
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
SKSXP-L wire stapler 18 gauge from Senco Products, Inc. is a power stapler built for woodworking tasks such as cabinets, drawers, spring clip attachment in furniture assembly, trim, molding, and wood crafts, so it suits common shop work. The stapler uses 18 gauge fasteners with a 1/4 inch crown, which focuses the holding power into a narrow profile that helps when fastening smaller wood components. Its staple length range of 7/8 inch to 1-1/2 inch lets one tool cover thin cabinet parts up through thicker furniture joints. Operating air pressure from 70 to 120 psig ties into typical shop air systems, so it runs within common compressor settings. A tool weight of 4.2 lb balances control and maneuverability, which matters when stapling drawers, trim, or crafts through a full day.
The SKSXP-L body measures 9.375 inches high and 12.375 inches long, giving a profile sized for reaching inside cabinets or along drawer boxes while still fitting around common jigs. Operating air pressure between 70 and 120 psig provides a window to tune drive depth within standard shop air systems. The 4.2 lb weight helps steady the nose on trim, molding, or crafts while still allowing one-handed positioning during furniture assembly. The 7/8 inch to 1-1/2 inch staple length range also lets setups stay consistent across cabinet carcasses, drawer bodies, and spring clip points by using the same stapler for multiple thicknesses.
The SKSXP-L, identified by Senco model SKSL4450 and manufacturer part number 300120N, is specified for cabinets, so it applies to attaching backs, stretchers, and light structural members in casework. Its drawer application also supports fastening drawer sides, bottoms, or runners where an 18 gauge, 1/4 inch crown footprint suits the material. Spring clip attachment in furniture assembly gives the stapler a role in securing clips or small brackets into wood frames using the adjustable 7/8 inch to 1-1/2 inch staple length range. Trim and molding use means the narrow crown can sit within profiles on casings, rails, or light moldings. Wood crafts coverage shows that the tool handles smaller project parts where an air stapler speeds assembly.
The 1/4 inch crown staple format concentrates holding strength without overly wide legs, which matters when driving near edges of cabinet parts or trim. The 18 gauge wire size supports fastening that bites into wood while keeping a relatively small imprint, helpful when pieces will be filled, painted, or otherwise finished. Contact actuation firing means the nose contacts the surface and drives as the tool is moved, which helps maintain consistent staple spacing during long cabinet sides or molding runs. Staple capacity of 158 staples reduces the number of magazine openings, so setup alignment on jigs or fixtures can stay undisturbed longer. Dimensions of 9.375 inches high and 12.375 inches long provide room for hand placement around the grip while still reaching into cabinet interiors. Operating at 70 to 120 psig gives a pressure span to match different wood densities or staple lengths by adjusting air settings. The Never br Lube design that requires no lubrication limits oil migration toward work surfaces, which supports cleaner cabinet and furniture assembly where finish quality is important, and quiet operation then makes repetitive stapling more manageable during extended production runs.
The SKSXP-L wire stapler uses staples from 7/8 inch to 1-1/2 inch long, covering a range suited to cabinets, drawers, furniture spring clips, trim, molding, and wood crafts.
The Senco SKSXP-L operates at 70 to 120 psig, so it runs within typical shop compressor ranges and can be tuned for different wood density and staple length combinations.
The SKSXP-L magazine holds 158 staples, which reduces reload frequency during cabinet, drawer, trim, or furniture clip runs and keeps work moving steadily.
The Senco SKSXP-L staple gun uses contact actuation firing, allowing continuous stapling while the trigger stays pulled, which supports faster production passes on longer workpieces.
The SKSXP-L is designed for cabinets, drawers, spring clip attachment in furniture assembly, trim, molding, and wood crafts, focusing on woodworking tasks in shop or job settings.
The SKSXP-L stapler is 9.375 inches high, 12.375 inches long, and weighs 4.2 lb, providing a balance of reach and control for cabinet interiors, drawers, and trim work.
The SKSXP-L wire stapler, 18 gauge, pairs a 1/4 inch crown with a 7/8 inch to 1-1/2 inch staple length range, giving coverage from cabinets and drawers to trim, molding, and wood crafts. Its E-Z Load/E-Z Clear system and contact actuation firing support steady production on cabinet or furniture lines. With operating air pressure of 70 to 120 psig and a 4.2 lb body sized at 9.375 inches high by 12.375 inches long, it fits typical woodworking shop setups. For woodworking operations that need one air stapler across cabinets, drawers, spring clips, and trim, this Senco model 300120N provides those capabilities in a single tool.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Box | SNL11BAB Mfr# L11BAB | Senco 18 Gauge x 1/4" Crown x 3/4"L Staple, L11BAB - 5000/Box | ||||
Sold in: 1 Box | SNL12BAB Mfr# L12BAB | Senco 18 Gauge x 1/4" Crown x 7/8"L Staple, L12BAB - 5000/Box | ||||
Sold in: 1 Box | SNL14BAB Mfr# L14BAB | Senco 18 Gauge x 1/4" Crown x 1-1/8"L Staple, L14BAB - 5000/Box | ||||
Sold in: 1 Box | SNL15BAB Mfr# L15BAB | Senco 18 Gauge x 1/4" Crown x 1-1/4"L Staple, L15BAB - 5000/Box | ||||
Sold in: 1 Box | SNL17BAB Mfr# L17BAB | Senco 18 Gauge x 1/4" Crown x 1-1/2"L Staple, L17BAB - 5000/Box | ||||
Sold in: 1 Each | SNYK0376 Mfr# YK0376 | Stapler/Nailer Accessories Repair Kits and Parts - Senco Products, Inc. YK0376 |