Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Wave Series knob is a zinc die cast cabinet knob designed for decorative use on doors and drawers where a wider grip surface is preferred. The 3-1/8 inch length pairs with a matching 3-1/8 inch width to create a square pull area that helps hands center naturally on the knob. The dull chrome finish provides a muted metallic look that suits jobs where a bright polished surface is not desired. A projection of 1-1/8 inch sets the knob out from the cabinet face, giving clearance for fingers while keeping the profile compact. The 11/16 inch square base concentrates the mounting area, which helps installers register the knob consistently against cabinet faces. This combination of size, projection, and finish supports both functional gripping and coordinated appearance across multiple fronts.
This Berenson Corporation knob mounts through the cabinet front using its 45 mm screw size to engage the internal threads. The square base at 11/16 inch sets a defined edge for aligning the knob to layout lines or jig stops. Its 3-1/8 inch length and width give a clear reference for centering on wider rails or drawer faces. The 1-1/8 inch projection keeps the working grip out from the surface enough for comfortable hand clearance during repeated use. Together, these dimensions let installers set up drilling patterns and templates that match the knob geometry, supporting consistent alignment across multiple cabinets and faces on a job.
This Wave Series knob from Berenson Corporation belongs to the Decorative Hardware & Moldings category in the knobs class, positioning it for cabinet, furniture, and millwork fronts that call for visible hardware. The 3-1/8 inch square profile suits wider drawer fronts or doors where a small round knob might look undersized, keeping the hardware proportional to the face. Its dull chrome finish works on projects that use cooler-toned laminates, painted finishes, or complementary metal components, tying the hardware into the broader design. Because the base measures 11/16 inch square, the knob occupies a focused contact area on stile, rail, or panel sections, which is useful when working within narrow frame members or inset panels that limit available mounting area.
The zinc die cast material supports use on interior woodworking jobs such as kitchen cabinets, bath vanities, built-ins, and casework, where repeated hand contact is expected. The 3-1/8 inch length or diameter dimension matches the width, providing a symmetric feel whether the knob is mounted vertically or on horizontal drawer rails. In banks of drawers, this consistent square shape produces an even visual rhythm across the run. On tall doors, the larger grip area allows users to apply pulling force without concentrating pressure on a very small point, which can be helpful on doors with stronger closing action.
The defined 3-1/8 inch by 3-1/8 inch size gives installers fixed reference numbers for jigs and drilling templates, which supports consistent knob placement from cabinet to cabinet. The 1-1/8 inch projection sets a predictable standoff distance, so clearance can be planned around adjacent walls, trim, or neighboring doors without trial-and-error fitting. The 11/16 inch square base diameter creates a smaller registration area than the full knob face, concentrating contact right at the mounting point and helping the knob seat squarely when tightened.
The dull chrome finish offers a stable, uniform surface across all knobs in the Wave Collection, so multiple units present the same sheen level under site lighting. Zinc die cast construction helps each knob match the next in shape, which is important when installing long runs of hardware where small variations become noticeable. The manufacturer part number 9317-10DC-C identifies this exact combination of Wave profile, dull chrome finish, and 3-1/8 inch square size, helping shops specify the same knob again for future phases or replacement work. Within decorative hardware layouts, this precise identity supports consistent results whenever additional fronts are added to an existing installation.
The Berenson Wave Series knob has a 3-1/8 inch length, 3-1/8 inch width, 11/16 inch square base, and 1-1/8 inch projection, giving installers clear numbers for layout, clearance, and visual proportion.
The dull chrome finish on this knob provides a muted metallic look, helping it coordinate with satin or brushed elements when a low-glare decorative hardware surface is desired.
The 9317-10DC-C Wave knob is made from zinc die cast material, giving it a solid feel and consistent molded shape across multiple units on a project.
This Berenson knob has a 1-1/8 inch projection, setting the grip far enough from the cabinet surface for finger clearance while keeping the profile compact.
The 45 mm screw size matches the internal threads of the knob, allowing through-bore mounting on typical cabinet fronts using that length as the fastening standard.
The 11/16 inch square base gives a defined edge against the cabinet front, helping installers align the knob to layout marks or jig stops for repeatable positioning.
The Berenson Wave Series dull chrome knob combines a 3-1/8 inch square profile, 1-1/8 inch projection, and zinc die cast construction to support both grip and appearance on cabinet doors and drawers. Its 11/16 inch square base and 45 mm screw size give clear installation reference points for layout, drilling, and fastening. For projects calling for decorative hardware within the Wave Collection, this 9317-10DC-C knob provides a defined option that can be repeated across existing and future work.
Sold In: 1 Each
