Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Harmony pull 128mm center to center describes a Berenson Corporation Harmony Series cabinet handle designed around a precise 5-1/16 inch center to center drilling. This fixed spacing lets installers align new cabinet and drawer fronts to a consistent layout across a run. The pull is made from zinc die cast material, which provides a rigid body that holds its shape when cabinets are opened and closed repeatedly. A vintage nickel finish gives the pull a specific nickel tone that visually complements matching decorative hardware and moldings in the same finish family. Overall handle length of 5-11/16 inch means the grip extends slightly beyond the boring pattern, offering hand clearance on typical cabinet doors and drawers. A projection of 1-1/8 inch sets the handle off the face frame enough to grip easily while keeping the pull close to the surface for a streamlined profile.
The 5-1/16 inch center to center dimension is the critical drilling distance for this pull, guiding where to place two mounting holes on each door or drawer front. Working from this measurement keeps hardware runs straight and even. The 5-11/16 inch overall length shows how much handle will sit across the panel, helping installers align the pull with rail widths and panel proportions. A 1-1/8 inch projection value describes the front-to-back offset from the door surface, which determines how much finger space stands between the handle and cabinet face. With an 11/16 inch width through the grip area, the pull occupies a modest strip of surface, leaving surrounding door detail visible. The 9/16 inch base size at each mounting point identifies the footprint where the handle rests on the cabinet face for firm contact.
This Berenson Harmony Series pull is designed for use on cabinet doors and drawers where a 5-1/16 inch (128 mm) center to center boring pattern is specified. That fixed spacing lets a shop or installer repeat the same layout across an entire kitchen, bath, or built-in run without changing jigs. The 5-11/16 inch overall length gives the pull enough reach to sit comfortably on common drawer front widths, while still fitting on narrower doors where a mid-sized handle is desired. With a 1-1/8 inch projection, the pull stands out from the face far enough that fingers can wrap behind the bar on both framed and frameless cabinet constructions. An 11/16 inch width keeps the profile lean, which is useful where door styles or applied moldings already add visual detail and installers want the hardware to sit neatly within that design.
The 5-1/16 inch center to center drilling dimension works with common boring setups, supporting consistent results when hardware is repeated dozens of times on a job. The 9/16 inch base size at each end defines a tight contact area that sits cleanly on flat cabinet faces, helping the pull seat squarely when tension is applied during daily use. Zinc die cast construction gives the pull a solid feel as a single formed piece, so doors and drawers open with a stable grip every time. The vintage nickel finish keeps the color and surface character aligned with other vintage nickel hardware in the same space, simplifying visual coordination across hinges, knobs, and additional pulls in the Harmony line. Together, these defined dimensions and materials let installers plan layouts, drilling, and visual alignment in advance and repeat that setup from cabinet to cabinet.
The Berenson Harmony pull uses a 5-1/16 inch (128 mm) center to center drilling, which sets the exact distance between mounting holes on cabinet doors and drawers.
The Harmony Series 9578-1VTN-P pull has an overall length of 5-11/16 inch, so the handle extends slightly beyond the mounting holes for a comfortable gripping area.
This vintage nickel cabinet pull has a projection of 1-1/8 inch, setting the handle off the cabinet face to create usable finger clearance during opening.
The Berenson Harmony Series pull is made from zinc die cast material, providing a solid metal body for repeated cabinet door and drawer operation.
This 5-1/16 inch center to center pull has a vintage nickel finish, which establishes the specific nickel tone used to coordinate with matching cabinet hardware.
The cabinet handle has an 11/16 inch width through the pull body, providing a defined gripping surface without covering too much of the cabinet face.
The Berenson Harmony Series 5-1/16 inch (128 mm) center to center vintage nickel pull brings together defined drilling dimensions, zinc die cast construction, and a matching Harmony family identity. Those details support consistent cabinet layouts and coordinated finishes across doors and drawers using this handle.
