Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Nexis 85 degree opening angle reduction clip is a Grass America hinge angle restriction clip designed to limit a standard 110 degree full overlay or half overlay hinge to an 85 degree opening, which keeps doors from swinging too far into nearby surfaces in tight layouts. This reduction from 110 degrees to 85 degrees prevents doors from bumping adjacent fronts or walls in corner installations, so finished panels, appliances, or drywall are protected from edge impacts when doors are swung open. The clip is part of the Nexis hinge system and works specifically with standard 110 degree full overlay or half overlay hinges, giving installers a simple way to control door travel on cabinets already designed around this hinge series. The component is built for hinge angle restriction, so it solves clearance problems without changing the hinge body or reworking door and cabinet geometry.
This hinge angle reduction clip is specified for use on standard 110 degree full overlay and half overlay hinges, so it fits directly into layouts that already rely on those hinge types without needing different hinge models. By limiting the opening angle to 85 degrees, the clip helps doors stop short of nearby walls or adjacent cabinet fronts in corner installations, avoiding repeated impacts on finished edges. The product description calls it an opening angle reduction from 110 degrees to 85 degrees that prevents doors from bumping fronts or walls, so it is aimed at installations where doors would otherwise collide with surrounding elements during normal use. The part functions within the hinge system as a restriction element, providing angle control through this dedicated component rather than changing door size.
The Nexis 85 degree opening angle reduction clip is identified for standard 110 degree full overlay and half overlay hinges, so it applies to cabinet doors mounted with these Grass America hinge formats wherever door travel needs to be limited. In corner installations, the product description states that reducing from 110 degrees to 85 degrees prevents doors from bumping fronts or walls, which aligns it strongly with inside corners and perpendicular runs where one cabinet line meets another. Because it is classified under hinges and hinge angle restriction clips, it is intended for use within the hinge area on cabinet doors rather than elsewhere on the cabinet, keeping the control point directly at the door pivot. This focused role allows designers and installers to address clearance problems right at the hinge without modifying surrounding casework or wall placement.
The specified reduction from a 110 degree opening to an 85 degree opening shortens the swing path of the door, so the leading edge stops sooner and stays inside a safer clearance envelope relative to adjacent fronts or walls. The web description notes that this reduction prevents doors from bumping fronts or walls in corner installations, translating directly into fewer marks, chips, or wear on finished cabinet faces and wall surfaces in those high-contact areas. Because the clip is tailored to standard 110 degree full overlay and half overlay hinges, it allows installers to maintain the same hinge series while dialing back motion, which supports consistent hardware selection across a run of cabinets even when only a few doors are near corners. The part is described as black plastic, which keeps the restriction element visually discreet in typical hinge cup zones, allowing the hinge system to deliver its functional angle control without drawing attention when doors are opened for everyday use.
The Nexis 85 degree opening angle reduction clip is designed for standard 110 degree full overlay and half overlay hinges, so it works within those specific hinge formats in cabinet applications.
The reduction clip changes a standard 110 degree hinge opening to 85 degrees, which shortens the door swing to keep the door edge farther from nearby surfaces.
The opening angle reduction from 110 degrees to 85 degrees prevents doors from bumping fronts or walls in corner installations, protecting finished cabinet faces and walls from repeated contact.
The product name identifies it as a Nexis 85 degree opening angle reduction clip from Grass America, so it is aligned with the Nexis hinge line for standard 110 degree applications.
The hinge angle reduction clip is described as black plastic, which keeps the component visually subdued within typical hinge cup areas inside cabinets.
On standard 110 degree half overlay hinges, the reduction to 85 degrees limits door swing, reducing the chance that two doors on a shared partition open into each other.
The Nexis 85 degree opening angle reduction clip from Grass America offers a defined change from a 110 degree opening to an 85 degree opening for standard full overlay or half overlay hinges, which gives projects predictable door travel around corners. Because the description highlights that this reduction prevents doors from bumping fronts or walls in corner installations, it serves as a focused solution wherever cabinet doors operate close to adjacent faces or room boundaries. For layouts built around standard 110 degree Nexis-style hinges, this hinge angle restriction clip provides a way to control door motion while maintaining the same hinge family and overall cabinet design intent.
Sold In: 1 Each
