Plywood Hardwood Veneer Core For Cabinet Work

Plywood Hardwood Veneer Core from States Industries is a 3/4 inch thick domestic maple panel that provides a stable wood core for casework where a hardwood plywood structure is required. The white maple veneer face presents a light-toned surface that suits projects calling for a clean maple appearance across visible cabinet or furniture faces. The panel size of 48.5 x 96.5 inches gives a full 4 x 8 workpiece with added trim allowance that supports squaring and edge cleanup during layout and cutting. The C-2 grade rating on this panel defines a controlled balance between face quality and cost where a functional, serviceable maple surface is needed on the primary side. The veneer core construction supports traditional plywood machining, so installers can treat it as a typical hardwood panel when cutting, boring, or routing parts.

Key Maple Veneer Panel Details In Practice

• The 3/4 inch thickness establishes a substantial panel cross-section that supports cabinet sides, shelves, or partitions where a hardwood plywood build is specified.
• The domestic maple white face gives the working side of the panel a consistent maple look that supports finishing systems designed around light-colored hardwood surfaces.
• The whole piece face construction delivers a single-piece face veneer that avoids pattern breaks, allowing wide parts to be cut without seams across door or panel fields.
• The 1-sided satin gloss finish on the primary face provides a smooth, prepared surface that can be integrated into projects designed for a sheen-level maple presentation.
• The veneer core plywood build combines hardwood veneers in the core, giving the sheet a familiar weight and handling profile during transport and shop processing.

Maple Plywood Panel Dimensions And Fit

This States Industries maple plywood panel measures 48.5 x 96.5 inches, offering a slightly oversized format that supports trimming edges to establish square, clean reference lines before final ripping or crosscutting. The 3/4 inch thickness aligns with common cabinet and furniture construction dimensions, so it matches standard design assumptions for panel-based assemblies and joinery layouts. The single-faced configuration, with the primary white maple satin gloss surface on one side, guides orientation during cutting so visible components can be mapped to the finished face while interior parts can draw from the reverse side.

Using This Domestic Maple Panel On The Job

Where This White Maple Veneer Core Fits

This plywood hardwood veneer core panel from States Industries is built around domestic maple, positioning it for projects based on North American maple appearances and machining behavior. The white maple whole piece face creates a broad, uninterrupted surface that supports large doors, end panels, or furniture sides requiring a continuous field of maple grain. With dimensions of 48.5 x 96.5 inches, the sheet covers standard cabinet runs and tall case sides in a single piece, which supports layout strategies that minimize joints across long spans. The C-2 grade face works for applications where the primary emphasis is on a sound maple surface rather than a show-grade classification, aligning with many built-in, fixture, and cabinet interiors that still demand a genuine hardwood face.

Details That Support Repeatable Maple Panel Results

The veneer core construction of this plywood hardwood veneer core panel provides a hardwood-based internal build, which supports consistent cutting and fastening behavior across the sheet during repetitive cabinet part production. The 3/4 inch panel thickness maintains a predictable edge profile for joinery such as dados or rabbets, so tooling setups remain stable from part to part. The one-sided satin gloss white maple face directs workflow, since installers can stage cutting diagrams around the finished side and reserve the reverse for non-view surfaces, helping maintain visual consistency across finished fronts. The overall sheet size of 48.5 x 96.5 inches also supports repeat layouts, giving extra stock at the perimeter so reference edges can be re-established even when multiple rip and crosscut passes are required across a production batch.

Common Questions About This Maple Veneer Panel

Selecting This Maple Plywood For Your Next Build

This Plywood Hardwood Veneer Core panel from States Industries combines domestic white maple, a whole piece face, and a 3/4 inch veneer core build to support cabinet and furniture projects designed around hardwood plywood construction. The 48.5 x 96.5 inch format and 1-sided satin gloss face help align layout and finishing plans with a defined show surface and trim-friendly sheet size. When a C-2 grade white maple face on a veneer core panel fits the project specification, this maple plywood provides a straightforward path from panel breakdown to assembled casework.