Plywood Hardwood Maple, White, Veneer Core, Domestic, ULEF, Whole Piece Face, 1-Sided Satin Gloss 1/4" Thickness, 48.5 x 96.5, Grade C-2

Plywood Hardwood Maple White Veneer Core Panel

Plywood Hardwood Maple White Veneer Core describes this States Industries hardwood plywood panel, which uses a white maple face over a veneer core to give cabinet and millwork projects a familiar plywood structure with a maple appearance that matches domestic work. The 1/4 inch thickness keeps the panel light for backs and skins while still adding a maple surface where a thinner sheet is preferred in cabinet or fixture construction. The 48.5 x 96.5 inch size provides a slightly oversize sheet that helps during cutting layouts when trimming edges to final dimension on site or in the shop. The C-2 grade identifies a workable balance between a usable maple face and a secondary back, which suits interior cabinet components and similar applications where one better face is required. The hardwood plywood product class signals that this panel is intended for woodworking projects rather than structural framing.

Key Maple Plywood Details For Shop Planning

• The 1/4 inch thickness supports use for cabinet backs or light panels where weight needs to stay low, helping large casework stay manageable during handling and assembly.
• The 48.5 x 96.5 inch dimensions give a bit of extra length and width beyond nominal 4x8, allowing edge trimming to remove handling marks and produce clean, square finished parts.
• The veneer core construction provides a traditional plywood core profile that works predictably with common woodworking blades and bits during ripping, crosscutting, and routing.
• The domestic maple, white face matches projects calling for white maple appearance, helping maintain a consistent look across visible cabinet or millwork surfaces in a run of work.
• The C-2 grade description sets expectations for a primary working face and secondary back, guiding where to orient each side in cabinet interiors or non-show surfaces.

Installation And Cutting Use For Maple Panel

The 1/4 inch thickness of this States Industries maple plywood panel suits situations where the sheet will be captured in cabinet dados or frames, because the thinner profile nests efficiently without taking unnecessary depth from interior space. The veneer core reacts in a familiar way when scoring and cutting, which matters during layout where repeatable dimensions across multiple cabinet backs or partitions are important. The 48.5 x 96.5 inch oversize format supports ripping full-length strips for tall cabinets or end panels, leaving material to joint or trim to final size. The white maple face allows installers and shop teams to orient the better side toward the interior or exterior of casework, depending on the job requirements, while the C-2 grade designation provides a practical expectation of the working surfaces.

Using This Domestic Maple Plywood In Practice

Where This Domestic Maple Plywood Fits Best

This States Industries plywood, categorized as Plywood Hardwoods, Domestic and Import, places it in the wood products range used by cabinet and woodworking shops for interior components. The domestic maple, white face helps it fit projects where a light maple appearance is desired across panels such as cabinet sides, backs, or divider panels that coordinate with maple doors or frames. The 1/4 inch thick sheet works well in locations where the panel is supported by a cabinet structure, like backs sitting in grooves or applied skins that do not serve as primary structural members. The C-2 grade makes the sheet appropriate for installations where one face is more visible than the other, guiding layout so the better maple face is placed toward the viewing side of a cabinet or fixture.

Details That Support Repeatable Maple Panel Results

The veneer core construction of this maple plywood supports predictable machining, which benefits shops cutting multiple identical parts for a production run of cabinets. The 48.5 x 96.5 inch size offers extra trimming room, allowing fabricators to cut away factory edges and still net full-size parts, which helps keep seams tight when cabinets are installed side by side. The 1/4 inch thickness keeps panel weight down, easing handling of full sheets on the saw while still offering a suitable substrate for interior paneling where the maple face provides the required appearance. The PF1S 1-sided satin gloss note in the product name indicates that one side carries a satin gloss maple presentation, giving installers a clear choice for orienting the finished face where it will be seen once the cabinet or millwork assembly is in place.

Common Maple Veneer Core Panel Questions

Selecting This Maple Panel For Your Next Job

This States Industries Plywood Hardwood Maple, White, Veneer Core panel gives shops a domestic maple solution with a 1/4 inch thickness, 48.5 x 96.5 inch oversize format, and a C-2 grade satin gloss face. Those combined details support cabinet and woodworking layouts where one good maple face, lighter panel weight, and predictable veneer core machining all matter for on-time fabrication. For projects matching white maple interiors or coordinated casework, this panel aligns panel appearance and sheet size with typical shop workflows. Use this hardwood plywood option when the job calls for a maple-faced, veneer core sheet in the Plywood Hardwoods, Domestic and Import category from Wurth Baer Supply.