Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass Dynapro 2D full-extension undermount drawer slide in the 12 inch length is a concealed roller-bearing slide engineered for drawer boxes with 3/4 inch (19mm) sides. It mounts beneath the drawer box, stays completely out of sight when the drawer is open, and brings the full depth of a small drawer out to the cabinet face.
A 12 inch Dynapro slide suits spice drawers, inner cabinet drawers, bathroom vanity pull-outs, and any shallow drawer box where a longer slide simply will not fit the cabinet depth. At full extension, even a short drawer reveals its entire interior — no reaching past the cabinet face to find what's at the back. This length is the right call when the cabinet interior depth is tight and 15 or 18 inch slides would overshoot the available space.
The Dynapro fits both face-frame and frameless cabinet construction. In a face-frame installation, rear mounting brackets are required to support the back of the slide — those brackets are sold separately and are specific to the Dynapro series, so confirm the bracket SKU before ordering.
This slide is built on a steel chassis with a zinc finish, and it runs on roller bearings — a smooth and reliable bearing type for residential and light-commercial drawer applications. Because Dynapro is an undermount system, the drawer box must be built to the Grass specification: the box width formula, rear notch, and locking-device drilling must all match the slide's requirements before the drawer will seat correctly. This version is sized for 19mm (3/4 inch) drawer sides; the 16mm (5/8 inch) version is a separate product and the two are not interchangeable. Build the box to spec before installation, and the Dynapro locking devices will click the drawer in and release it tool-free.
Cabinet shops building spice drawer banks, bathroom vanities with shallow cabinets, or specialty storage inserts reach for this length when the box depth rules out longer options. Designers specifying Dynapro across a kitchen will often include a 12 inch run for the inner drawers of a blind corner or a narrow filler pull-out. The concealed profile suits modern and transitional door styles equally well, and the full-extension travel means contents are fully accessible regardless of how shallow the run is. Locking devices, rear mounting brackets for face-frame work, and Dynapro-compatible front fixings are all sold as separate Dynapro-series accessories.
Locking devices are sold separately. Dynapro locking devices are series-specific, so order Dynapro-matched front locking clips — other brands' locking devices will not fit this slide.
Yes, but face-frame installations require rear mounting brackets to support the back end of the slide. Those brackets are Dynapro-series-specific and sold separately — plan for them before the job goes to install.
No. This version is engineered for 3/4 inch (19mm) drawer sides. There is a separate Dynapro model for 16mm sides — the two versions are not interchangeable, so match the slide to your box thickness before ordering.
The Dynapro locking devices (sold separately) allow two-directional adjustment of the installed drawer front: height and side-to-side. This makes it straightforward to true the front after the drawer is hung, without removing the box.
Please verify the sold-as unit with the product listing — Dynapro undermount slides are typically sold as a pair, but confirm the quantity shown at checkout before ordering.
When the cabinet is compact but every inch of drawer depth still has to be usable, a full-extension undermount at the correct length and the correct drawer-side thickness is the straightforward answer. Build the box to spec, add the Dynapro locking devices, and the drawer pulls all the way out — clean, concealed, and fully accessible.
Sold In: 5 Set