Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Harmony brushed nickel pull is a zinc die cast cabinet handle designed for projects that need a consistent, modern look from piece to piece. The Harmony Series identity ties this pull to a coordinated line from Berenson Corporation, which helps maintain a unified style across a run of doors and drawers. The brushed nickel finish diffuses light across the surface, which reduces sharp glare on vertical cabinet faces and keeps the handle looking even from different viewing angles under jobsite or shop lighting.
The 6-5/16 inch (160 mm) center to center drill dimension sets the handle spacing, so layouts stay consistent across multiple cabinet fronts. The overall 6-7/8 inch length gives enough hand contact for everyday use without crowding typical face widths in standard cabinet work. A projection of 1-1/8 inch carries the grip out from the door or drawer face, creating finger clearance that supports smooth opening.
The Harmony Series 6-5/16 inch center to center pattern defines the mounting layout, so once the first set of holes is established the same measurement repeats down a bank of doors. The base dimensions of 9/16 inch at each end provide a compact footprint where the pull meets the surface, which is useful when working near panel edges or narrow rails. The 11/16 inch width through the bar relates directly to hand feel, giving enough surface to grip without pushing the bases too close to neighboring design elements on the door.
The 6-7/8 inch overall length pairs with the 1-1/8 inch projection to shape ergonomics, so users have room to pull straight out without scraping knuckles against the cabinet face. The 8-32 x 1 inch screw size specified in the description sets the thread and length expectation, which aligns with common cabinet door and drawer front thicknesses used in many woodworking projects.
The Harmony Series 6-5/16 inch center to center layout matches a common spacing used across many cabinet designs, which helps when planning straight runs of doors and drawers with repeated hardware positions. Because the length or diameter is specified at 6-7/8 inch, this pull spans a noticeable portion of the stile or drawer front, which supports a balanced look on medium-width cabinet fronts. The 11/16 inch width of the pull bar works with the overall length to create a handle that reads as substantial without overpowering the face of standard cabinet components.
The 1-1/8 inch projection dimension defines the standoff from the door or drawer, giving fingers room to wrap behind the bar for a secure grip while opening. Zinc die cast material offers a solid-feeling structure, so when fixed at the 6-5/16 inch centers the pull acts as a firm bridge between mounting points. The brushed nickel finish on the zinc body keeps the visual tone muted, which helps this handle sit comfortably in both light and darker cabinet schemes using brushed nickel elements elsewhere in the space.
The 6-5/16 inch (160 mm) center to center measurement is a precise drilling dimension, which allows templates and jigs to be set once and then applied repeatedly across an entire room of cabinets. The 9/16 inch base dimensions at each mounting point tell you how much flat surface is covered at the contact area, which matters where rails or stile widths are tight and visual margins on either side of the base are part of the design. The 6-7/8 inch overall length relates directly to alignment with panel geometry, letting the pull stretch closer to the edges on wider drawers while still fitting comfortably on standard doors.
The 11/16 inch width combines with the 1-1/8 inch projection to define the three-dimensional profile, which affects both hand comfort and how far the pull stands off the face visually. The zinc die cast construction allows the shape, width, and projection to repeat accurately from piece to piece, supporting a uniform appearance on long cabinet runs. The specified 8-32 x 1 inch screw size pairs with the pull body to create a known fastening interface, aligning with many established cabinet construction practices used in shops and on site.
The Berenson Harmony Series pull has a 6-5/16 inch (160 mm) center to center dimension, which sets the drilling distance for consistent hole spacing across cabinet doors and drawers.
The pull has a specified length of 6-7/8 inch, giving a handle span that suits many standard cabinet doors and medium-width drawer fronts in typical woodworking layouts.
The Harmony Series pull projects 1-1/8 inch from the cabinet surface, creating usable finger clearance behind the bar for a comfortable grip during opening and closing.
The Berenson 9456-1BPN-P pull is made from zinc die cast, which provides a solid, uniform body that supports consistent sizing and a stable feel when installed.
The pull has a brushed nickel finish, giving it a soft metallic appearance that coordinates with other brushed nickel elements on many cabinet and woodworking projects.
The Harmony Series pull is specified with 8-32 x 1 inch screws, aligning with common cabinet door and drawer front thicknesses for straightforward fastening.
The Berenson Harmony Series 6-5/16 inch center to center brushed nickel pull brings a defined set of dimensions to cabinet hardware planning, from its 6-7/8 inch overall length to its 1-1/8 inch projection and 11/16 inch width. The zinc die cast construction and brushed nickel finish create a consistent profile that works across multiple doors and drawers when a unified look is important. With its 9/16 inch base dimensions and specified 8-32 x 1 inch screw size, this pull aligns with common cabinet construction details, making it a solid choice when selecting hardware for new installations or updates.
