Berenson Transitional Advantage Three Series 3-3/4" (96 mm) Center to Center Black Pull, - 9359-1055-P
Description
Berenson Transitional Advantage Three Pull For Cabinets
Berenson Transitional Advantage Three pull gives you a 3-3/4 inch (96 mm) center to center cabinet pull that lays out hole spacing cleanly on doors and drawers. The zinc die cast construction creates a solid-feeling handle that supports everyday cabinet use. A matte black finish delivers a dark, uniform look that pairs with many door and drawer fronts. The pull length of 3-11/16 inch keeps the handle compact on smaller cabinet faces while still providing a usable grip area. A projection of 1-3/16 inch stands the pull off the surface enough for fingers to wrap comfortably. The 9/16 inch width keeps the profile slim so the handle does not crowd adjacent hardware. A base diameter of 1/2 inch gives each post a defined footprint that helps visually align multiple pulls in a run.
Key Details That Shape Cabinet Handle Performance
- The 3-3/4 inch (96 mm) center to center drilling lets you plan consistent hole spacing on cabinet doors and drawers, which supports straight, repeatable layouts across a kitchen or shop-built project.
- The overall length of 3-11/16 inch keeps this pull appropriately scaled for many cabinet and vanity fronts, helping maintain balanced proportions between the handle and the face size.
- The 1-3/16 inch projection provides usable clearance from the cabinet surface so fingers can comfortably grasp the pull, which aids everyday opening without knuckles contacting the door or drawer.
- The 9/16 inch width keeps the handle visually light and streamlined, which helps when installing multiple pulls in tight groupings where a bulkier profile could look crowded.
- The 1/2 inch base diameter at each end creates a defined landing area on the cabinet face, which helps the pull seat neatly against the surface for a finished appearance.
- The matte black finish offers a consistent dark tone over the zinc die cast material, which supports projects calling for a modern or contrasting cabinet hardware look.
Mounting Dimensions For Drawer And Door Layout
The 3-3/4 inch (96 mm) center to center drilling dimension on this Berenson 9359-1055-P pull sets the spacing between mounting points for layout on drawers and doors. With an overall length of 3-11/16 inch, the pull slightly overhangs the drilled center lines, which keeps the handle centered while leaving margin from door and drawer edges. A projection of 1-3/16 inch defines how far the handle stands off the face, which affects how deeply your fingers engage behind the pull. The 1/2 inch base diameter at each post determines the contact area against the cabinet front, which helps the pull sit square to the surface once fastened with the 8-32 x 1 inch screws.
Using This Matte Black Pull In Cabinet Projects
Where This Advantage Plus Collection Pull Fits Best
This pull from the Advantage Plus collection is suited to cabinet and furniture applications that match a 3-3/4 inch (96 mm) center to center drilling. The compact 3-11/16 inch length works well on doors and drawers where a shorter handle keeps the hardware visually contained within rail and stile dimensions. The matte black finish pairs with painted or stained fronts that benefit from a contrasting pull, and the 9/16 inch width maintains a narrow visual line that works on both small and medium-size faces. With a 1/2 inch base diameter, each post covers a modest area on the surface, which is useful when aligning multiple pulls along upper cabinets, lower cabinets, or vanity banks.
Details That Support Consistent Cabinet Hardware Results
The 3-3/4 inch (96 mm) center to center measurement gives you a standard drilling pattern to repeat across doors and drawers, which supports jigs and templates for faster shop or onsite layouts. The zinc die cast material provides a uniform casting for each pull, which helps maintain consistent shape and feel from one handle to the next when installed in quantity. A projection of 1-3/16 inch defines clearance behind the pull, so the hand engages comfortably without excessive reach from the cabinet face. The 9/16 inch width and 3-11/16 inch length combine to keep the pull balanced, which helps doors swing and drawers slide using a centered grasp. The 8-32 x 1 inch screw size sets a known thread and length for fastening through typical cabinet fronts, which supports predictable assembly on standard door and drawer thicknesses.
Common Questions About This Berenson Cabinet Pull
What is the drilling size for the Berenson 9359-1055-P pull?
The Berenson Transitional Advantage Three pull uses a 3-3/4 inch (96 mm) center to center drilling, so hole spacing matches that dimension on cabinet doors and drawers.
How long is this matte black Advantage Plus pull overall?
The pull length of 3-11/16 inch sets the overall handle span on the cabinet face, which helps you gauge how it will sit between stiles or within drawer fronts.
What projection does this zinc die cast pull have?
The pull projection is 1-3/16 inch, setting the distance from the cabinet surface to the front of the handle and defining finger clearance during use.
How wide is the Berenson Transitional Advantage Three pull?
The pull width is 9/16 inch, creating a slim profile that affects how the handle looks on smaller doors and closely spaced drawer fronts.
What is the base size where the pull meets the cabinet?
Each base has a 1/2 inch diameter, which defines the footprint on the cabinet surface and helps establish a clean transition from post to door or drawer.
Which screw size works with this Berenson cabinet handle?
This Berenson pull uses 8-32 x 1 inch screws, giving a standard thread and length suited to fastening through typical cabinet door and drawer thicknesses.
Select This Pull For 96 Mm Center Drilling Projects
This Berenson Transitional Advantage Three pull combines a 3-3/4 inch (96 mm) center to center dimension with a compact 3-11/16 inch length, which fits many cabinet and furniture layouts. The matte black finish and slim 9/16 inch width deliver a straightforward, modern look that works across upper cabinets, bases, and vanities. With zinc die cast construction, 1-3/16 inch projection, and 1/2 inch base diameter, the pull provides familiar cabinet-hardware proportions that support consistent results across multi-piece installations. Use this 9359-1055-P pull on projects where a standard 96 mm layout and dark finish align with the overall hardware plan.