Berenson Wave Series Polished Chrome 1-15/16" (49 mm) L x 1-15/16" (49 mm) W Knob, - 9319-1026-C

Berenson Wave Series Knob For Cabinet Projects

Berenson Wave Series knob is a square cabinet knob designed for decorative hardware applications where a clean, modern look is needed. The knob is part of the Wave collection from Berenson Corporation, so it ties visually with other Wave series pieces on a job. Its length of 1-15/16 inches and matching 1-15/16 inch width create a square pull point that gives consistent hand contact on cabinet doors or drawers. The knob is made from zinc die cast, which provides a solid metal body for everyday cabinet use. A polished chrome finish on the knob delivers a bright, reflective surface that matches polished chrome hinges or faucets. The square base diameter of 11/16 inch gives a defined footprint on the cabinet face, controlling where the load transfers. A 1 inch projection sets the working stand-off from the cabinet, giving finger clearance without sticking too far into walk paths.

Key Wave Collection Details That Help On Site

• The 1-15/16 inch length or diameter creates a substantial grip area, which helps when operating wider or heavier cabinet doors in kitchens or shops.
• The matching 1-15/16 inch width keeps the knob square, so layout lines stay simple when aligning multiple knobs across doors and drawer fronts.
• The zinc die cast material gives the knob a uniform, stable body, which supports consistent feel across every installed piece on a run of cabinets.
• The polished chrome finish provides a bright metallic surface, which visually coordinates with other polished chrome hardware on the same installation.
• The 11/16 inch square base diameter defines a compact contact patch, which helps when positioning the knob on narrow rails or smaller drawer fronts.
• The 1 inch projection sets a controlled offset from the cabinet face, which balances finger clearance with a low-profile appearance on the finished job.
• The 45mm screw size specification ties the knob to a known fastener length, which matters when working with typical cabinet door and drawer front thicknesses.

Installation Dimensions For Cabinet Layout Work

The knob uses a 45mm screw size, which establishes the fastener length that passes through the cabinet front into the threaded body. Its 1-15/16 inch square footprint simplifies drilling patterns because the knob centers the pull point both vertically and horizontally. The 11/16 inch square base diameter concentrates contact into a smaller area, which is useful when positioning on narrow stile or rail sections. With a 1 inch projection from the cabinet face, the installed knob provides room for fingers to pull while staying close enough to the surface for a tight visual line. The zinc die cast construction and polished chrome finish work together to provide a solid-feeling pull point with a bright, consistent surface across multiple installations.

Where This Berenson Knob Fits Best In Use

Wave Collection Knob For Cabinets And Drawers

This Berenson Wave Series knob is specified as decorative hardware for cabinets and similar casework where a square, modern style is desired. Its 1-15/16 inch by 1-15/16 inch dimensions make it suited to both standard cabinet doors and wider drawer fronts that benefit from a larger pull area. The square base diameter of 11/16 inch lets the knob sit comfortably on common face frame rails or frameless cabinet fronts without visually overcrowding the panel. Because it is part of the Wave collection, this knob can be used wherever a consistent Wave design language is required across a room or project. The polished chrome finish works in spaces where other polished chrome hardware elements are specified, such as faucets or hinges, keeping the visible metal surfaces coordinated from cabinet to cabinet.

Dimensions And Finish That Support Repeatable Layout

The knob's 1 inch projection from the cabinet face sets a repeatable pull distance, which is helpful when laying out rows of knobs across multiple doors and drawers. This consistent stand-off allows installers to maintain the same reach and clearance at every opening, streamlining user experience. The 45mm screw size pairs the knob with a known fastener length, so drilling depth and through-hole planning follow a predictable pattern on typical cabinet thicknesses. A 1-15/16 inch square profile makes it straightforward to center the knob on door stiles or drawer fronts because both axes share the same measurement. The zinc die cast body supports a uniform shape and weight from piece to piece, helping installers achieve a consistent feel when users grip different doors on the same run. The polished chrome finish delivers a reflective surface that maintains a single color tone across multiple knobs, which keeps alignments and sightlines clean when viewed along a bank of cabinets or built-ins.

Common Berenson Wave Series Knob Questions

Choose This Wave Knob For Consistent Cabinet Layout

The Berenson Wave Series knob from Wurth Baer Supply combines a 1-15/16 inch square profile, zinc die cast construction, and polished chrome finish to support coordinated cabinet projects. Its 1 inch projection, 11/16 inch square base, and 45mm screw size give clear dimensions for layout and drilling. For cabinet runs that call for a modern square form factor and consistent Wave collection styling, this knob provides defined measurements that translate directly into predictable installation and a unified finished appearance.