Slide Series Hooks 1" Hook is a decorative hook from R. Christensen by Berenson that provides a compact hanging point in a brushed nickel finish, which gives projects a clean metal look suited to modern cabinet and wall hardware layouts. The hook has an overall length of 2-1/8 inches, so it extends far enough from the surface to hold items while staying tight to the wall or panel for a neat profile in tight spaces. Its overall height of 1-3/16 inches keeps the hook low-profile on vertical surfaces, which helps maintain smooth sightlines across cabinet ends or closet panels. An overall width of 1 inch concentrates the bearing area, allowing installers to place multiple hooks on narrow rails or stiles where space between centers matters. The hook uses an M4 tap, which ties directly into common metric fastener setups used throughout decorative hardware jobs.
This Slide Series decorative hook uses a hidden mounting plate, so the structural attachment sits behind the visible hook body, allowing installers to secure it to the wall or panel while leaving no exposed screw heads on the finished surface. The hook body then covers the mounting plate, presenting a continuous brushed nickel face that blends with other decorative hardware in the room. With its M4 tap, the connection between the hook and mounting plate relies on a metric threaded interface, which aligns with standard decorative hardware practices and helps maintain a consistent fastening approach across similar fittings. Because the hook measures 2-1/8 inches in overall length, fit planning around door travel, trim, or adjacent components can be done using that projection figure, supporting precise spacing during layout.
The Slide Series Hooks 1" Hook fits decorative hardware layouts that call for a compact 2-1/8 inch long hanging point, making it suited to wall panels, cabinet sides, or closet systems where projection is controlled. Its 1-3/16 inch overall height lets the hook sit modestly within vertical fields such as end panels or narrow gables, so it blends with surrounding trim rather than dominating the surface. A 1 inch overall width lets installers align several hooks on closet rails, mudroom boards, or shop panels without overcrowding, which is helpful when spacing multiple hanging points at regular intervals. The brushed nickel finish ties this hook directly to brushed nickel decorative hardware programs, so it visually coordinates with pulls and knobs from the same finish family on a project. With a hidden mounting plate, this hook suits applications where the visible face must stay clean and uninterrupted by fastener heads across living spaces or office installations.
The M4 tap on this Slide Series wall hook connects the hook body to its mounting method using a precise metric thread, supporting repeatable torque and seating feel across multiple installs in a run of hooks. Because the overall length is fixed at 2-1/8 inches, layout work can rely on that projection to align hooks under shelves, near jambs, or beside cabinets without trial-and-error adjustments. The overall height of 1-3/16 inches and width of 1 inch give installers predictable bounding dimensions, which helps when marking hole locations on narrow rails or aligning centers with other decorative hardware elements. The brushed nickel finish provides a uniform surface over the visible parts of the hook, so when several of these hooks are installed in a row, they present a consistent appearance across the entire installation. The hidden mounting plate design keeps all structural connections behind the hook body, which results in a finished look that reads as a single decorative element rather than a hardware stack.
The Slide Series hook has an overall length of 2-1/8 inches, an overall height of 1-3/16 inches, and an overall width of 1 inch, giving installers clear reference points for layout and clearance.
The Slide Series hook uses a hidden mounting plate, so the fasteners sit behind the hook body, leaving only the brushed nickel surface visible for a clean decorative presentation on the wall or panel.
The Slide Series hook uses an M4 tap, which connects the hook through a metric threaded interface and supports consistent fastening with other M4-based decorative hardware components.
The Slide Series hook length of 2-1/8 inches defines its projection from the mounting surface, helping plan placements near doors, trim, or adjacent fixtures with known clearance.
The Slide Series hook width of 1 inch keeps the footprint compact, which supports installing multiple hooks on narrow rails, stiles, or wall strips where horizontal space is limited.
The Slide Series hook brushed nickel finish matches brushed nickel decorative hardware lines, so it visually coordinates with pulls and knobs on the same project for a unified look.
The Slide Series Hooks 1" Hook, in a brushed nickel finish, combines a 2-1/8 inch length, 1-3/16 inch height, and 1 inch width with a hidden mounting plate and M4 tap, giving installers defined dimensions and a concealed attachment method for decorative hardware work. On projects using R. Christensen by Berenson components, these measurements and finish details help align this hook with surrounding hardware layouts, so hanging points fall where planned and appearances stay consistent. For cabinetry, wall systems, or closet applications matching brushed nickel hardware programs, this Slide Series hook provides a compact, clearly specified option ready to integrate into the overall design.