
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pockit 120L non-linkable LED puck light is a 3 watt, 120V puck fixture in a white finish that delivers warm white 2700K light, giving installers a compact hardwired-style solution for residential or light commercial task and accent lighting needs. The Pockit 120L LED plugs directly into a standard household 120V AC box, so it ties into typical room circuits without separate low-voltage drivers, simplifying layout where line-voltage boxes are already planned. The warm white 2700K bulb color produces a softer tone that aligns with traditional incandescent-style kitchens and living spaces, helping projects maintain a consistent visual temperature across fixtures. Its LED bulb life of 25,000 hours means the puck is designed to operate for many years under normal use, which reduces service calls and fixture change-outs on completed jobs. As a non-linkable version, this light functions as a stand-alone point source for focused illumination where individual control or isolated placement is preferred.
This Tresco Lighting puck uses standard household 120V AC power, so it integrates with existing junction boxes without separate transformers in the run, which streamlines installation in typical framed walls and cabinet builds. The fixture is dimmable by standard ELV dimmers, giving designers and electricians a way to coordinate it with other ELV-controlled loads on the same zone for consistent dimming behavior. With a bore hole diameter of 3-1/4 inch, it can recess into properly sized cutouts or be surface mounted, so shop crews can decide on-site whether to hide the body in a cavity or express it on the surface. The 10 foot power cord extends from the puck to its connection point, offering routing flexibility inside cabinets, behind valances, or across runs where direct alignment with a box is not practical.
This 3 watt, 120V LED puck from Tresco Lighting is suited to locations that already have or plan for a standard household 120V AC box, allowing it to operate as part of a line-voltage lighting layout. The warm white 2700K color temperature supports installations in kitchens, bathrooms, and living areas where a softer, residential-style tone is desired over cooler task lighting, helping millwork lighting blend with ceiling fixtures. Its 3-1/4 inch bore hole size works well for recessing into cabinet bottoms, display soffits, and niche ceilings, giving clean appearances when the fixture is set flush. Because the puck can also be surface mounted, it adapts to solid surfaces or shallow cavities where a full recess is not possible, making it suitable for retrofits on finished carpentry or architectural panels.
The 25,000 hour LED bulb life rating supports long-term operation in areas that see daily use, which is important for cabinet and display lighting that clients expect to function for years without intervention. Being dimmable by standard ELV dimmers allows the Pockit 120L non-linkable LED puck light to participate in controlled lighting scenes, so installers can balance brightness between these pucks and other ELV-driven fixtures on the same control. The non-linkable design keeps each puck electrically independent, which can simplify troubleshooting and circuit planning when each unit is treated as its own point load. The white finish lets the fixture visually blend into light-colored cabinets or ceilings, which helps attention stay on the illuminated surface rather than the hardware. Optional linkable cords and an ON/OFF switch, when used, give additional layout and control choices around the core puck, while the note that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables, and switches highlights that the system is engineered as a matched set for performance.
The Pockit 120L LED plugs directly into a standard household 120V AC box, so it runs on typical line-voltage circuits used in residential and light commercial spaces.
This Tresco Lighting puck is dimmable by standard ELV dimmers, allowing light levels to be adjusted as part of ELV-controlled lighting zones.
The bore hole diameter is 3-1/4 inch, giving a clear size for recessing the puck into cabinet bottoms, soffits, or drywall niches.
This puck can be recess or surface mounted, so it works in both deeper cavities and shallow or solid-surface locations.
The bulb color is warm white at 2700K, offering a softer tone similar to traditional warm lamps commonly used in residential spaces.
The bulb life is rated at 25,000 hours, supporting extended service in everyday-use areas such as kitchens, baths, and built-in displays.
The Tresco Lighting L-LPOC-3W-120NL-WWH-1 puck brings 3 watts of warm white 2700K LED light to standard 120V AC box locations, giving cabinetmakers and electricians a compact solution that matches residential color tones. Its 3-1/4 inch bore hole sizing and recess or surface mount flexibility support a wide range of cabinet and millwork conditions without changing fixture type mid-project. With dimmable performance on standard ELV dimmers and a 25,000 hour bulb life rating, it suits jobs that demand adjustable, long-running accent or task lighting. For projects handled through Wurth Baer Supply, this puck light fits neatly into line-voltage layouts where a dedicated, non-linkable Tresco LED fixture is needed.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSLFPOC-HWBADPBL1 Mfr# L-FPOC-HWB-ADP-BL-1 | Adaptor Starter Cord for Hardwire Box - Tresco Lighting L-FPOC-HWB-ADP-BL-1 | ||||
Sold in: 1 Each | RSLFPOCLINKA25BL-1 Mfr# L-FPOC-LINKA-25-BL-1 | Pockit 120-L/M Link/Extension Cord, 10", Black | ||||
Sold in: 1 Each | RSLFPOCLINKA60BL-1 Mfr# L-FPOC-LINKA-60-BL | Pockit® T104 Plastic Link Cord, 24", Black | ||||
Sold in: 1 Each | RSLHWBBLT5S1 Mfr# L-HWB-BL-T5-S-1 | Pockit 120-M 120V T5 Hardwire Box with On/Off Switch, 3.54", Black |