Slide Series Hooks 2 Inch Hook For Storage

Slide Series Hooks 2 inch Hook gives you a compact hanging point that ties in cleanly with other decorative hardware runs, so projects finish with a consistent look. The brushed nickel finish establishes a neutral metallic tone that coordinates with many modern cabinet and closet layouts, helping installers match existing pulls and knobs from the same space. With an overall length of 2-1/8 inches, this hook projects far enough from the mounting surface to hold everyday items while keeping the footprint tight on narrow stiles or closet panels. The 2 inch overall width spreads the load across a slightly wider base, which supports stable mounting on wood substrates. Overall height of 1-7/16 inches keeps the profile low, which helps when hooks line up behind doors or along the sides of cabinets where clearance is limited.

Key Hook Details That Support Daily Use

• The overall length of 2-1/8 inches sets a defined projection from the wall or panel, helping installers plan spacing for rows of hooks without crowding adjacent hardware or trim pieces.
• The 2 inch overall width gives a balanced mounting footprint, which helps distribute stress across the fastened area when the hook carries coats, bags, or shop gear on finished wood panels.
• An overall height of 1-7/16 inches keeps the hook compact in vertical dimension, which is helpful along cabinet sides, closet cleats, or under-shelf runs where taller hardware might interfere with doors or shelving.
• The brushed nickel finish provides a consistent appearance across the visible surfaces, supporting design coordination with brushed nickel pulls and knobs used elsewhere in the same woodworking project.
• The M4 tap detail defines the fastener interface in the hook body, giving installers a known thread standard when selecting matching machine screws for mounting into the hidden plate.
• The hidden mounting plate design allows the structural fastening components to sit behind the hook, so finished jobs show a clean face while still benefiting from a secure mechanical attachment.

Mounting And Fit Details For This Hook

This R. Christensen by Berenson hook uses a hidden mounting plate, so the structural fastening occurs behind the visible body and leaves the brushed nickel finish unobstructed on the front. That concealed approach gives a cleaner visual line on cabinet ends, closet partitions, or wall panels where exposed hardware heads would interrupt the decorative layout. The M4 tap in the hook body establishes the thread standard at the connection point, which guides installers toward matching M4 machine fasteners for consistent engagement with the plate. With an overall length of 2-1/8 inches and a 2 inch width, the hook size works well on common cabinet panels and cleats because it fits comfortably within typical rail and stile dimensions. The 1-7/16 inch height helps the hook sit neatly under shelves or along vertical runs without extending into door swing paths.

Using This Brushed Nickel Hook In Projects

Where This Decorative Hook Works Best

This decorative hook is classified under decorative hardware and moldings, which aligns it with finished woodworking applications such as cabinets, closets, and similar interior build-outs. The compact 2-1/8 inch overall length means it suits narrow cabinet ends or closet side panels where deeper hooks could conflict with door movement or adjacent fixtures. An overall width of 2 inches positions the hook comfortably on standard face-frame rails or frameless cabinet sides, allowing centered placement that looks intentional within the surrounding hardware layout. The 1-7/16 inch overall height keeps the hook from dominating smaller panel areas, which is useful when multiple hooks are installed in a vertical stack for layered storage. The brushed nickel finish ties the hook into contemporary and transitional hardware schemes, so it can be used alongside matching knobs and pulls from the same space to maintain a unified appearance across the project.

Details That Support Consistent, Repeatable Results

The M4 tap defined in the hook body provides a specific thread size for the connection to the mounting plate, which simplifies repeatable installs across multiple units because the same thread standard carries from hook to hook. The hidden mounting plate keeps the structural connection behind the hook, so visual alignment work focuses on the outer body line rather than exposed fastener heads, which can streamline layout on door ends or panel runs. Dimensions listed as 2-1/8 inch length, 2 inch width, and 1-7/16 inch height give installers reliable reference points when laying out rows or grids of hooks, helping maintain even spacing across wardrobe, mudroom, or cabinet projects. Being part of the Slide Series Hooks family from R. Christensen by Berenson helps designers and shops coordinate hooks with other decorative hardware options from the same brand line, which can reduce variation in finish tone and styling within a job. The brushed nickel finish also supports repeatable visual results because it offers a consistent tone that integrates with many existing brushed nickel fixtures in residential or commercial interiors.

Common Questions About This Slide Series Hook

Select This Hook For Coordinated Installations

This Slide Series Hooks 2 inch Hook in brushed nickel finish offers defined dimensions and a hidden mounting plate, giving installers predictable sizing and a clean front appearance. The M4 tap in the body sets a clear interface for the fastening connection, which supports consistent work across multiple hooks on the same job. With its 2-1/8 inch length, 2 inch width, and 1-7/16 inch height, the hook suits cabinet panels, closet partitions, and other interior wood surfaces where decorative hooks are needed. For projects calling for a compact, brushed nickel decorative hook backed by a defined mounting approach, this R. Christensen by Berenson model aligns well with professional woodworking workflows.