Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
ADVANTAGE PLUS 6 PULL 128MM CC BRSH NKL identifies this Berenson Corporation handle as part of the Advantage Plus Six Series, which places it in a consistent design family that keeps cabinet and drawer fronts visually coordinated across a project. The pull uses an aluminum construction, which provides a lightweight handle that is straightforward to handle during layout and installation on doors or drawers. Its brushed nickel finish delivers a muted metallic look that helps conceal fingerprints and minor marks in daily cabinet use. A center to center dimension of 5-1/16 inches, or 128 mm, sets a clear drilling pattern for installers, which simplifies planning hole locations on cabinet faces. The pull length of 5-1/2 inches leaves a small margin beyond the mounting holes, giving fingers room to grab while staying within standard drawer front widths.
The 5-1/16 inch center to center layout defines where to drill two mounting holes, which lets installers plan jigs or templates around a fixed 128 mm spacing. With a 1 inch projection from the cabinet face, the pull stands out far enough that fingers can wrap behind the bar, which helps users open heavier drawers with a full grip. The 13/16 inch width contributes to a balanced look on face frames and slab fronts, which can matter when aligning several pulls across a bank of cabinets. A 5-1/2 inch overall length ties these dimensions together, which positions the grip within standard door and drawer proportions.
This Berenson Advantage Plus Six Series pull, identified by part number 9406-4BPN-P, belongs to the decorative hardware and moldings category for handles and pulls, which directs it to cabinet and furniture front applications. The 5-1/16 inch, or 128 mm, center to center sizing matches a common drilling standard, which supports layouts on new cabinet doors and drawer fronts that follow metric or fractional templates. Its 5-1/2 inch overall length keeps it in a mid-size range, which suits many kitchen, bath, and shop cabinet fronts without dominating narrow faces. A brushed nickel finish on aluminum coordinates with other brushed nickel decorative pieces, which helps maintain a unified metal tone across knobs, hinges specified to match, and other visible hardware. The 1 inch projection and 13/16 inch width define the handle volume in front of the door, which gives a clear sense of how far it will extend into working space.
The 5-1/16 inch (128 mm) center to center measurement on this Advantage Plus 6 brushed nickel pull provides a repeatable drilling pattern, which helps installers keep rows of pulls aligned across multiple cabinet runs. Its 3/8 inch base dimensions at each mounting point limit the footprint at the contact area, which can assist with positioning the pull on narrow stiles without overhanging molded edges. With a 1 inch projection, the pull offers consistent stand-off from the cabinet face, which supports a comfortable grip along the entire installation line. The 13/16 inch width gives a stable gripping surface, which can distribute pulling force evenly when users operate wider or heavier drawers. A 5-1/2 inch overall length ties these metrics into a centered handle form, which helps maintain equal reveal on both sides of the mounting holes for a balanced visual layout.
The Berenson Advantage Plus Six pull has a 5-1/16 inch, or 128 mm, center to center span, which defines the drilling distance between mounting holes during cabinet or drawer installation.
The Advantage Plus 6 brushed nickel pull projects 1 inch from the cabinet face, which creates finger clearance between the handle and door or drawer front during everyday use.
The Berenson 9406-4BPN-P pull measures 5-1/2 inches in overall length, which provides grip length slightly beyond the 5-1/16 inch mounting span for comfortable hand placement.
This cabinet pull uses aluminum with a brushed nickel finish, which offers a metallic appearance that works well with other brushed nickel decorative elements.
The pull has a width of 13/16 inch, which creates a broad gripping surface for fingers when opening cabinet doors and drawers.
Each mounting base on this Berenson pull has 3/8 inch dimensions, which provides a compact footprint at the contact points on the cabinet surface.
The Berenson Advantage Plus Six Series aluminum pull with brushed nickel finish combines a 5-1/16 inch (128 mm) center to center span, 5-1/2 inch overall length, 1 inch projection, and 13/16 inch width, which together define a mid-size handle suited to many cabinet layouts. Using these fixed dimensions when planning door and drawer fronts helps keep drilling patterns consistent and finished rows aligned. For projects built around brushed nickel decorative hardware, this pull offers a matched look within the Advantage Plus 6 design family across multiple cabinets.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BQ9426-1BPN-P Mfr# 9426-1BPN-P | Berenson Advantage Plus Six Brushed Nickel 1-7/16" (37 mm) L x 3/4" (19 mm) W Knob, 9426-1BPN-P | ||||
Sold in: 1 Each |  BQ9407-4026-P Mfr# 9407-4026-P | Berenson Advantage Plus Six 5-1/16" (128 mm) Center to Center Polished Chrome Pull, 9407-4026-P |
