A Stainless Steel Sink Built for the Working Kitchen

The Karran Edge 560 is an 18-gauge stainless steel double-bowl kitchen sink from the Edge 500 series that mounts seamlessly beneath laminate or solid surface countertops. Its unequal 60/40 bowl split gives a larger wash basin alongside a smaller prep or rinse station, all in a 32-inch footprint designed for a 36-inch minimum cabinet.

Key Features

• 18-gauge stainless steel construction for a durable, full-metal sink body throughout.
• Seamless undermount installation designed specifically for laminate and solid surface countertops.
• Unequal 60/40 double-bowl configuration with a larger left bowl and a dedicated smaller right bowl.
• 9-inch inside depth in both bowls for accommodating larger pots and sheet pans.
• IAPMO certified for verified performance against plumbing product standards.
• 3-1/2 inch drain openings in each bowl for standard drain and disposal hardware.

Two Bowls, One Workflow

A 60/40 split puts the larger bowl where most of the washing happens and reserves the smaller bowl for rinsing produce, draining pasta, or keeping a prep colander in place without blocking the main basin. Both bowls share the same 9-inch depth, so a stockpot or a full sheet pan slides in without fighting the rim. This layout suits a primary kitchen sink where the counter sees daily volume work, whether that is a home cook running a full dinner service or a cabinet shop remodeling a client's kitchen and specifying every detail down to the drain.

Stainless Steel, Seamlessly Undermounted

The Edge 560 is built from 18-gauge stainless steel and uses Karran's seamless undermount method, which bonds the sink directly to the underside of the countertop rather than dropping in from above with a visible clip-and-caulk rim. That seamless bond is what makes laminate and solid surface installations possible, countertop materials where a traditional undermount would wick moisture into the substrate over time. The stainless finish is consistent across the bowl interior, and the flat-front profile of the Edge 500 series keeps the look clean and contemporary without decorative curves or rolled edges that complicate the install.

Where This Sink Fits

Specify this sink in a kitchen designed around laminate or solid surface countertops where an undermount look is the goal. The 32-inch overall length fits a 36-inch base cabinet, and the 21-1/2 inch front-to-back dimension works in a standard 24-inch-deep counter run. It is a practical choice for a renovation where the countertop is being replaced at the same time as the sink, or a new build where the countertop fabricator is bonding the sink during fabrication. Because the installation method is seamless undermount rather than a standard clip undermount, plan it into a new countertop, not a drop-in replacement into an existing cutout.

Common Questions

A Stainless Sink That Works as Hard as the Kitchen Does

The Edge 560 delivers a full-depth 60/40 double-bowl layout in 18-gauge stainless, bonded seamlessly under laminate or solid surface for a clean undermount finish that holds up to daily use.