Rev-A-Shelf FlexTape LED Lights 20' Rolls, 1.5 watts per foot, Tresco Lighting L-LED-FLXTPE-WROLL

Rev-A-Shelf FlexTape LED Lights For Runs

Rev-A-Shelf FlexTape LED Lights 20' Rolls give you a continuous LED tape lighting option for long cabinet, display, or task lighting runs where a single roll simplifies layout. The 20 foot roll length lets you plan extended straight or gently curving runs without piecing together short sections, which helps maintain a consistent light line along the full length of a cabinet or shelving run. Operating at 12V, this FlexTape works with low-voltage layouts commonly used in residential and commercial millwork, so it fits naturally into standard 12V lighting circuits. The tape uses 1.5 watts per foot, so you can quickly calculate total load for a run by multiplying your installed length by 1.5, which helps with driver sizing and circuit planning. The 2700K color temperature provides a warm light tone that complements typical residential wood finishes and creates comfortable accent or task lighting in built-in cabinetry.

Key FlexTape Details That Support Projects

• The 20 foot roll format supports longer continuous LED tape lighting runs, which reduces splices and helps maintain an even appearance across cabinet or display installations where a uniform light line matters.
• The 1.5 watts per foot power draw defines the electrical load of each section, allowing straightforward total wattage calculations for your chosen run length so driver sizing and power distribution can be laid out accurately.
• The 12V rating matches common low-voltage lighting systems, letting this LED FlexTape integrate into standard 12V cabinet and casework lighting designs that already rely on low-voltage wiring practices.
• The 2700K color temperature establishes a warm white output that works well with many wood tones and interior finishes, supporting comfortable under-cabinet, shelf, or accent lighting in kitchens or other built-in applications.
• The Tresco Lighting brand and L-LED-FLXTPE-WROLL part number tie this FlexTape to an identifiable LED tape lighting line, which helps match future orders and coordinate with related Tresco Lighting components on a project.

FlexTape LED Tape Lighting Installation Focus

The 20 foot length of Rev-A-Shelf FlexTape LED Lights 20' Rolls helps streamline installation planning, because a single roll can span many standard cabinet runs without joints, improving alignment along face frames or case sides. With a 12V rating, this tape fits into low-voltage layouts where wiring and connections are designed around 12V systems, so runs can be grouped with other 12V cabinet lighting on the same project. The 1.5 watts per foot draw means you can size power supplies around expected maximum run lengths using simple math, which reduces trial-and-error during layout. The warm 2700K light output helps finished installations feel visually consistent when this tape is used across multiple cabinet sections in the same room.

Using This Tresco FlexTape In Real Projects

Where This LED Tape Lighting Works Well

Rev-A-Shelf FlexTape LED Lights 20' Rolls are suited to projects that call for continuous LED tape lighting along cabinets, shelves, or similar millwork where uninterrupted length is valuable. The 20 foot roll format supports layouts that run through several adjacent cabinet sections without breaks, which is helpful when lighting the full span of a wall cabinet line or a long base cabinet toe-kick. Because the tape is rated at 12V, it aligns with low-voltage cabinet and display lighting schemes that already standardize on 12V parts, letting this tape serve as a primary linear light source in those systems. The 2700K color temperature gives the illuminated surfaces a warm appearance that fits many kitchen, bath, and built-in applications where softer light is desired around wood doors, drawer fronts, and interior shelving.

Details That Support Consistent Lighting Results

The 1.5 watts per foot power use of this FlexTape provides a predictable rule-of-thumb for load calculations, so run lengths can be chosen with confidence that total wattage will match available 12V power supplies for the project. Because this is a continuous 20 foot roll, installers can cut or plan segments up to that length from a single product reference, which simplifies ordering and repeat work when the same Tresco Lighting tape is used across multiple jobs. The L-LED-FLXTPE-WROLL manufacturer part number clearly identifies this specific 2700K, 12V, 1.5 watts per foot FlexTape variant, supporting accurate specification on drawings and purchase lists. Using the same Rev-A-Shelf FlexTape LED Lights 20' Rolls across related areas in a space helps maintain uniform 2700K color and light character from one cabinet run to the next.

Common Questions About Tresco FlexTape Details

Select This FlexTape For 12V Warm Runs

Rev-A-Shelf FlexTape LED Lights 20' Rolls combine a 20 foot length, 12V rating, 1.5 watts per foot draw, and 2700K warm tone into one consistent tape lighting option. When your cabinet or shelving layout calls for a single low-voltage LED tape reference that can cover extended runs while keeping color and power characteristics consistent, this Tresco Lighting L-LED-FLXTPE-WROLL model offers a clearly defined 20 foot, 2700K choice for planning those warm, continuous 12V lighting lines.