
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
18 inch beveled hook rack describes a Traditional Series wall hook solution built around an 18 inch pine beveled rack with hooks, so you get a defined hanging span that suits typical entry, mudroom, or closet wall sections. The rack uses pine, giving you a workable wood base for aligning with other decorative hardware on built-ins or painted casework. The rack is finished in white, which visually separates the mounting rail from the hanging items and coordinates with common trim and cabinet colors in woodworking projects. Six prongs on the rack spread hanging points across the 18 inch length, so loads such as coats, bags, or shop aprons can be spaced to reduce crowding. The hooks are finished in satin nickel, providing a contrasting metal look that fits decorative hardware layouts where satin nickel knobs or pulls are already in place.
The 4-1/4 inch overall projection sets a known working depth from wall to outer hook point, useful when lining this Traditional Series rack under cabinets or along passage walls where door swings have to clear hanging items. The 13/16 inch rack projection describes the rail standoff, which helps when matching to existing molding thickness or scribing to paneled surfaces. With a 4 inch rack height inside a 5-1/2 inch overall height, there is defined wood face above and below the hooks, supporting a balanced visual band when the rack is aligned with nearby decorative hooks or pulls. The 7/16 inch overall width keeps the pine beveled rack visually light, which can matter on long runs of decorative hardware across casework.
This Amerock Corporation Traditional Series piece is classified under decorative hooks, so it suits woodworking projects where appearance and function both matter, such as built-in storage, closet interiors, or wall panels. The 18 inch pine beveled rack with hooks provides a defined segment length, letting installers repeat modules along a hallway or locker run with predictable spacing. The white rack color works alongside painted trim or cabinet faces, so it can sit on stiles, rails, or finished wall board without visually dominating other decorative hardware. Satin nickel on the six prongs coordinates with satin nickel hardware elsewhere, helping carry a consistent finish from door and drawer fronts onto open hanging zones. With 5-1/2 inches of overall height, the rack fits between common trim elevations, making it suitable over wainscoting or beneath shelves where vertical room is limited. Because the rack belongs to the Traditional Series, it aligns stylistically with other Amerock decorative hooks in similar profiles for cohesive layouts.
The 18 inch rack length and six prongs create an even spread of hanging points, so installers can predict how items will occupy space along a wall and coordinate multiple racks without guesswork. The 4 inch rack height offers a practical mounting band for placing fasteners into solid backing while keeping the visible pine face proportionate above and below the satin nickel hooks. With a 7/16 inch overall width and 13/16 inch rack projection, the rail stays compact, which supports consistent alignment against cabinetry sides or finished panels in tight layouts. The 4-1/4 inch overall projection gives a known clearance value for planning around door swings or adjacent casework, reducing surprises when integrating the rack into completed woodworking. As a decorative hardware piece from Amerock Corporation, identified by manufacturer part number HR55656WG10, the rack can be specified reliably in project documents and reordered consistently when repeating the detail across multiple rooms or jobs.
The 18 inch beveled hook rack has an overall height of 5-1/2 inches, an overall width of 7/16 inch, an overall projection of 4-1/4 inches, and a rack length of 18 inches, which defines its wall space.
The overall projection of 4-1/4 inches describes how far the hook tips extend from the wall, and the 13/16 inch rack projection defines how much the pine rail itself stands off the mounting surface.
The hook rack uses a pine beveled rack in white with satin nickel hooks, so the wood rail provides the base while the satin nickel prongs deliver the metal hanging points and contrasting finish.
The Traditional Series rack is described as a 6 prong design, so it provides six separate hanging points along the 18 inch length for spreading coats, bags, or similar items.
HR55656WG10 is the Amerock Corporation manufacturer part number for this Traditional Series 18 inch pine beveled rack with hooks, which allows clear identification for ordering and specifying.
The product is listed under decorative hooks in decorative hardware and moldings, so it can be scheduled alongside other visible hardware elements in cabinetry and woodworking projects.
This Traditional Series 18 inch pine beveled rack with hooks combines a white rack and satin nickel prongs to give a clearly dimensioned decorative hook solution for wall or cabinet projects. With specified overall height, width, rack length, and projection values, you can plan locations in closets, mudrooms, or built-ins around known clearances and hanging reach. The Amerock Corporation HR55656WG10 designation ties the rack to a traceable part number that suits repeat work or documented project schedules. For jobs requiring decorative hooks organized on a fixed-length rail, this 6 prong rack offers a straightforward option grounded in defined dimensions and finishes.
Sold In: 1 Each