Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Khaya 1/2 x 4 x 8 plywood identifies this sheet as a Khaya hardwood plywood panel in a nominal 1/2 inch thickness and 4 by 8 foot size, giving you a familiar format for cabinet and casework layout. The product is classified as plywood in the Board Panel Products category, so it serves as a structural sheet good rather than solid lumber, which supports efficient cutting patterns for built-ins and furniture components. The A1 designation in the description identifies an A1 grade face and back configuration, which is suited to visible surfaces where a consistently selected Khaya veneer appearance is important. The panel is described as VC, signaling a veneer core construction that behaves like a traditional plywood core during machining and fastening. The NAUF wording in the description identifies a No Added Urea Formaldehyde construction, which matters on projects where specified material standards call for that type of panel.
The product is identified as a plywood panel in the Board Panel Products category, so it is intended to be processed like other hardwood plywood when cutting cabinet parts, casework, and similar components. The 1/2 inch thickness called out in the description provides a panel that can be sized for sides, partitions, and back panels where material thickness affects dado depth and groove settings on table saws and routers. The 4 x 8 format in the product name means layout work can follow standard grid spacing on cut sheets, making it straightforward to translate drawings into rip and crosscut sequences. The veneer core, noted as VC, signals a core that accepts typical woodworking tooling, so settings established for other veneer core hardwood plywood often transfer directly to this Khaya sheet.
The SAP description identifies the product as KHAYA,PS,1/2X4X8,A1,VC NAUF, placing it within hardwood plywood applications where a Khaya face veneer is desired. The A1 notation supports use in visible casework, such as cabinet ends, tall pantry sides, or furniture panels, where both faces may be seen and a selected veneer is beneficial. The 1/2 inch thickness and plywood classification in the Board Panel Products category suit it to cabinet interiors and structural panels that do not require the extra mass of thicker sheets. Because the web description connects this item to States Industries under code VCMPS50048A1VC, shops that specify States Industries panels can align this sheet with existing material standards on Khaya-faced projects.
The product name and web description together spell out 1/2X4X8 and VC NAUF, giving installers and fabricators a clear shorthand for thickness, size, core type, and NAUF status when entering cut lists or material schedules. Using a stated 4 x 8 Khaya veneer core sheet allows you to standardize yield assumptions across drawings, since each panel is expected to present the same nominal dimensions during layout. The A1 designation tied to a Khaya face supports uniform surface preparation, so sanding sequences and finishing passes can be kept consistent from panel to panel on a run. The States Industries identification, VCMPS50048A1VC, links this specific configuration to a known manufacturer line, helping shops reference the same Khaya, PS, A1, VC NAUF build on repeat orders or when adding matching components to existing installations.
The product description identifies the sheet as Khaya, so the face veneer is Khaya hardwood, which guides stain selection and finishing steps on visible cabinet and furniture surfaces.
The name 1/2X4X8 specifies a nominal 1/2 inch thick, 4 foot by 8 foot Khaya plywood sheet, which matches common panel-handling setups and cut-list planning in most woodworking shops.
The description lists VC, indicating a veneer core construction, so it behaves like typical veneer core hardwood plywood during sawing, routing, and edge machining steps.
The A1 reference in the description signifies an A1 face and back grade combination, which suits applications where both faces may remain visible in finished cabinetry or casework projects.
The NAUF term in the product description denotes No Added Urea Formaldehyde, which is relevant on projects that specify that type of plywood construction for their material list.
The web description identifies States Industries and lists code VCMPS50048A1VC, so this Khaya, PS, 1/2X4X8, A1, VC NAUF panel is from the States Industries plywood line.
This Khaya, PS, 1/2X4X8, A1, VC NAUF panel from States Industries provides a Khaya-faced veneer core plywood sheet in a standard 4 by 8 format, so it slots directly into cabinet and casework cut lists where those specs are called out. With its A1 designation and NAUF identification clearly stated in the product and web descriptions, this sheet matches projects that require an A1 Khaya veneer presentation and a No Added Urea Formaldehyde construction. For work that depends on repeatable panel behavior and a defined Khaya appearance across multiple units, this specific VCMPS50048A1VC sheet offers a consistent reference point when planning material for upcoming shop runs.
Sold In: 1 Sheet