Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Chemguard II pre-cat clear topcoat is a one component, high solids pre-catalyzed Reactive Amino Coating (RAC) that builds film quickly, so professional shops can reach target build in fewer coats and streamline finishing schedules. The 17.23% volume solids allow this clear topcoat to lay down more material per pass, helping reduce labor time on multi-piece runs. As a flat gloss clear, it provides a low-sheen appearance while still sealing the surface, which supports consistent visual results across cabinets, millwork, and other interior wood components. The coating demonstrates very good moisture, household wear, household chemical, and mar resistance, so finished surfaces stand up better to daily use in active rooms. The very clear resins resist ambering when compared to competitors precatalyzed coatings, helping maintain a more stable color tone on lighter woods or light stain systems over time.
This Chemcraft Chemguard II topcoat is a clear, flat gloss, pre-catalyzed coating, which means it lays down with low sheen while still providing sealing and protection, useful where a subdued look is specified. As a one component product, the pre-catalyzed system is built into the coating, so shops work from a single material, simplifying finish room handling compared to multi-component systems. The combination of high solids and fast building behavior lets applicators develop adequate film build within normal application sequences, helping maintain productivity on larger cabinet and architectural woodwork packages.
This pre-catalyzed Reactive Amino Coating is designed as a clear topcoat for wood components where moisture, household wear, household chemical, and mar resistance are important, such as interior cabinetry and architectural woodwork. The flat gloss level provides a low-reflection surface, which is often preferred for large run cabinet faces and millwork because it reduces glare while still showing the character of the substrate. The very clear, low-ambering resin package helps support color-critical applications on pale woods or light-toned finishes, where holdover of original appearance is valuable after exposure to normal interior conditions. Because the coating meets Kitchen Cabinet Manufacturer Association (KCMA) Standard, it aligns with performance expectations commonly targeted in kitchen cabinet environments that experience routine use and cleaning. It is also recommended by the Architectural Woodwork Institute (AWI) T.R.2, tying the product to performance criteria used within the architectural millwork field.
The one component, high solids pre-catalyzed design gives finishers a balance of reactive performance and straightforward shop handling, so they work with a single ready-to-use product while still benefiting from pre-cat coating behavior. Fast building characteristics driven by the 17.23% volume solids mean each coat contributes more to final film thickness, which supports consistent protection without long, multi-coat cycles. Very good resistance to moisture, household wear, household chemicals, and marring translates into a finish that better withstands cleaning and everyday contact, which is important when delivering cabinetry and woodwork expected to remain serviceable under typical household conditions. The reduced ambering of the clear resins, when compared to competitors precatalyzed coatings, helps maintain closer alignment between the original finishing sample and the installed product appearance, which matters on projects where color control and specification matching are central to the finished result.
Chemguard II pre-cat clear topcoat is a pre-catalyzed Reactive Amino Coating (RAC), so it behaves as a reactive clear topcoat, supporting higher performance than simple evaporative clear finishes in typical interior wood applications.
The 17.23% volume solids allow each coat to deposit more solids on the surface, so film builds faster, which supports reaching protective thickness with fewer application passes in a finishing schedule.
This one component, high solids pre-catalyzed coating carries its catalyst within the product, so finishers work from a single material while still getting pre-cat performance during application and curing.
KCMA Standard recognition indicates this clear topcoat meets performance criteria associated with kitchen cabinet use, supporting durability expectations in moisture, wear, and household chemical exposure environments.
The very clear resins resist ambering when compared to competitors precatalyzed coatings, so light-colored woods and finishes retain a closer-to-original appearance over time under typical interior conditions.
Chemguard II pre-cat clear topcoat flat gloss, 1 gallon, from Chemcraft offers a one component, high solids, pre-catalyzed RAC system tailored to interior woodwork. Its very good resistance to moisture, household wear, household chemicals, and marring supports demanding cabinet and architectural woodwork projects. Recognition by the Kitchen Cabinet Manufacturer Association (KCMA) Standard and recommendation by Architectural Woodwork Institute (AWI) T.R.2 position this clear topcoat for projects built around established performance benchmarks. For finish rooms needing fast building, low-ambering, flat gloss protection, this Chemguard II system provides a targeted clear topcoat solution.
Sold In: 1 Gallon