FlexTape LED Daylight Tape Light For Runs

FlexTape LED 1.5W daylight tape light is a 20 foot roll of Tresco LED tape lighting that provides a long, continuous run from a single product, which helps lay out extended lighting lines along cabinets, displays, or casework. The tape operates at 1.5 watts per foot, so power demand can be calculated by multiplying the run length by this value, which matters when sizing 12V power supplies on multi-run jobs. This FlexTape is a 12V system, so it fits projects built around low-voltage layouts in shops, showrooms, or residential millwork. The tape produces 6500K daylight color, which delivers a cool daylight appearance useful where bright, neutral-looking task or display lighting is required. The product is part of Tresco Lighting LED tape lighting, so it aligns with Tresco layouts that rely on consistent light character across different fixtures.

Key FlexTape LED Details For Job Planning

• This FlexTape is stocked in 20 foot rolls, so a single roll can cover longer straight or gently curving runs without breaks, which reduces connection points along cabinets or shelving.
• The tape uses 1.5 watts per foot, allowing straightforward load calculations across the full 20 foot maximum continuous run, which simplifies transformer and circuit planning on 12V lighting systems.
• A 3M adhesive peel and stick back provides direct mounting to clean, suitable surfaces, which speeds installation compared with separate mounting tracks on many casework or display jobs.
• The tape can be cut every 3 inches, giving fine length adjustments at the field level, which helps fit exact cabinet or niche dimensions without leaving dark gaps or excess length.
• The system supports straight feed, T-connector, or right-angle connector options, so installers can route power and direction changes cleanly around corners or junctions in a run layout.
• The 20 foot maximum length for a continuous run establishes a clear upper limit for one powered length, which guides how many separate runs and feed points are laid out on a project.

LED Tape Mounting And Cutting For Clean Fits

This Tresco FlexTape LED tape lighting uses a 3M adhesive peel and stick back for mounting, so the installer can press the tape directly to the chosen surface, which supports neat alignment along cabinet edges or recesses. The ability to cut the tape every 3 inches creates many shortening points, which lets each section be trimmed to match specific cabinet widths, alcoves, or display bays. The product is rated for a 20 foot maximum continuous run, so any layout beyond that length is divided into multiple runs, which controls voltage drop and light consistency along each segment. Because this tape is a 12V system at 1.5 watts per foot, the electrical load for each run can be matched to appropriately sized Tresco transformers and control components.

Using Tresco FlexTape LED In Real Projects

Where This 20 Foot FlexTape Roll Fits

This 20 foot roll of Tresco FlexTape LED tape lighting fits projects that call for longer, low-voltage linear lighting along cabinets, displays, or similar surfaces, because the full length can be used as one continuous run. The 6500K daylight output supports installations where a daylight-like color appearance is preferred, such as retail showcases or detailed work areas. The ability to cut every 3 inches means the same roll can be divided into multiple segments, each sized to its location, which suits multi-bay cabinet lines or repetitive casework sections. Straight feed, T-connector, and right-angle connector options support different layout patterns, allowing power to branch or turn corners while maintaining the same tape specification across the installation.

Details That Support Repeatable Tape Results

The 1.5 watts per foot rating on this FlexTape provides a consistent basis for planning power, so each new run can be sized in the same way, which supports repeatable layouts across multiple rooms or projects. The 20 foot maximum length for a continuous run defines a reliable working limit, so installers can repeat run lengths within that range while expecting comparable performance from each section. Using Tresco transformers, power cables, connecting cables, and switches with these Tresco fixtures aligns the tape with its intended power and control components, which supports stable operation across the rated 25,000 hour average life. The 3M adhesive backing keeps the mounting method consistent from job to job, which helps crews follow the same installation workflow when lining interiors, undersides, or display frames with this LED tape lighting.

Common FlexTape LED Daylight Tape Questions

Select This FlexTape LED For Daylight Runs

The FlexTape LED 1.5W daylight tape light 20 foot roll from Tresco Lighting combines 12V operation, 1.5 watts per foot load, and 6500K daylight output, which suits extended linear lighting in cabinets or displays. The 3M adhesive peel and stick back and 3 inch cut points give installers straightforward ways to fit each run exactly where needed. The 20 foot maximum continuous run and support for straight feed, T-connector, and right-angle connector layouts let you plan clear, repeatable circuits across a project. For jobs built around Tresco transformers, power cables, connecting cables, and switches, this LED tape provides a matching tape lighting option that aligns with Tresco systems.