Rev-A-Shelf Pockit PLUS LED Puck Lights 3 Watt, Tresco Lighting L-POC-3LEDSFR-WNI-

Rev-A-Shelf Pockit PLUS LED Puck Lighting Use

Rev-A-Shelf Pockit PLUS LED Puck Lights 3 Watt, Tresco Lighting L-POC-3LEDSFR-WNI- describes a 3 watt LED puck light from Tresco Lighting, so you get a compact fixture that delivers focused illumination where cabinets or displays need it most. The TXT 3W,12V,POWER POCKIT, 3000K, NICKEL description confirms a 12V power requirement and 3 watt output, which supports low-energy cabinet or display lighting while tying into common low-voltage systems. The 3000K value identifies a warm white color tone, which helps create comfortable task lighting that still renders detail clearly on worktops and shelving. The nickel detail in the description points to a nickel-colored exterior, letting the puck visually coordinate with typical cabinet hardware and hinges in the same finish family. As a product in the Lighting | LED Puck Lights category, it serves as a dedicated point-source light for targeted areas rather than broad room illumination.

Key LED Puck Details For Cabinet Projects

• The SAP description TXT 3W,12V,POWER POCKIT, 3000K, NICKEL defines the puck as a 3 watt, 12V unit in a nickel color, giving installers a concise electrical and finish profile to match with existing low-voltage layouts and visible cabinet hardware.
• The Web Description calling it Rev-A-Shelf Pockit PLUS LED Puck Lights identifies it as part of the Pockit PLUS family, helping shops align this light with other Rev-A-Shelf and Tresco components specified across a project run.
• The Category listing as Lighting | LED Puck Lights confirms it is a puck-style LED fixture, which supports layout planning for under-cabinet, in-cabinet, or display lighting where small, discrete light sources are preferred.
• The Manufacturer Part # L-POC-3LEDSFR-WNI- gives an exact ordering and replacement reference, reducing ordering errors when repeating the same light across multiple jobs or during later service work.

Installation Planning For This 12V LED Puck

The TXT 3W,12V,POWER POCKIT description confirms that this Pockit PLUS LED puck operates on 12V, so it aligns with standard low-voltage lighting runs often used in cabinet and display installations. The 3 watt rating defines a modest power draw, which helps in calculating total load on a given 12V circuit when multiple puck lights are planned along one run. The nickel designation in the same description provides a finish reference, guiding placement where the fixture edge may remain visible against face frames, shelves, or ceiling panels. Being categorized as an LED Puck Light means the fixture is intended for compact mounting areas, which supports tight spacing under cabinet bottoms or inside shallow cases where larger fixtures would conflict with doors or hardware.

How This Tresco LED Puck Fits Real Jobs

Where This 3000K Nickel Puck Light Works

The SAP description TXT 3W,12V,POWER POCKIT, 3000K, NICKEL positions this Tresco Lighting puck in the warm-white range at 3000K, which supports use anywhere comfortable but effective lighting is needed, such as over counters, inside cabinets, or in display niches. As an LED Puck Light in the Lighting | LED Puck Lights category, it is designed as a compact point source that fits easily beneath upper cabinets or on ceiling panels of cases, allowing installers to place light precisely over task areas or featured items. The 3 watt rating indicates a focused output level suited to accent and task applications instead of broad ambient lighting, so it can highlight work zones, shelving, or product groupings without overpowering the room. The nickel designation in the TXT description means the visible body presents a nickel appearance, which blends naturally with common nickel-finish hinges, pulls, and other visible fittings throughout many cabinet lines.

Why The 3W 12V Design Supports Consistent Results

The TXT 3W,12V,POWER POCKIT detail spells out a 3 watt, 12V design, helping installers integrate the puck into established low-voltage systems that already use 12V drivers and distribution, so circuit calculations and wiring layouts remain straightforward. That same 3 watt rating simplifies load planning when repeating the Rev-A-Shelf Pockit PLUS LED Puck Lights 3 Watt, Tresco Lighting L-POC-3LEDSFR-WNI- across a run, because each light draws a clearly defined portion of the available capacity. The specified 3000K color temperature keeps output consistent from puck to puck, supporting uniform color across long banks of cabinets or multiple display bays using the same model. The Manufacturer Part # L-POC-3LEDSFR-WNI- ties these characteristics to a single code, reducing mis-selection when reordering for expansions or matching replacement fixtures on an existing installation.

Common Questions About This LED Puck Light

Select This Puck Light For Targeted Cabinet Use

The Rev-A-Shelf Pockit PLUS LED Puck Lights 3 Watt, Tresco Lighting L-POC-3LEDSFR-WNI- combines a 3 watt, 12V design with 3000K warm white output and a nickel appearance, giving cabinet and display projects a defined, repeatable lighting component. The classification under Lighting | LED Puck Lights confirms its role as a compact point-source fixture suitable for focused under-cabinet, in-cabinet, or display illumination where controlled beams and discreet form factor are important. Using the exact Manufacturer Part # L-POC-3LEDSFR-WNI- when specifying or reordering helps maintain consistent color, power characteristics, and visible finish across all locations that rely on this puck model.