Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plywood Hardwood Veneer Core from States Industries is a 1/2 inch thick, unfinished natural domestic maple panel designed as a plywood solution where a maple face is required. The rotary cut maple face and back give the sheet a continuous, uniform grain appearance, which supports visual consistency across doors, end panels, or large surfaces that need a flowing grain look. The panel size of 48.5 x 96.5 inches provides a slightly oversized sheet relative to nominal 4 x 8 dimensions, giving extra trim allowance at the edges so cuts can be cleaned up to final size. The grade B-2 construction means the primary maple face is selected for a better appearance than the back, which suits exposed face applications while reserving the back for interior or secondary surfaces. As a plywood in the Board Panel Products category, it fits naturally into cabinet, fixture, or general woodworking layouts that are planned around panel-based construction.
This States Industries plywood has a 1/2 inch thickness, giving a mid-weight panel that fits designs planned around half-inch case parts or partitions. That thickness supports applications where panels need some rigidity without the bulk of thicker stock. The 48.5 x 96.5 inch sheet size provides extra length and width beyond nominal 4 x 8 layout, so rips and crosscuts can remove factory edges while still yielding full-sized components. The veneer core construction ties the maple faces to a western fir core, so the overall panel behaves as a plywood assembly rather than a composite core in cutting and boring operations. As an unfinished natural maple surface, the sheet is ready for the finisher to apply a system suited to the project, letting the maple color and grain be controlled by the chosen finish schedule.
This plywood hardwood veneer core panel is a domestic maple, natural, rotary, unfinished sheet, so it aligns with work that calls for a real maple face ready for custom finishing. The B-2 grade identifies it as having a better-quality primary face and a secondary back, fitting projects where one side is the presentation surface and the other faces the interior of a cabinet or structure. Because the maple is rotary cut, the grain runs in a broad, continuous pattern across the sheet, supporting layouts where wide components, doors, or end panels benefit from a flowing grain rather than narrow leaves. The western fir veneer core underneath the maple faces works as a structural base, integrating into assemblies built from other veneer core products within the shop so machining behavior remains familiar. As part of the plywood class, it slots into cut-to-size workflows that depend on predictable panel stock.
The two step layup process, where inner plies are laminated to a blank and then sanded before the face and back veneers are applied, creates a panel structure aimed at consistent machining. Because surface knots or slips in the inner plies are puttied before the veneers are overlaid, the core under the maple faces is more uniform, which supports sanding and finishing without unexpected void impressions telegraphing to the surface. The focus on panel thickness consistency across the sheet matters when setting dado depths, hinge cup boring depths, or aligning edge-banded parts, since a more uniform thickness helps settings translate from one part to the next. The smoothness of the final surface produced by this sequence reduces the amount of surface preparation before finishing, which can save time over multiple panels in a run. With the 48.5 x 96.5 inch format, yield planning can take advantage of both the oversized dimensions and the stable thickness to nest components efficiently while keeping edges within the more consistent central field of the sheet.
This States Industries plywood hardwood veneer core panel has a 1/2 inch thickness, which suits designs built around half-inch case parts and allows a balance between rigidity and overall panel weight.
The panel size is 48.5 x 96.5 inches, giving slightly oversized dimensions relative to nominal 4 x 8, which provides trim allowance for squaring edges and maximizing component yield.
This maple plywood is grade B-2, meaning the primary face is selected to be better than the back, which works well when one visible side is prioritized in cabinet or millwork layouts.
The two step layup first builds and sands a core blank, then applies the face and back veneers, which promotes a smoother surface and more consistent thickness for cutting and joinery setups.
This panel uses a western fir veneer core, giving a wood-based core structure that works with standard woodworking tools and typical plywood machining operations.
The maple faces are natural and unfinished, allowing finishers to apply their preferred coating system so color and sheen can be tailored to the project.
This States Industries 1/2 inch Plywood Hardwood Veneer Core panel combines a domestic natural maple rotary face with a western fir veneer core, giving a maple-faced plywood designed for projects that need a presentable B-2 face. The 48.5 x 96.5 inch oversized sheet offers layout flexibility and trim allowance when breaking down parts. The two step layup construction, with puttied inner plies and post-sanding veneer application, supports a smoother surface and more consistent panel thickness, which is useful for repeatable machining and finishing in cabinet or woodworking production.
Sold In: 1 Sheet