Berenson Fluidic Series 3-3/4" (96 mm) Center to Center Polished Chrome Pull, - 9475-1026-P

Berenson Fluidic 96mm Pull For Cabinets

Berenson Fluidic 96mm pull is a zinc die cast cabinet handle in the Fluidic Collection with a polished chrome finish, so it gives cabinets a defined modern look while using a material that supports a solid feel in daily use. The 3-3/4 inch (96 mm) center to center drilling sets consistent spacing between screw holes, which simplifies layout on cabinet doors and drawers when matching across a project. Overall length of 4-11/16 inches means the pull extends beyond the mounting points, giving fingers more room to grab the handle during opening and closing. A projection of 1-3/16 inches sets the handle away from the cabinet face, creating clearance for knuckles while maintaining a tight profile on the door or drawer front. Width of 13/16 inch provides a comfortable gripping surface, balancing contact area with a streamlined appearance on cabinetry.

Key Fluidic Pull Dimensions That Matter

• The 3-3/4 inch center to center drilling matches a common cabinet hole pattern, which helps align this pull with standard boring setups and keeps handle spacing uniform across multiple fronts.
• The 4-11/16 inch overall length extends beyond the mounting points, giving extra grab area so hands can center on the pull rather than gripping close to the screws.
• The 1-3/16 inch projection brings the pull off the cabinet surface enough for fingers to wrap behind it, reducing knuckle contact with the door while still keeping the hardware close to the face.
• The 13/16 inch width creates a stable gripping bar, which helps distribute hand pressure along the pull during opening and closing of heavier cabinet drawers or doors.
• The base dimensions of 7/16 inch define the footprint at each mounting point, giving a compact contact area that can sit fully on standard cabinet rails and stiles without crowding edges.
• The polished chrome finish presents a reflective surface, which coordinates with other chrome decorative hardware and fixtures in the same space for a consistent appearance.

Installation Details For The 96mm Pull

The 3-3/4 inch (96 mm) center to center measurement on this Fluidic Series pull sets the distance between mounting holes, so it can be laid out directly from that dimension during drilling of cabinet doors and drawers. The zinc die cast construction keeps the pull rigid at those two points, helping it sit flat to the cabinet surface once mounted. The 7/16 inch base dimensions define the contact area at each screw location, which is useful when positioning the pull on narrow rails or stile faces. Screw size of 8-32 x 1 inch matches a common cabinet thread, so it works with typical cabinet front thicknesses that accept this length. The polished chrome finish covers the visible surfaces around the mounting points, so the installation holes transition cleanly into the hardware face.

How This Fluidic Pull Works On Cabinets

Where The Berenson Fluidic 96mm Pull Fits Best

The Fluidic Series identity ties this 96 mm pull to a defined collection, which helps keep handle style consistent across doors and drawers within the same room or project. The 3-3/4 inch center to center size is suited to cabinets laid out with that drilling pattern, matching standard spacing on many kitchen, bath, and storage fronts that use this measurement. Its 4-11/16 inch overall length makes the pull proportionally larger than the hole spread, so it can sit comfortably on both narrow and wider drawer fronts without appearing undersized. The 1-3/16 inch projection positions the gripping bar off the face of the cabinet, supporting use on doors that swing past nearby surfaces because the handle does not protrude excessively into the walkway. With a width of 13/16 inch, the pull spans enough surface area to look balanced on full-height doors while still working on smaller drawer faces that need a slimmer profile.

Why These Fluidic Pull Specs Support Consistent Results

The zinc die cast material gives the Fluidic pull a solid body tied precisely to the 96 mm center to center dimension, so repeated installations maintain the same alignment across a bank of cabinets. The 7/16 inch base size at each end keeps the pull seated on the flat portion of rails or stiles, which helps it register square to door edges when lining up multiple pieces. The 4-11/16 inch overall length also aids in visual alignment, because the extended ends act as references when lining up hardware across several neighboring fronts. Projection of 1-3/16 inches establishes a repeatable stand-off from the cabinet surface, setting the same hand clearance wherever this pull is used in the layout. The polished chrome finish is applied over these dimensions, so each installed pull reflects light similarly from end to end, supporting a clean row look when many pieces are mounted together.

Common Questions About This Berenson Fluidic Pull

Selecting This Fluidic Pull For Your Project

The Berenson Fluidic Series 3-3/4 inch (96 mm) center to center polished chrome pull ties precise dimensions to a known collection, giving cabinet projects a repeatable hardware choice across doors and drawers. The 4-11/16 inch length, 1-3/16 inch projection, and 13/16 inch width define how it feels in hand and how it sits on different front sizes. Zinc die cast construction with polished chrome finish supports a solid metal pull that visually aligns with other chrome decorative hardware. With defined 7/16 inch base dimensions and specified 8-32 x 1 inch screw size, this pull offers a clear set of measurements for planning cabinet drilling and layout around a 96 mm center to center standard.