Slide Series Hooks 1" Hook, Dull Chrome Finish

Slide Series Hooks Dull Chrome For Storage

Slide Series hooks dull chrome gives you a compact hanging point with a finish that matches other dull chrome decorative hardware on the job. The R. Christensen by Berenson slide hook belongs to the Decorative Hooks product class, so it works naturally alongside other decorative hardware and moldings in finished spaces. An overall length of 2-1/8 inches provides enough projection for hanging items while staying tight to the wall, which helps on closet walls, cabinet ends, or panels where depth is limited. The overall width of 1 inch keeps the footprint narrow, which is useful when you want multiple hooks in a short run. An overall height of 1-3/16 inches keeps the hook profile modest, so it sits low on vertical panels and blends into tight layouts without crowding other hardware.

Key Hook Details That Support Your Layout

• The overall length of 2-1/8 inches sets how far this hook projects from the surface, which helps you plan clearances near doors, trim, or adjacent cabinetry where overhang needs to stay controlled.
• The overall width of 1 inch defines the space each hook occupies on the mounting surface, so you can lay out rows on closet cleats, locker panels, or cabinet ends with consistent spacing.
• The overall height of 1-3/16 inches keeps the visible profile compact on finished panels, which matters when you are lining up hooks under shelves or along rails where vertical space is tight.
• The M4 tap in the hook body provides a threaded interface, giving you a consistent fastener spec that matches M4 hardware wherever metric threaded hooks are preferred.
• The dull chrome finish ties this hook to other dull chrome decorative hardware, which helps maintain a consistent look across closets, cabinetry, or panel installations using similar finishes.
• The hidden mounting plate keeps fasteners out of sight, which maintains a clean appearance on exposed panels where visible screw heads would distract from finished millwork.

Installation Details For This Slide Series Hook

The slide hook uses a hidden mounting plate, so the plate carries the load while the visible hook slides or locks onto it, giving you a neat face with no exposed fasteners on the front. The M4 tap in the hook body means the connection point is threaded to accept appropriately sized M4 screws, allowing the hook to engage the mounting plate using a single metric thread standard on each installation. With an overall length of 2-1/8 inches, the hook projection is known as you lay out hooks behind doors or near adjacent cabinets, helping you position them where they clear nearby faces. The overall width of 1 inch and overall height of 1-3/16 inches define a compact mounting zone, which is useful when you are aligning multiple hooks on narrow stiles, rails, or returns.

Using This Decorative Hook In Woodworking Projects

Where This Dull Chrome Slide Hook Fits Best

The Slide Series hooks dull chrome design works well anywhere you are finishing woodworking or cabinet projects that already specify dull chrome decorative hardware and moldings, because it keeps the finish consistent across all visible components. As a decorative hook in the Decorative Hardware & Moldings category, it fits naturally on closet panels, cabinet sides, or utility panels where you want a finished look instead of a purely utilitarian part. The 2-1/8 inch overall length gives you enough reach to hang items on closet or mudroom panels without the hook sticking excessively into the room, which suits narrow hallways or tight built-ins. With a 1 inch overall width, the hook can be lined up in multiples on narrow rails or cleats, letting you create dense storage runs along small wall sections. The 1-3/16 inch overall height keeps each hook low profile, which is helpful under shelves or in stacked rows where vertical clearance is limited, keeping everything aligned visually across the installation.

Details That Support Clean, Repeatable Hook Installations

The hidden mounting plate concentrates the structural mounting on a plate that sits behind the hook, so once the plate is located on the panel, you can position additional hooks using the same reference points for a consistent layout. Because the hook uses an M4 tap, every hook in the run shares the same threaded connection size, simplifying your fastener planning when you are installing multiple hooks in commercial millwork or residential closets. The defined overall length of 2-1/8 inches lets you repeat hook placement across projects with predictable projection from the surface, which is useful when hooks are aligned under shelving or near door swings where clearances must stay uniform. The 1 inch overall width and 1-3/16 inch overall height create a known rectangular footprint, which helps when you are routing, drilling, or marking patterns on panels for multiple hooks in a row. The dull chrome finish matches other dull chrome decorative elements, so you can repeat this hook throughout a project and maintain a unified appearance without mixing finishes on visible hardware.

Common Questions About This Slide Series Hook

Choose This Hook For Coordinated Installations

The Slide Series hooks dull chrome design from R. Christensen by Berenson combines a defined 2-1/8 inch overall length, compact 1 inch width, and 1-3/16 inch height with a hidden mounting plate and M4 tap, giving you predictable dimensions and a clean look across cabinetry and woodworking projects.