
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Fluidic brushed nickel knob is a zinc die cast cabinet knob designed for furniture and cabinet doors where a compact, modern pull point is needed. The 1-3/16 inch length provides a defined gripping edge, so doors and drawers can be operated with a precise hand feel on smaller fronts. The 1-1/8 inch width creates a balanced square footprint, which helps layouts look consistent across banks of doors. A 1-1/16 inch projection offsets fingers from the door face, helping reduce knuckle contact with the surface during daily use. The brushed nickel finish presents a muted metallic surface, which can blend into many brushed nickel hinge and pull programs on the same job. An 11/16 inch base keeps contact concentrated in a smaller area, which is useful when positioning the knob on narrow rail sections or compact drawer fronts.
This zinc die cast knob uses its 1-3/16 inch length and 1-1/8 inch width to define a small square contact area, which helps maintain equal reveals when measured off rail edges. The 1-1/16 inch projection sets the working depth from the door face, which can help align the hand feel across doors when mixed with other Fluidic Series pieces of similar projection. An 11/16 inch base keeps the footprint close to the mounting point, which can be useful when centering the knob on narrow drawer fronts without visually crowding top or side edges. Screw size 8-32 x 1 inch is specified, clarifying the fastener thread and usable reach through typical cabinet front thicknesses on many wood or composite constructions.
This Fluidic Series cabinet knob from Berenson Corporation uses its 1-3/16 inch square length to create a compact, geometric pull point on doors and drawers. The 1-1/8 inch width supports that square profile, so banks of cabinets can carry a consistent visual rhythm when knobs are laid out on a full run. A 1-1/16 inch projection pulls the gripping surface forward from the face, giving enough clearance between the hand and the cabinet front to operate doors comfortably on frequently used access points. The brushed nickel finish delivers a subdued metallic tone, which works well where hardware needs to coordinate with other brushed nickel decorative hardware and hinges without drawing excess visual attention. Zinc die cast construction forms the knob body, supporting a solid feel in the hand when doors or drawers are pulled open repeatedly during daily use.
The defined 1-3/16 inch length or diameter and 1-1/8 inch width make layout measurements straightforward, helping installers set consistent centerlines from stile or drawer edges on multiple fronts. With a 1-1/16 inch projection, the working distance off the door face can be matched across a project when this knob is used as the standard pull point, which supports a uniform hand feel from one cabinet to the next. The 11/16 inch base keeps the pressure area tight around the mounting hole, which helps place the knob precisely on slimmer drawer rails or narrow cabinet frames. Screw size 8-32 x 1 inch is specified, so the threaded connection is aligned with widely used cabinet machining and drilling patterns. As part of the Fluidic collection, this knob can participate in coordinated hardware layouts where multiple pieces from the same family share similar styling cues and dimensions.
The knob measures 1-3/16 inch in square length or diameter, 1-1/8 inch in width, and projects 1-1/16 inch from the cabinet face, which defines its working footprint and clearance.
The 1-1/16 inch projection sets the gripping surface forward from the door, giving fingers room to pull without heavy contact against the cabinet front during operation.
The 9480-1BPN-P knob is zinc die cast, providing a solid metal body that supports a firm feel when opening and closing cabinet doors and drawers.
The brushed nickel finish creates a muted metallic appearance, helping this knob coordinate with other brushed nickel decorative hardware on the same installation.
The 11/16 inch base concentrates contact near the mounting point, which supports accurate placement on narrow drawer rails or slim frame sections.
This Berenson cabinet knob specifies screw size 8-32 x 1 inch, aligning with common cabinet drilling patterns and typical front thicknesses in many installations.
The Berenson Fluidic brushed nickel knob combines a 1-3/16 inch square length, 1-1/8 inch width, and 1-1/16 inch projection to create a compact, consistent pull point on cabinet doors and drawers. The zinc die cast construction and brushed nickel finish support projects where a modern metallic look and solid hand feel are important across multiple fronts. With an 11/16 inch base and specified 8-32 x 1 inch screw size, the knob provides clear dimensional references that support efficient layout and drilling in cabinet shops and on-site installations.
Sold In: 1 Each