Berenson Wave Series Brushed Nickel 1-15/16" (49 mm) L x 1-15/16" (49 mm) W Knob, - 9318-1BPN-C

Berenson Wave Series Knob For Cabinet Projects

Berenson Wave Series knob gives cabinets a square, modern pull point using a 1-15/16 inch length and width that spreads hand force comfortably across the face of the door or drawer front. The zinc die cast construction delivers a solid metal feel that supports repeated daily use on active cabinet runs. The brushed nickel finish provides a muted metallic look that pairs well with many laminated or painted surfaces in shops and built-ins. With a projection of 1 inch, this knob stands off the face enough for finger clearance while still staying tight to the front, which helps limit snag points on passing clothing. The 11/16 inch square base concentrates contact at the mounting point, which supports stable seating against the cabinet face during fastening. This combination of dimensions, material, and finish suits cabinet, furniture, or millwork applications where a square decorative knob is required.

Key Wave Series Knob Details For Buyers

• The zinc die cast material creates a rigid knob body, which helps the Berenson Wave Series knob resist flexing when doors or drawers are pulled repeatedly in busy environments.
• The brushed nickel finish adds a softer metallic surface, which helps this knob visually coordinate with brushed nickel hinges or other decorative hardware on the same installation.
• The 1-15/16 inch length or diameter sets the overall square face size, giving hands a broad contact area that supports a firm grip on both doors and larger drawer fronts.
• The 1-15/16 inch width matches the length dimension, forming a true square profile that simplifies layout when aligning multiple knobs across cabinet banks.
• The 1 inch projection defines how far the knob stands off the surface, providing finger space for pulling while helping keep fronts looking streamlined on finished cabinetry.
• The 11/16 inch square base diameter specifies the footprint at the mounting point, which helps installers plan hole placement and edge distances on narrow rails or stile members.

Wave Knob Sizing And Mounting Considerations

The 1-15/16 inch square face of this Berenson Wave Series knob gives installers a clear visual reference when centering hardware on doors or drawer fronts. The 1 inch projection sets the standoff from the surface, which helps define backset distance from adjacent doors or vertical frames. With an 11/16 inch square base, the knob seats on a relatively compact footprint, supporting use on narrower rails where edge clearance is limited. The 45mm screw size described for this knob indicates the intended fastener length, which helps align the knob to typical cabinet front thicknesses in woodworking projects. Together, these mounting-related dimensions support predictable drilling layouts and repeatable positioning across multiple cabinet faces.

Where This Berenson Wave Knob Works Best

Square Brushed Nickel Knob For Cabinets

This Berenson Wave Series knob from the Wave collection is built as decorative hardware for cabinets and related woodworking projects. Its zinc die cast construction offers a metal body suitable for doors and drawers that are opened and closed throughout the day. The 1-15/16 inch by 1-15/16 inch square design creates a uniform, geometric look across banks of cabinets, which helps installers maintain consistent sight lines on aligned fronts. The brushed nickel finish ties into other brushed nickel cabinet hardware, allowing this knob to visually integrate with hinges or pulls specified in the same finish family. Because the width and length match, layout across upper and lower runs stays consistent, which simplifies templating when repeating the same center-to-edge measurements on a full kitchen or casework job.

Dimensions That Support Consistent Hardware Layout

The 1 inch projection on the Berenson 9318-1BPN-C knob defines how far it stands off from the cabinet surface, which provides reliable finger clearance while keeping doors and drawer fronts relatively flush in appearance. This projection also helps set expectations for how the knob interacts with adjacent cabinets, reducing interference when doors open near walls or tall stiles. The 11/16 inch square base diameter defines the bearing surface where the knob meets the wood, helping it sit flat against the face during tightening for a stable feel in use. The 45mm screw size listed for this knob aligns with common cabinet front thicknesses, supporting secure thread engagement through typical door and drawer materials. Together, these dimensional details help installers plan drilling, spacing, and repetition across full cabinet layouts with predictable results.

Common Questions About The Berenson Wave Knob

Select This Wave Knob For Square Cabinet Pull Points

The Berenson Wave Series knob combines a 1-15/16 inch square face, 1 inch projection, and 11/16 inch square base to support consistent cabinet layouts. The zinc die cast body and brushed nickel finish provide a metal pull point ready for active doors and drawers. With its specified 45mm screw size and defined dimensions, this knob gives cabinetmakers and installers a clearly documented choice for projects that call for square, brushed nickel decorative hardware.