Berenson Wave Series Brushed Nickel 1-1/4" (32 mm) L x 1-1/4" (32 mm) W Knob, - 9321-1BPN-C

Berenson Wave Series Brushed Nickel Knob Use

Berenson Wave Series brushed nickel knob describes a zinc die cast cabinet knob from the Wave collection that provides a consistent look across doors and drawers, which helps maintain a unified appearance on finished cabinetry runs. The 1-1/4 inch length or diameter defines a compact square pull point that gives fingers a clear edge to grab, supporting comfortable everyday operation on smaller and standard cabinet fronts. Matching the 1-1/4 inch width with the same 1-1/4 inch length creates a true square face, which simplifies layout when aligning multiple knobs on double doors or banks of drawers. The brushed nickel finish establishes a muted metallic surface that softens reflections, which can reduce visible fingerprints compared to highly polished finishes in busy kitchen or shop environments.

Key Wave Knob Details That Support Work

• The zinc die cast material provides a solid, uniform knob body that accepts threaded engagement, which supports repeatable tightening to the cabinet front during installation.
• The brushed nickel finish creates a consistent surface tone across the knob, which helps match other brushed nickel decorative hardware on the same project.
• The 1-1/4 inch length or diameter defines the overall face size, which helps installers plan knob placement relative to rail widths and door edges.
• The square base diameter of 7/16 inch sets the footprint against the door or drawer front, which focuses contact to a compact area for a crisp, defined transition.
• The 1 inch projection sets how far the knob extends from the mounting surface, which influences hand clearance and how far hardware stands proud of the cabinet face.
• The 1-1/4 inch width mirrors the stated length, which confirms the square shape and assists with precise visual alignment in grid layouts.

Wave Knob Mounting And Dimensional Fit

The 1 inch projection identifies how far the Wave knob stands off the cabinet surface, which affects how easily fingers can hook behind the knob while still keeping hardware relatively tight to the face for a low-profile look. The square base diameter of 7/16 inch describes the contact pad where the knob meets the door or drawer, which concentrates bearing pressure into a small footprint that reads visually crisp on narrow rails or stile profiles. Matching 1-1/4 inch length with 1-1/4 inch width defines a balanced square plan view, which streamlines measuring and marking center points when repeating the same knob position across multiple fronts.

Applying This Wave Knob On Cabinet Projects

Where This Square Brushed Nickel Knob Works

The Berenson Wave Series brushed nickel knob belongs to the Berenson decorative hardware and moldings knobs category, which positions it for use on cabinet doors and drawers where visual coordination with other knobs from the same product class matters. The Wave collection identity ties this knob to a defined family, which helps designers and installers repeat the same look across kitchens, baths, and built-ins when consistent hardware styling is required. Its 1-1/4 inch square face size fits typical residential cabinet front proportions, which supports use on both wall and base cabinets without overpowering narrow frame members.

The zinc die cast construction gives the knob a dense, molded body, which provides a stable feel at the touch point each time the door or drawer is pulled. The brushed nickel finish presents a soft metallic tone that pairs with many contemporary and transitional cabinet finishes, which can simplify hardware selection when working within mixed-material interiors. The compact 7/16 inch square base keeps the contact area small against painted or stained fronts, which preserves more visible door surface around the knob for a cleaner appearance.

Details That Support Repeatable Cabinet Installations

The defined 1-1/4 inch length or diameter provides a clear reference for drilling layouts, which allows installers to maintain consistent reveals between knob edges and adjacent door or drawer edges on repeating runs. Equal 1-1/4 inch width confirms the knob is square in plan, which makes it straightforward to align parallel to cabinet edges by visually matching sides with rails and stiles during install. The 1 inch projection specifies the stand-off distance from the front, which lets planners coordinate hardware overhang with nearby elements such as door casing or appliance panels.

The 7/16 inch square base gives a precise footprint, which is useful when laying out knobs on narrow drawer fronts where available mounting land is limited. The brushed nickel finish defined in the product data aligns with other brushed nickel decorative hardware, which assists in building a coordinated hardware schedule across a project. The Wave series name and manufacturer part number 9321-1BPN-C identify this exact knob, which supports accurate reordering when matching existing installations on later phases or service work.

Practical Questions About This Berenson Wave Knob

Selecting This Wave Knob For Your Next Run

The Berenson Wave Series brushed nickel knob combines a 1-1/4 inch square face, 1 inch projection, and 7/16 inch square base with zinc die cast construction, which gives installers clear, repeatable dimensions and a defined mounting footprint for cabinet doors and drawers.