Berenson Wave Series Polished Chrome 3-1/8" (80 mm) L x 3-1/8" (79 mm) W Knob, - 9316-1026-C
Description
Berenson Wave Series Knob For Cabinet Projects
Berenson Wave Series knob gives cabinets a polished chrome touch using a zinc die cast construction, so the pull point feels solid while matching other bright chrome hardware in the project. The 3-1/8 inch length provides a wider grasping surface, which helps when pulling larger cabinet doors or heavier drawers. Matching 3-1/8 inch width creates a square footprint, so the knob visually aligns in both directions on doors or drawer fronts. The square base diameter of 11/16 inch concentrates the contact at the mounting point, which helps define a clear layout mark when drilling through finished fronts. A 1-1/8 inch projection sets the hand clearance off the face of the cabinet, so fingers can hook behind the knob without rubbing the door surface during use.
Key Wave Collection Details That Support Use
- The Wave Collection design provides a consistent style reference, which matters when coordinating multiple knobs across a full kitchen or bank of cabinets.
- Zinc die cast material creates a rigid knob body, which helps the hardware feel stable at the mounting point during repeated pulling.
- Polished chrome finish reflects light cleanly, which supports a uniform appearance alongside other polished chrome hinges or pulls.
- The 3-1/8 inch length or diameter defines a larger contact area, which can help users gain better leverage on wider drawer fronts.
- The 11/16 inch square base focuses the load around the fastener area, which supports a crisp seating line against finished cabinet faces.
Mounting Dimensions That Guide Cabinet Installation
The 3-1/8 inch overall width sets a clear planning dimension, which helps installers center the Berenson Wave Series knob on typical drawer widths or door rails. Projection of 1-1/8 inch defines how far the knob stands off the surface, which guides layout when cabinets are close to walls or adjacent doors. The 11/16 inch square base diameter identifies the bearing surface against the wood, which is useful when deciding on door thickness and backing strength. A 45mm screw size is specified, which matches common cabinet door and drawer front thicknesses in many woodworking setups and supports straightforward drilling depth decisions.
Using This Wave Knob In Cabinet Workflows
Where The 3-1/8 Inch Wave Knob Fits Best
The Berenson Wave Series knob, built around a 3-1/8 inch square footprint, suits cabinet doors and drawers where a noticeable handhold is preferred. The equal length and width simplify layout on square or rectangular fronts, because the knob centers the same visually in either direction. With its 1-1/8 inch projection, the knob stands far enough from the surface to clear typical cabinet edge details, which matters when doors have profiles or applied moldings. The polished chrome finish ties into contemporary or transitional cabinet styles, supporting use in kitchens, baths, or shop cabinetry that uses bright metal hardware. Zinc die cast construction supports everyday cabinet use in woodworking environments supplied by Wurth Baer Supply.
Details That Support Repeatable Mounting Results
The square base diameter of 11/16 inch gives installers a defined footprint, which helps align the Berenson Wave Series knob square to door edges for a consistent look across multiple fronts. Because the knob length is also 3-1/8 inch, its edges can be visually lined with panel features or rails, which can speed repetitive installations on a run of doors. The 45mm screw size specification provides a known fastener length reference, which streamlines bit depth and pilot hole planning in standard cabinet stock. Projection at 1-1/8 inch establishes a predictable stand-off distance, which helps prevent knuckles from contacting the cabinet face during repeated use. Combined, these details allow the Wave Collection knob to be integrated into measured cabinet layouts with repeatable alignment.
Common Questions About This Wave Series Knob
What are the main dimensions of this Berenson Wave knob?
The knob has a 3-1/8 inch length, 3-1/8 inch width, 11/16 inch square base diameter, and 1-1/8 inch projection, which together define its footprint and hand clearance on cabinet fronts.
What material is the Berenson Wave Series knob made from?
The Berenson Wave Series knob is zinc die cast, so the body is formed from cast zinc, providing a solid feel at the pull point on doors and drawers.
How does the polished chrome finish affect cabinet appearance?
The polished chrome finish gives a bright, reflective surface that coordinates with other polished chrome cabinet hardware, helping maintain a consistent metal look across the project.
What does the 45mm screw size mean for installation?
The 45mm screw size identifies the fastener length used with the knob, which aligns with many typical cabinet door and drawer front thicknesses in woodworking applications.
How does the 1-1/8 inch projection affect hand clearance?
The 1-1/8 inch projection sets the knob out from the cabinet face, giving fingers space to grip behind the knob without rubbing against the door or drawer front.
What role does the 11/16 inch square base play on the door surface?
The 11/16 inch square base defines the contact patch where the knob meets the cabinet, helping seat the hardware cleanly against finished fronts.
Select This Wave Knob For Measured Cabinet Layouts
The Berenson Wave Series knob combines a 3-1/8 inch square footprint, 1-1/8 inch projection, and 11/16 inch base into a hardware option that suits planned cabinet layouts. When a polished chrome finish and zinc die cast construction are required to match project specs, this Wave Collection knob from Wurth Baer Supply provides defined mounting dimensions for consistent cabinet installations.