Berenson Wave Series Brushed Nickel 3-1/8" (80 mm) L x 3-1/8" (79 mm) W Knob, - 9315-1BPN-C

Berenson Wave Series Knob For Cabinets

Berenson Wave Series knob gives cabinets a defined pull point with a wide grip surface, using a 3-1/8 inch length to spread hand contact across the front. The zinc die cast construction forms a solid, consistent body, which supports repeatable performance across multiple doors or drawers on the same job. A brushed nickel finish covers the knob, softening reflections on cabinet faces and helping visual alignment across runs of fronts. The square base measures 11/16 inch across, concentrating load where the knob meets the door for a stable feel under hand. Projection of 1-1/8 inch sets the knob out from the face, creating finger clearance while keeping it close enough to avoid catching on clothing in tight paths. Width matches the 3-1/8 inch length, giving the Wave Series knob a balanced, square-on look on the installation surface.

Key Berenson Wave Series Knob Details

• The knob length of 3-1/8 inch spreads the gripping area, which helps users pull heavier drawers or larger doors with less concentrated pressure on a single point.
• The 3-1/8 inch width matches the length, creating a square overall profile that helps align the knob visually on both horizontal and vertical cabinet layouts.
• The 11/16 inch square base focuses contact at the mounting point, which supports stable operation when doors are opened and closed repeatedly in busy spaces.
• The 1-1/8 inch projection spaces the gripping surface away from the cabinet face, giving room for fingers to wrap behind the knob while still keeping the pull close to the front.
• The brushed nickel finish presents a muted metallic surface, which reduces harsh glare and helps the knob blend with other brushed nickel decorative hardware in a project.
• The zinc die cast material forms a precise knob body, supporting consistent sizing and shape across multiple units when repeating this hardware through a full kitchen or shop run.

Cabinet Knob Fit, Size, And Projection Use

This Berenson Wave Series knob uses a length or diameter of 3-1/8 inch, giving it enough span to sit comfortably on wider rails and stiles without looking undersized. With a width of 3-1/8 inch, the knob maintains a square footprint, which supports neat alignment on both vertical doors and horizontal drawers. The 1-1/8 inch projection sets how far the knob stands off the cabinet face, controlling both clearance for fingers and how far the hardware extends into walkways. An 11/16 inch square base provides a compact contact area against the surface, helping the knob seat cleanly on standard cabinet door thicknesses while keeping the footprint visually tight. The brushed nickel finish across these dimensions ties the visible parts together, so the knob reads as one continuous piece on the cabinet front.

How This Berenson Knob Works On Projects

Wave Series Knob Placement On Cabinet Fronts

The Berenson Wave Series knob is part of the Wave collection, which defines its visual style when placed on cabinet doors and drawers. With a 3-1/8 inch length and matching width, the knob presents a substantial square profile on the face of a cabinet, which helps it stand out on larger fronts while still working on narrower doors. The 11/16 inch square base establishes the contact patch against the surface, giving a defined transition between the cabinet finish and the knob body. This compact base size fits comfortably on standard frame rails and panel sections, keeping the mounting area contained without overlapping neighboring details. Because the projection is 1-1/8 inch, the working surface of the knob sits far enough from the cabinet face for fingers to hook behind it, which is useful on deeper drawer boxes where a strong pull is needed. The zinc die cast construction supports this use by producing a uniform, molded form that works consistently across doors in a run.

Details That Support Repeatable Cabinet Hardware Results

The Wave Series zinc die cast material allows the 3-1/8 inch knob to be produced with consistent dimensions, which supports repeatable layout when multiple knobs are installed in a straight line across upper or base cabinets. Matching 3-1/8 inch length and width mean the knob aligns symmetrically around the mounting point, which simplifies centering on drawer fronts and door rails. The 11/16 inch square base defines a clear footprint for layout marks, which supports accurate placement from edge measurements on stiles and rails. A 1-1/8 inch projection keeps the working grip offset predictable from the cabinet face, which is useful when coordinating with adjacent pulls or knobs that share sightlines. The brushed nickel finish across the zinc die cast body stays visually consistent along edges and faces, which supports a uniform appearance when repeating this hardware throughout a kitchen, bath, or shop installation.

Common Questions About This Berenson Wave Knob

Select This Wave Series Knob For Cabinet Projects

The Berenson Wave Series knob in brushed nickel combines a 3-1/8 inch length and width with an 11/16 inch square base, giving cabinets a clear, square pull point that reads consistently across doors and drawers. Its 1-1/8 inch projection sets a practical working distance from the cabinet face, supporting comfortable hand clearance during everyday use. The zinc die cast construction and brushed nickel finish tie these dimensions together into a single decorative hardware piece that coordinates with similar finishes on the job. For cabinet projects calling for a square-profile knob with defined measurements and a brushed nickel look, this Berenson Wave Series model 9315-1BPN-C provides a clearly specified option ready to integrate into layout plans.