Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Veneer Core from States Industries is a 3/4 inch thick, unfinished domestic cherry plywood panel that provides a hardwood cherry face over a veneer core for casework, cabinetry, or millwork projects needing a cherry appearance. The plain sliced cherry face and back create the traditional cathedral and straight-grain look that suits visible cabinet sides, door panels, or furniture components where the grain pattern needs to present as cherry. The A-1 grade rating on this panel sets an appearance and back quality level that supports use in applications where one face is the primary show surface and the reverse still needs a serviceable back. The 48.5 x 96.5 inch panel size gives slightly oversize dimensions that allow trimming edges to square and clean before final sizing, which helps eliminate factory edge handling damage in finished dimensions. The domestic cherry species on this States Industries panel matches projects that call for American cherry color and grain.
This States Industries plywood uses a 3/4 inch thickness, giving the panel the heft commonly expected in cabinet sides, shelves, and structural furniture components where edge profiles or joinery must hold. The 48.5 inch by 96.5 inch overall size offers extra length and width beyond nominal 4 x 8, which leaves room to true edges and cut slightly undersize parts while maintaining clean cherry faces. The panel is supplied unfinished, so the cherry face and back are ready for shop-selected staining, clear coating, or other finishing systems that match existing installations. The A-1 grade, combined with the unfinished cherry surface, supports projects where the installer wants control of color and sheen while starting from a panel built for surface smoothness.
This plywood hardwood veneer core uses domestic cherry for the face and back, aligning with interior woodworking where cherry is specified for its grain pattern and color development. The A-1 grade supports use on visible cabinet ends, door panels, or drawer fronts where the primary face needs a controlled appearance and the back must remain serviceable. The western fir veneer core gives a familiar softwood core structure that matches shop workflows already set up for veneer core sheet processing. The 3/4 inch panel thickness matches common case construction and shelf dimensions, so parts can be laid out from the 48.5 x 96.5 inch sheet for sides, tops, and dividers without shifting to unusual tooling or hardware dimensions.
The two step layup process starts by laminating inner plies onto a blank, then puttying knots or slips on that blank before the cherry face and back are added, which reduces core defects printing through the veneer during sanding and finishing. Sanding the blank before overlay creates a more even substrate, so the final panel thickness remains consistent across its area and supports tighter tolerances when building larger cabinet runs. This construction ensures smoothness of the finished cherry surface, which helps reduce time spent leveling grain and chasing minor irregularities before applying coatings. The same process ensures consistency of the panel thickness, which supports repeatable dado depths, groove settings, and joint fits across multiple sheets from States Industries in a production or multi-room installation.
This panel uses a western fir veneer core built with a two step layup process, giving a softwood-based core that machines predictably for cabinet and millwork components cut from the sheet.
The 3/4 inch thickness provides the standard material thickness used for cabinet cases, shelves, and structural furniture parts, aligning with common joinery details and hardware setups in woodworking shops.
The A-1 grade defines the cherry face and back quality level, supporting use where one surface is a primary show face and the opposite side still needs a consistent, usable back in cabinetry or furniture.
The 48.5 x 96.5 inch size gives slightly oversize length and width, allowing trimming factory edges and still pulling full-size parts, which supports squaring and clean edge presentation on finished components.
The panel is unfinished cherry so finishing systems can be chosen in the shop, allowing stain or clear coats to be matched to existing work while using the smooth veneer surface created by the two step layup.
The two step layup, with inner plies laminated and sanded before face application, supports consistency of panel thickness, which benefits precise joinery and repetitive machining in cabinet runs.
This States Industries plywood hardwood veneer core panel combines domestic cherry, a two step layup process, western fir veneer core, and A-1 grading to support cabinet and millwork projects needing a smooth cherry surface. The 3/4 inch thickness and 48.5 x 96.5 inch dimensions align with common casework layouts, so parts for sides, shelves, and tops can be patterned efficiently from each sheet. For projects calling for unfinished plain sliced cherry over a controlled veneer core, this panel offers a defined structure and appearance level ready to move directly into your cut and finish sequence.
Sold In: 1 Sheet
