Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Fluidic Series knob identifies this as a Berenson Corporation knob from the Fluidic collection, which ties finishes and shapes together across a job for a consistent decorative hardware look on cabinets and furniture. The zinc die cast material gives the knob a solid metal construction that supports repeated everyday use on cabinet doors or drawers. The polished chrome finish provides a bright, reflective surface that coordinates with other polished chrome decorative hardware for a unified appearance. The knob length of 1-3/16 inches defines the front face size, giving enough finger contact area for a positive pull without dominating smaller cabinet fronts. The 1-1/8 inch width sets a slightly rectangular footprint that visually matches modern straight-line cabinet designs while still feeling comfortable in hand. The 11/16 inch base establishes a compact mounting footprint that sits neatly on cabinet rails and stiles, helping layouts stay clean around narrow face frames.
The screw size of 8-32 x 1 inch specifies the thread and length used to secure the knob, which aligns with common cabinet drilling practices and helps installers match drilling and tapping steps to standard cabinet construction. The projection of 1-1/16 inches describes how far the knob stands off the door or drawer front, creating enough clearance for fingers to grip from the side or underneath without contacting the surface during use. The 1-3/16 inch square front dimension and 1-1/8 inch width provide clear reference points when laying out knob centerlines, helping installers space hardware consistently across multiple cabinets. The 11/16 inch base dimension indicates the area resting against the wood surface, which guides drill placement so the base fully covers the bore and any minor tear-out.
The Fluidic collection identity positions this knob for use wherever a coordinated Berenson decorative hardware family is desired, such as matching knobs and pulls across kitchen or bath cabinets. The polished chrome finish lends itself to projects that tie into polished chrome plumbing fixtures or appliances, keeping visual lines consistent from hardware to surrounding metal elements. The 1-3/16 inch length and 1-1/8 inch width make this knob suitable for standard cabinet doors and medium-width drawer fronts, giving installers flexibility to repeat the same part number on upper cabinets, base cabinets, and small utility doors. The 11/16 inch base size fits comfortably on common rail widths, so installers can position the knob on stiles or drawer faces without crowding edges or neighboring hardware. The 1-1/16 inch projection helps in tighter galley layouts where hands need clearance from adjacent cabinets while still keeping the knob relatively close to the door surface.
The manufacturer part number 9479-1026-P uniquely identifies this Berenson Fluidic knob, which allows specifiers to call out the exact length, width, and finish in project documents and keep reorders consistent. The 1-3/16 inch square front measurement gives a reliable reference when setting hardware spacing from door edges, making it easier to standardize centerlines across a large run of cabinets. The 1-1/8 inch width works with the projection of 1-1/16 inches to define the knob envelope, helping installers anticipate drawer clearance and hand access in tight banks of drawers. The zinc die cast material keeps weight and density consistent from knob to knob, which benefits large projects where uniform feel at each pull point is important. The 11/16 inch base dimension informs drilling offsets, supporting repeatable jig setups that place the base fully on flat wood without overhanging profiled edges.
The Berenson Fluidic Series knob has a 1-3/16 inch square length, 1-1/8 inch width, 1-1/16 inch projection, and an 11/16 inch base, which together define its footprint and hand clearance on cabinet fronts.
The 1-1/16 inch projection sets how far the knob stands off the door or drawer, giving enough finger room for a solid grip while keeping hardware close to the surface for a compact profile.
The Fluidic cabinet knob is made from zinc die cast, providing a metal construction that supports repeated pulls and twists typical in everyday cabinet door and drawer operation.
The Berenson polished chrome knob has a polished chrome finish, creating a bright, reflective surface that coordinates visually with other polished chrome decorative hardware and fixtures.
This Fluidic cabinet knob uses an 8-32 x 1 inch screw size, aligning with common cabinet door and drawer front thicknesses so installers can rely on standard drilling and threading practices.
The 11/16 inch base size defines the contact area against the wood, helping the knob sit fully on typical cabinet rails and stiles without overhanging narrow profiles.
The Berenson Fluidic Series knob in polished chrome combines zinc die cast construction with a 1-3/16 inch by 1-1/8 inch face and 1-1/16 inch projection, giving installers clear dimensions for layout and hand clearance. The 11/16 inch base and 8-32 x 1 inch screw size align with common cabinet front thicknesses and rail widths, supporting straightforward drilling and mounting. For projects calling for coordinated Berenson decorative cabinet hardware in a polished chrome finish, this 9479-1026-P knob offers a defined footprint and consistent material feel that suit doors and drawers across the same installation.
