Berenson Puritan Series Brushed Nickel 1-5/16" (33 mm) L x 1" (25 mm) W Knob, - 9490-1BPN-P

Berenson Puritan Brushed Nickel Cabinet Knob Use

Berenson Puritan Series brushed nickel knob provides a 1-5/16 inch length grip point that gives installers a defined handhold, which helps doors and drawers operate smoothly under everyday use. The zinc die cast material forms a solid, uniform knob body, which supports consistent feel across multiple cabinets on the same job. The brushed nickel finish creates a muted metallic surface, which helps fingerprints appear less obvious on busy kitchen or bath runs. A 1 inch knob width presents a compact front profile, which works well when knobs are laid out close to adjacent fronts. The 7/16 inch base size sets a contained footprint against the door or drawer face, which helps the knob sit cleanly inside narrow stile or rail sections. The 1-3/16 inch projection creates hand clearance away from the cabinet face, which supports a comfortable pull without crowding the surface.

Key Puritan Series Knob Details For Projects

• The 1-5/16 inch knob length sets a repeatable layout reference, which simplifies marking centerlines across multiple cabinet fronts on larger installations.
• The 1 inch width provides a balanced front face, which helps the knob look proportionate on standard cabinet doors and medium-width drawer fronts.
• The 1-3/16 inch projection establishes consistent stand-off from the cabinet face, which aids alignment when matching this knob across a full run of cabinets.
• The 7/16 inch base dimension defines the contact area on the door or drawer, which helps plan spacing relative to edge profiles and neighboring hardware.
• The zinc die cast construction delivers a single molded piece, which supports uniform sizing and feel from knob to knob throughout the project.
• The brushed nickel finish presents a subdued metallic tone, which coordinates with many brushed nickel hinges or faucets on the same installation.
• The 8-32 x 1 inch screw size matches a common cabinet hardware thread, which fits standard drilled holes used on many cabinet jobs.

Installation And Fit Details For This Knob

The 8-32 x 1 inch screw size on this Puritan Series knob uses a familiar cabinet hardware thread, which fits standard 8-32 tapped engagements in typical cabinet fronts. The 1-3/16 inch projection from the cabinet surface sets a predictable pull distance, which allows installers to keep knobs aligned and parallel along a bank of doors. With a 1-5/16 inch length and 1 inch width, the knob centers accurately over a single bore hole, which simplifies drilling patterns when laying out new cabinetry. The 7/16 inch base seats firmly against the face, which helps the knob register square as the screw is tightened. The zinc die cast material machines cleanly at the threaded interface, which supports reliable tightening and a secure mount on standard cabinet substrates.

How This Puritan Knob Works In Cabinet Runs

Cabinet And Drawer Applications For This Knob

This Berenson Puritan Series knob, with its 1-5/16 inch length, suits typical cabinet doors where a modest pull area is needed, which helps keep a clean look on face frames or frameless fronts. The 1 inch width keeps the grip compact, which works well on smaller vanity doors or narrow drawer fronts without overpowering the panel. A 1-3/16 inch projection gives enough depth for fingers to catch the knob, which supports comfortable operation on heavier kitchen drawers. The 7/16 inch base sits neatly on the surface area around the mounting bore, which fits well inside narrow stiles or slim rail sections. The brushed nickel finish coordinates visually with other brushed nickel hardware, which supports consistent appearance across hinges, pulls, and plumbing fixtures in the same room.

Details That Support Consistent Layout And Results

The defined 1-5/16 inch knob length provides an easy measuring reference from door edges, which streamlines repetitive layout when installing multiple knobs along tall pantry cabinets. The 1 inch width means the center mark remains well within the face of standard rails, which reduces the chance of drilling too close to a profile or edge detail. A 1-3/16 inch projection creates a fixed stand-off that, when repeated across a row, keeps all grips at the same distance from the cabinet plane, which improves visual alignment. The 7/16 inch base establishes a stable bearing surface against the door, which supports a snug, even contact when the knob is tightened from the back. The zinc die cast construction provides a consistent casting around the 8-32 x 1 inch screw connection, which helps the knob seat firmly and resist wobble during everyday operation.

Common Questions About This Puritan Series Knob

Select This Puritan Knob For Coordinated Cabinets

The Berenson Puritan Series brushed nickel knob combines a 1-5/16 inch length, 1 inch width, and 1-3/16 inch projection, which together set a dependable grip size for everyday cabinet use. The zinc die cast construction and brushed nickel finish provide a consistent look and feel, which supports running this knob across kitchens, baths, or casework using the same style. With its 7/16 inch base and 8-32 x 1 inch screw size, the knob aligns with typical cabinet drilling patterns, which streamlines selection when matching existing holes or planning new layouts.