Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The VMI 5082 is a dedicated on/off wall switch rated at 5 amps, designed to provide a fixed wall-mount control point for a compatible range hood ventilator.
Some hood installations route the on/off control to the wall rather than relying on a switch mounted to the hood body itself. This VMI wall switch fills that role: it mounts at a standard wall box location and gives the cook a single, accessible point to power the ventilator on or off. At 5 amps, the switch is sized to handle the load of the ventilator motor without a relay or additional hardware in a typical single-unit installation.
The 5-amp rating is the governing spec for this switch. Before specifying it as a replacement or as part of a new installation, confirm that the ventilator's current draw falls within that rating. For hood systems with multiple blower speeds or higher-draw motors, verify the amperage requirement against the motor spec. Installation connects the switch in the ventilator's power circuit at the wall, so it should be handled by someone comfortable with low-voltage wiring in a residential or light commercial setting.
This switch suits a wood hood installation where the on/off control is meant to live at the wall, not at the hood face. It is also the right part when an existing VMI switch has failed and a like-for-like replacement is needed to restore function without rewiring the circuit. Designers specifying a custom wood hood with a clean, panel-consistent look will find a wall-mounted control keeps the hood face free of visible hardware. Cabinet shops and installers finishing a hood run can stock this switch to close out the electrical portion of the job cleanly.
It is a VMI brand accessory intended for use with VMI (Air-Pro) ventilation installations. Confirm the amperage draw of the specific ventilator model before installing, since compatibility depends on the motor's current draw staying within the 5-amp rating.
This is an on/off switch only. It does not provide variable speed control. If the installation requires speed adjustment at the wall, a different control is needed.
Yes. This switch is the appropriate like-for-like replacement for a VMI wall-mount on/off control, provided the ventilator's current draw is within 5 amps.
A hood that ventilates well needs a control that works reliably. This VMI wall switch closes out the installation with a purpose-built on/off point matched to the ventilator it serves.