Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Universal cabinet soft-close adapters give Salice "S" series face frame hinges a one-piece soft-close device, so you can add controlled closing to existing layouts without changing hinge models. The Salice America Smove adjustable design works as a soft-close adapter, so you can fine-tune the closing action to suit different cabinet door setups on the same job. This soft-close device is classified as a hinge accessory, so it fits naturally into standard cabinet hardware planning and ordering. The unit mounts to the cabinet, not the door, so hinge positions stay unchanged during retrofits. The design works as a soft-close adapter for face frame applications, so it suits typical kitchen and bath cabinet construction. The Smove designation identifies the integrated soft-close technology, so you can match it with other Salice soft-close planning on larger projects.
The soft-close adapter attaches using a common #6 x 5/8 inch wood screw, so fastening matches typical cabinet construction methods. The integrated front locator tab establishes precise positioning, so the device sits where the hinge system expects it, supporting reliable soft-close performance. Assembly tabs set positioning from the cabinet side, so you can reference from a stable edge instead of measuring from multiple internal points. These built-in locators help maintain consistent placement across a bank of cabinets, which supports even closing feel from door to door. Because mounting locations shift between top rail and side rail depending on overlay, the adapter aligns with the door path so the soft-close action can engage as designed.
This one-piece soft-close device is used with Salice "S" series face frame hinges, so it fits cabinets built around that hinge family. Mounting to the top rail on overlays less than 1 inch places the adapter above the hinge line, aligning with standard face frame geometry in many kitchen cabinets. Mounting to the side rail on overlays 1 inch and greater shifts the device alongside the door edge, which suits doors that cover more of the face frame. The non handed configuration allows installation on either the left or right side of a door, so it works across a full cabinet run without separate left and right versions. Only one Smove unit is required per door, so planning per opening is straightforward on drawings and parts lists. Being a soft-close adapter within the hinge accessories category, it fits into projects that already specify Salice America hardware.
The easily adjustable Smove mechanism adapts to varying door styles, weights, and overlay applications, so installers can tune closing speed to prevent door bounce or hard impact on frames. Precise positioning from the integrated front locator tab gives a repeatable reference point, which supports consistent behavior across multiple doors on a wall of cabinets. Assembly tabs that reference the cabinet side provide a built-in gauge, so layout time is reduced compared to custom measurements on each opening. Using a common #6 x 5/8 inch wood screw matches a widely used cabinet fastener size, which helps keep tool and bit changes minimal during installation. Non handed operation means one Smove unit can serve either side, so inventory is simpler and on-site swaps between openings stay straightforward. With only one Smove required per door, soft-close performance can be added efficiently across an entire job while keeping part counts manageable.
This soft-close adapter is for use with Salice "S" series face frame hinges, so it is tied directly to that hinge family in cabinet layouts.
The adapter mounts to the top rail for overlays less than 1 inch and to the side rail for overlays 1 inch and greater, so the soft-close action matches the door overlay.
The soft-close adapter attaches using a common #6 x 5/8 inch wood screw, so fastening fits standard cabinet construction and common tooling.
The integrated front locator tab and assembly tabs set precise positioning from the cabinet side, so each unit aligns consistently for uniform soft-close performance.
The Smove adapter is non handed, so one unit serves either left or right side mounting, reducing different parts on a job.
Only one Smove adapter is required per door, so planning quantities is straightforward when counting door openings on a project.
This Smove adjustable soft-close adapter from Salice America is designed as a one-piece device for "S" series face frame hinges, so it aligns with projects built around that hinge line. With mounting options on either top rail or side rail based on overlay, it suits a range of cabinet door coverages using the same part. The non handed design and single-unit-per-door requirement keep ordering and layout simple across multiple openings. For cabinet work where controlled closing and repeatable placement matter, this soft-close adapter offers a focused solution built around the D0UXHG part configuration.
Sold In: 1 Each