Berenson Harmony Series 6-5/16" (160 mm) Center to Center Vintage Nickel Pull, - 9579-1VTN-P

Berenson Harmony Series Pull For Cabinets

Berenson Harmony Series pull gives cabinets and drawers a coordinated look by using a 6-5/16 inch (160 mm) center to center mounting layout that aligns with common drilling patterns. The pull is made from zinc die cast, which provides a solid metal feel that supports frequent everyday use on working cabinet doors and drawers. Its Vintage Nickel finish adds a muted metallic tone that blends with many hinge and appliance finishes, helping projects maintain a consistent appearance across the run of cabinets. The pull measures 6-7/8 inches in overall length, so it spans wider drawer fronts comfortably while leaving useful grip clearance at the sides. A 1-1/8 inch projection provides hand space between the hardware and the cabinet face, which supports a full finger grip when opening heavier drawers. The 11/16 inch width and 9/16 inch base dimensions create a defined footprint on the door or drawer surface, helping layout lines stay clean and predictable along a bank of fronts.

Key Harmony Cabinet Pull Details For Projects

• The 6-5/16 inch (160 mm) center to center size positions mounting points at a consistent distance, which supports straight runs of pulls across multiple doors and drawers.
• The zinc die cast material creates a metal body that stands up to repeated handling on working cabinets in kitchens, shops, or built-ins.
• The Vintage Nickel finish adds a controlled, aged nickel tone that coordinates with many decorative hardware and hinge finishes on the same installation.
• The 6-7/8 inch overall length adds visual proportion to wider doors and drawers, helping hardware scale with larger cabinet fronts.
• The 1-1/8 inch projection provides space for fingers behind the pull, which aids grip when opening heavier or deeper drawers.
• The 11/16 inch width and 9/16 inch base dimensions define a compact footprint that fits well on rail-and-stile frames or narrow drawer fronts.

Mounting Dimensions For Harmony 160mm Pull

The Harmony 160mm center to center pull uses a 6-5/16 inch mounting span, which sets the hole locations for boring or drilling on cabinet doors and drawer fronts. With a 6-7/8 inch overall length, the ends of the pull extend slightly beyond the hole centers, creating balanced margins at each side of the grip area. The pull projects 1-1/8 inches from the cabinet surface, providing clearance for fingers while controlling how far hardware stands off the face. An 11/16 inch width and 9/16 inch base dimensions keep the contact area compact, so the pull seats neatly on narrow rails or slab fronts without crowding surrounding edges and reveals.

Using The Vintage Nickel Harmony Pull In Work

Where This Berenson Harmony Series Pull Fits Best

The Berenson Harmony Series 6-5/16 inch center to center Vintage Nickel pull fits cabinets and drawers that are laid out for a 160 mm or 6-5/16 inch drilling pattern, keeping hardware locations uniform across a project. Its 6-7/8 inch overall length works well on medium to wide drawer fronts, adding enough bar length for a centered hand grip. The 11/16 inch width and 9/16 inch base dimensions let the pull sit comfortably on face-frame rails or on frameless slab fronts without covering too much surface, which helps maintain visible wood grain or paint detail. With a Vintage Nickel finish, the pull supports projects that call for a softer, worn-in nickel tone rather than a bright chrome look, helping tie in other Vintage Nickel or similar metal elements in the room.

Details That Support Consistent Pull Installation

The Harmony 160mm center to center pull uses a defined 6-5/16 inch mounting span, which simplifies layout when repeating hole locations across banks of doors and drawers. Its 1-1/8 inch projection controls how far the grip stands off the face, supporting comfortable hand clearance while limiting how much the hardware protrudes into walkways. The zinc die cast construction gives the pull a uniform casting, which supports consistent seating against the cabinet surface at each 9/16 inch base. An 11/16 inch width keeps the pull visually aligned over rails and stile centers, assisting in repeatable placement from cabinet to cabinet. The Vintage Nickel finish is applied across the zinc die cast body, so all visible faces present the same tone along the full length of the 6-7/8 inch pull.

Common Questions About Harmony Vintage Nickel Pull

Select This Harmony Pull For Matching Layouts

The Harmony 6-5/16 inch (160 mm) center to center Vintage Nickel pull from Berenson Corporation provides a defined mounting span, 6-7/8 inch overall length, and 1-1/8 inch projection that work together for consistent cabinet layouts. With zinc die cast construction, Vintage Nickel finish, 11/16 inch width, and 9/16 inch base dimensions, it fits projects needing coordinated decorative hardware. Use this pull when the drilling pattern, finish choice, and footprint match the cabinet doors and drawers planned for the job.