Berenson Harmony Series 3" (76 mm) Center to Center Brushed Nickel Pull, - 9438-1BPN-P

Berenson Harmony Series 3 Inch Pull For Cabinets

Berenson Harmony Series 3 inch pull is a zinc die cast cabinet handle in a brushed nickel finish, so it gives cabinet fronts a consistent metal look that matches other brushed nickel decorative hardware in a project. The pull has a 3 inch center to center dimension, which aligns with standard 3 inch boring patterns on many cabinet doors and drawers, helping streamline layout on new work or replacements where that drilling pattern already exists. Overall length is 3-11/16 inches, giving a little overhang beyond the screw centers so fingers have room to grab without crowding the fastener points. Projection is 1-1/8 inches, so the pull stands off the face of the cabinet enough for a comfortable hand grip while still keeping a low profile that stays close to the door surface. Width is 11/16 inch, providing a narrow front edge that looks clean across banks of doors.

Key Harmony Brushed Nickel Pull Details

• The Harmony collection identity ties this pull to a coordinated Berenson family, which helps keep a uniform style across doors and drawers in the same room when specifying multiple handle sizes.
• Zinc die cast material gives the pull a solid metal construction, so each handle feels substantial in the hand and maintains the defined edge profile that installers expect on decorative hardware.
• The brushed nickel finish provides a muted metallic surface that helps cabinet faces hide minor fingerprints and daily wear marks better than a high-gloss finish during normal use.
• A 3 inch center to center dimension matches many existing cabinet drill patterns, which helps speed change-outs when swapping older handles to this Harmony Series profile.
• Overall length of 3-11/16 inches gives visual coverage across typical cabinet rail widths, which helps the handle look proportional on both door stiles and drawer fronts.
• Base dimensions of 9/16 inch at each foot provide a defined footprint against the cabinet surface, which helps visually frame the screw locations on painted or stained wood.

Installation Use Of 3 Inch Center To Center Pull

This 3 inch center to center pull is designed around a common mounting dimension, so it lines up with many pre-drilled cabinet doors and drawers that already use 3 inch boring. The pull uses an 8-32 thread screw interface, which fits a widely used cabinet hardware thread size, helping it tie into standard drilling and fastening setups in the shop or on site. The 1-1/8 inch projection creates working space between the pull and cabinet face, so hands can wrap the handle without scraping fingers across the door surface during operation. Base dimensions of 9/16 inch at each mounting point keep the contact area compact, so the feet sit cleanly within narrow rail widths while still framing the mounting holes clearly for alignment.

Where This Brushed Nickel Cabinet Pull Works

Harmony Pull Dimensions For Cabinet Layouts

The brushed nickel cabinet pull from the Harmony collection uses a 3 inch center to center spacing, which fits many standard face frame and frameless cabinet layouts where handles line up along rails or drawer fronts with that drilling pattern. With a 3-11/16 inch overall length, the pull spans slightly beyond the mounting holes, giving a balanced look on common drawer widths without overwhelming small doors. The 11/16 inch width keeps the front profile slim, which helps maintain tight reveal lines when several pulls are installed in a row across a bank of cabinets. A projection of 1-1/8 inches sets the grip out from the face enough for fingers to hook from below or above, supporting both vertical door pulls and horizontal drawer applications.

Details That Support Consistent Cabinet Results

The zinc die cast construction of this Harmony pull provides a uniform body, so each handle in a run presents the same shape and edge detail for consistent visual lines across a kitchen or built-in. The brushed nickel finish brings a steady, satin-style appearance that coordinates with many nickel hinges and other decorative hardware, helping a project read as one matched set. The base dimensions of 9/16 inch at each foot concentrate the contact area, which helps installers align the feet with layout marks or tape templates so rows of pulls track straight along a cabinet run. Use of 8-32 thread mounting fits into common shop drilling practices, so installers can rely on familiar bit and tap combinations when preparing doors and drawers that will carry this Berenson Harmony Series 3 inch pull.

Common Questions About This Harmony Cabinet Pull

Select This Harmony Pull For Brushed Nickel Projects

The Berenson Harmony Series 3 inch pull combines zinc die cast construction, a brushed nickel finish, and a 3 inch center to center layout, so it fits projects using that drilling pattern with a coordinated metal look. With 3-11/16 inch overall length, 1-1/8 inch projection, and 11/16 inch width, the handle balances comfortable gripping space with a slim profile that works across many cabinet door and drawer sizes. For cabinet hardware layouts built around brushed nickel and standard 3 inch spacing, this Berenson 9438-1BPN-P pull offers a consistent option to carry through the run.