfacing work that specifies this exact look. The 12-foot Sand Crystall Ethings description ties length and appearance together, supporting continuous front edges on longer runs. For projects using Capital City Counters decorative laminates, choosing the 3517E molding keeps the edge profile and color in the same system, supporting a unified visual result along exposed laminate fronts.
Sold In: 1 Each