Berenson Harmony Series 3" (76 mm) Center to Center Vintage Nickel Pull, - 9576-1VTN-P

Harmony Series 3 Inch Cabinet Pull Function

Harmony Series 3 inch cabinet pull describes the Berenson Harmony Series Vintage Nickel pull as a handle designed for cabinets and furniture doors or drawers where a 3 inch center to center mounting is required. The zinc die cast material provides a solid metal pull body that supports repetitive opening and closing in everyday cabinet use. The Vintage Nickel finish adds a controlled aged nickel look that helps the pull coordinate with similar decorative hardware finishes on the same project. The overall 3-11/16 inch length gives the pull enough hand contact area for fingers to grip comfortably during operation. A 1-1/8 inch projection sets the pull away from the cabinet face, creating clearance between fingers and the door or drawer front. The 11/16 inch width balances finger contact with a slimmer profile that suits a range of cabinet styles without feeling bulky.

Key Harmony Pull Details For Project Planning

• The 3 inch center to center dimension defines the hole spacing, which matters when laying out new drilling locations or matching existing 3 inch on-center holes in doors and drawer fronts.
• The 3-11/16 inch overall length extends slightly beyond the mounting holes at both ends, which affects how the pull aligns visually on narrower rails or drawer fronts during layout.
• The 1-1/8 inch projection establishes how far the pull stands off the surface, which influences hand clearance and helps users grasp the pull without contacting the cabinet face.
• The 11/16 inch width sets the front profile, which affects both appearance and how the pull feels under the fingers when pulling doors or drawers open.
• The 9/16 inch base dimensions define the footprint of each mounting post, which matters when covering minor blemishes around existing holes on replacement jobs.

Mounting Dimensions And Fit For Harmony Pull

The 3 inch center to center drilling of this Harmony pull sets a standard layout that works wherever 3 inch hole spacing is present or specified on the drawing. The 8-32 x 1 inch screw size aligns with common cabinet door and drawer front thicknesses, supporting straightforward through-bore mounting from the back side of the panel. The 3-11/16 inch overall length positions the grip slightly past the drilled holes, which helps center the hand over the hardware during pull action. A 1-1/8 inch projection gives the pull enough stand-off to clear typical door and drawer front edge profiles while still keeping the hardware close to the cabinet face for a compact look. The 9/16 inch base dimensions at each end define the contact area against the cabinet surface for stable mounting.

Using The Berenson Harmony Pull In Real Projects

Where This Harmony Series Pull Fits Best

The Berenson Harmony Series 3 inch center to center Vintage Nickel pull fits cabinet layouts that are designed around 3 inch hole spacing on doors and drawers. The zinc die cast construction suits interior cabinetry where a metal pull is preferred for everyday gripping and operation. The overall 3-11/16 inch length allows this pull to sit comfortably on doors, standard drawer fronts, and many face frames without overpowering the panel. The Vintage Nickel finish coordinates visually with other nickel-finished decorative hardware in the same space, helping maintain a consistent appearance across the project. The 11/16 inch width gives the pull a balanced front profile that works on both traditional and more streamlined cabinet styles while still presenting enough surface to grab securely.

Details That Support Consistent Alignment And Pull Action

The 3 inch center to center mounting pattern on this Berenson Harmony cabinet pull supports repeatable drilling and hardware alignment across banks of cabinets, which helps maintain straight sightlines along doors and drawers. The 9/16 inch base dimensions at each end provide a defined footprint that seats cleanly against the cabinet surface, aiding in consistent placement over each set of holes. The 1-1/8 inch projection determines how far the grip stands off the front, guiding hand clearance and reducing finger contact with the cabinet face during operation. The 3-11/16 inch total length centers the gripping area over the mounting holes so force transfers directly through the fastened points when opening doors or drawers. The zinc die cast material forms a single-piece pull body that works with the 8-32 x 1 inch screw size to create a solid mounted handle for daily cabinet use.

Answers To Common Harmony Pull Selection Questions

Selecting This Harmony Pull For Your Next Job

The Berenson Harmony Series 3 inch center to center Vintage Nickel pull combines zinc die cast construction, a 3-11/16 inch overall length, and a 1-1/8 inch projection to support everyday cabinet door and drawer operation. The 3 inch drilling pattern and 9/16 inch base dimensions help maintain consistent alignment across multiple fronts on a project. The Vintage Nickel finish and 11/16 inch width provide a balanced appearance that works alongside other nickel-finished decorative hardware in the same room. For projects built around 3 inch center to center layouts, this Harmony pull offers a defined set of dimensions that simplify planning and installation.