Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Armorcore 5 ply blank 3/4x4x8 identifies this States Industries plywood panel as a 3/4 inch thick blank sized for common 4 by 8 layouts, so it fits standard shop workflows for cabinet and case construction. The product is defined as Plywood Hardwood Raw in the board panel product category, which gives a raw working surface ready for the installer or shop to process as needed. The panel uses an Armorcore MDF/Veneer hybrid substrate, combining the strength of a veneer core with the flatness and density of MDF, so it supports structural cabinet roles while helping panels stay flatter for clean joinery and stable assemblies. The sheet measures 48.5 by 96.5 inches, giving extra trim margin beyond nominal 4 by 8 dimensions, which allows squaring edges and scribing without losing required finished size on doors, partitions, and end panels.
This plywood panel is specified at 3/4 inch thickness, which gives a familiar reference for layout, joinery depth, and hardware locations across standard cabinet designs. With sheet dimensions of 48.5 by 96.5 inches, there is built-in oversize compared with nominal 4 by 8 stock, which helps when optimizing cut diagrams for sides, bottoms, tops, and stretchers while still leaving room to clean up factory edges. The product is identified as a blank, so the sheet arrives ready for the shop to cut to final dimensions, allowing the installer or fabricator to match field measurements and sequence cuts according to project needs without being constrained by pre-cut part sizes.
This product sits in the Board Panel Products category as Plywood Hardwood, Domestic and Import, signifying a role as a primary sheet good for woodworking and cabinet construction. The Armorcore MDF/Veneer hybrid substrate combines veneer core strength with MDF flatness and density, which positions it well where both structural performance and smooth, stable surfaces matter, such as cabinet sides, fixed shelves, and partitions. With a 3/4 inch thickness and 48.5 by 96.5 inch format, the panel suits projects laid out around standard 4 by 8 modules, so it can be used for bases, tall units, and utility cabinets that follow common spacing and height conventions. The States Industries brand and the specific Armorcore name help identify the sheet within a shop inventory system, so repeat projects can call out the same substrate for consistent performance across different runs.
The Armorcore MDF/Veneer hybrid substrate is described as combining veneer core strength with MDF flatness and density, which supports repeatable accuracy when building cabinet boxes and other furniture components. Veneer core strength helps the sheet handle fastening and handling loads during assembly, while MDF flatness and density promote smooth surfaces, which is useful when cutting precise joints or preparing faces for later finishing steps. The 5 ply blank construction spreads performance through multiple layers, which matters when machining into the panel for grooves or dados that rely on internal stability. The 3/4 inch thickness provides a dependable reference dimension for setting tooling and aligning parts in jigs, supporting consistent reveals and flush conditions from job to job. The 48.5 by 96.5 inch overall size offers extra trimming space, which assists in dialing in accurate final dimensions while accommodating on-site adjustments dictated by field conditions.
The Armorcore 5 ply blank 3/4x4x8 panel is a States Industries plywood hardwood raw sheet with an Armorcore MDF/Veneer hybrid substrate, designed as a 3/4 inch thick, approximately 4 by 8 foot panel.
The Armorcore MDF/Veneer hybrid substrate combines veneer core strength with MDF flatness and density, supporting structural cabinet roles while helping panels stay flatter during machining and assembly.
The panel measures 48.5 by 96.5 inches, giving extra margin beyond nominal 4 by 8 sizing, which is useful for trimming edges and squaring parts to final dimensions.
The plywood hardwood raw sheet has a 3/4 inch thickness, providing a substantial core that suits cabinet boxes, shelving, and similar structural components in woodworking projects.
The description ARMORCORE 5 PLY BLANK,3/4X4X8 indicates a multi-layer plywood construction supplied as a blank sheet, supporting consistent internal stability when machining joints and profiles.
This panel is manufactured by States Industries, providing a defined source that helps shops specify and repeat the same Armorcore substrate across projects.
The Armorcore MDF/Veneer hybrid substrate, combining veneer core strength with MDF flatness and density, gives this 3/4 inch plywood hardwood raw sheet a defined role for cabinet and woodworking projects where structural performance and surface stability matter. The 48.5 by 96.5 inch 5 ply blank format supports efficient layout of cabinet parts with trim room for squaring and fitting in the shop or on site. With clear identification as an Armorcore 5 ply blank 3/4x4x8 from States Industries, this panel offers a consistent specification that can be written directly into shop drawings and cut lists for repeatable results.
Sold In: 1 Sheet