Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top BLUMOTION hinge is engineered for full overlay doors that need a restricted 95 degree swing, including narrow doors and aluminum-frame cabinet fronts, on both face-frame and frameless cabinets. It mounts with screws and delivers integrated soft-close in a nickel finish.
Most concealed hinges open to 110 degrees, which is the right swing for a standard wood door. Narrow doors and aluminum-frame fronts are a different story: a wider arc can twist the frame, stress the cup seat, or send the door edge into an adjacent surface. The 95 degree opening on this hinge is the engineering solution for those situations. It limits the swing precisely enough to protect the door and the cabinet without restricting everyday access. The 35mm cup bores into the door in the standard way, and the arm clips to a separately purchased Blum base plate mounted on the cabinet.
The hinge body is plated steel in a nickel finish. Nickel works across a wide range of cabinet styles and sits naturally alongside brushed or satin metal pulls, slides, and other visible hardware. The screw-on mounting connects the hinge arm to the plate using standard wood screws rather than the press-in system holes that INSERTA mounting requires. That makes this version the practical choice for any cabinet that lacks pre-drilled 5mm system holes, including site-built boxes, older cabinets, and custom face-frame work where the 32mm system was never laid out. BLUMOTION soft-close is built into the arm, so there is no separate damper to source or fit.
This hinge is a strong fit for cabinet shops and installers working with aluminum-frame fronts, glass-insert doors in narrow aluminum profiles, or any overlay door where the full 110 degree swing creates clearance or structural concerns. It suits both frameless European boxes and face-frame cabinets, which makes it a single-SKU answer across mixed job sites. Designers specifying handleless fronts with aluminum extrusions will find the 95 degree angle keeps the door geometry intact. For a standard wood door where the full swing is not a problem, the 110 degree version of this hinge is the more typical choice.
Narrow doors and aluminum-frame fronts can warp, flex, or collide with adjacent surfaces at a full 110 degree swing. The 95 degree opening is the correct geometry for those doors, not a limitation. For a standard wood door without clearance concerns, the 110 degree version is the usual pick.
No system holes are needed. The plate screws directly to the cabinet side or face-frame stile with standard wood screws, so it works on any cabinet regardless of how it was built.
No. The hinge arm clips to a Blum base plate that is sold separately. Match a Blum CLIP top plate to your cabinet type and door position before ordering.
No. Blum CLIP top hinges work only with Blum plates. Plates are brand and series specific, and a plate from another manufacturer will not engage the Blum arm correctly.
When the job calls for full overlay doors with a controlled swing, integrated BLUMOTION soft-close, and a nickel finish that works across cabinet styles, this hinge covers the install without requiring a pre-drilled cabinet.
Sold In: 1 Each
