Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf tie rack gives you a dedicated pull-out storage option for ties and similar wardrobe accessories in a narrow cabinet or closet opening. The Rev-A-Shelf maple 5W x 13-7/8D tie rack, model CWTTR-14-1, is made of maple and uses ball bearing slides for smooth pull-out access. This pull-out tie rack fits in as little as a 5-1/4 inch opening, which makes it useful where closet organization space is limited. The verified depth for this version is 13-7/8 inches, and the product is part of the wardrobe organization category. Buyers comparing a 5 inch tie rack, rev a shelf storage accessory, or revashelf wardrobe organizer should focus first on opening width, mounting space, and the depth needed inside the cabinet or closet area.
Key specs to confirm: This tie and belt rack is a maple pull-out unit with a 5 inch width and 13-7/8 inch depth. Rev-A-Shelf states that it fits in as little as a 5-1/4 inch opening. Before ordering, confirm the clear opening width, interior depth, mounting surface, and whether surrounding hardware or door swing will interfere with pull-out travel. The web description also notes that this series is available in 12 inch, 14 inch, 16 inch, and 20 inch depths and in black, white, and natural finishes, so buyers should verify they are selecting the correct version for the opening. Load details, compliance information, and any installation hardware specifics should be confirmed with the manufacturer or technical documentation.
What's included: The verified listing identifies a Rev-A-Shelf maple pull-out tie rack with ball bearing slides. Included mounting hardware and accessory count are not specified in the verified product data and should be confirmed before purchase.
What to verify before ordering: Check the cabinet or closet opening width, usable interior depth, mounting orientation, clearance for slide movement, and whether you need the maple finish shown here or another finish from the series. Confirm all included components if your installation schedule depends on hardware arriving in the box.
A wardrobe tie rack is usually chosen when loose accessories are taking up shelf space, getting buried in drawers, or hanging in a way that makes selection slow. This Rev-A-Shelf tie rack is built for that narrow-access problem. The 5 inch width and minimum 5-1/4 inch opening requirement make it relevant for slim closet compartments, vertical partitions, or wardrobe sections where a wider organizer will not fit.
For a homeowner updating closet organization, the practical value is straightforward: ties can be stored on a dedicated pull-out rack instead of stacking them on shelves or mixing them with socks, belts, or other accessories. For an installer, the product is easier to evaluate because several core facts are verified up front: maple construction, ball bearing slides, and a 13-7/8 inch depth for this specific model. Those details help narrow down whether this pull-out tie rack matches the available interior space and the desired finish direction.
This product also makes sense in projects where coordinated wood accessories matter. A maple tie rack can blend more naturally with wood closet components than a painted or wire organizer, but buyers should still confirm the exact finish expectation because the series is offered in black, white, and natural according to the product description. If the project calls for a very shallow compartment, this exact depth may not fit, so checking the cabinet interior is important before ordering.
Buyers searching for a tie and belt rack often want to know whether the product is only for ties. The verified data classifies it as a tie and belt rack, but the exact hook or holder layout is not described in the provided data. If your use includes belts, scarves, or other accessories, confirm the holder configuration in technical documentation before purchase. That step avoids ordering a rack that fits the opening but does not match the accessory type you plan to store.
For remodel work, another common issue is interference. A pull-out tie rack needs enough clearance to extend and enough stable mounting area to support the slides. The ball bearing slides are a useful verified detail because they indicate guided pull-out movement, but the listing does not provide travel distance, load rating, or mounting instructions. Those should be checked if the installation is part of a tight custom build.
When buyers compare tie and belt rack options, the most useful differences are usually material, slide type, size, and opening requirement. This Rev-A-Shelf product gives clear verified data in those areas. It is made of maple, it uses ball bearing slides, and it is sized at 5 inches wide by 13-7/8 inches deep. It also fits in as little as a 5-1/4 inch opening. Those facts help buyers compare products on fit and construction rather than relying on vague descriptions.
A generic rack may not clearly state the opening needed or whether the movement is guided by slides. Here, the ball bearing slide detail helps indicate a pull-out mechanism intended for repeated use. The narrow width is another practical comparison point because not every wardrobe tie rack is designed for slim spaces. If your project has a narrow partition or filler-style opening, that dimension matters more than broad style claims.
The Rev-A-Shelf brand is also useful from a consistency standpoint because buyers often prefer to source wardrobe organization hardware from a known manufacturer when matching accessories across a project. That does not replace the need to confirm exact fit. You should still verify depth, finish, and included components, especially if you are coordinating multiple organizers in one closet build.
For buyers deciding between several pull-out tie rack styles, this model stands out mainly through its verified dimensions and maple construction. If another rack does not list opening requirements, slide type, or depth clearly, it may be harder to specify. If your job depends on exact dimensions, this product gives enough verified information to begin planning, while reminding you to confirm any unlisted installation and capacity details before final purchase.
The Rev-A-Shelf tie rack fits in as little as a 5-1/4 inch opening according to the verified product description.
This maple tie rack has a verified depth of 13-7/8 inches, so the cabinet or closet interior must support that depth.
This pull-out tie rack uses ball bearing slides for guided access inside a wardrobe or closet opening.
This wardrobe tie rack can fit many closet sections if the opening is at least 5-1/4 inches wide and the depth is sufficient.
The verified listing identifies the rack and ball bearing slides, but included hardware is not specified and should be confirmed before ordering.
The Rev-A-Shelf tie rack is made of maple based on the verified product data.
This product line is described as available in 12 inch, 14 inch, 16 inch, and 20 inch depths, so confirm the exact version you need.
This product is classified as a tie and belt rack, but the exact holder layout should be confirmed in manufacturer documentation.
This 5 inch tie rack should be checked for opening width, interior depth, mounting surface, and pull-out clearance. Follow manufacturer installation guidance and local building requirements where applicable.
Maple tie rack selection is easiest when you confirm the opening width, interior depth, and slide clearance before purchase. This Rev-A-Shelf pull-out model is verified as 5 inches wide, 13-7/8 inches deep, made of maple, and designed to fit in as little as a 5-1/4 inch opening. The listing confirms ball bearing slides, but buyers should still verify included hardware, holder layout, and any project-specific installation details so the rack matches both the space and the accessories being stored.
Sold In: 1 Each
